Hello Hans, You asked me in January that i mail to you this again in sometime because you didn't have time to look at it (new drivers were in development)!
I didn't test the latest kernel, because I didn't have a chance to get one of Secam DK sources, so maybe it is already fixed! And you suggested me that I would have to specify Secam D with v4l2-ctl, I didn't do it like that. I specified standard within vlc with a hex number for Secam D provided by v4l2-ctl. So I think that this is the same! Old mail: I have a problem with audio in Secam DK source. I use 2.6.19 linux kernel and trunk driver. Audio works but, it is a lot of noise in it. In fact is almost all noise (buzz), and in it a low volume actual sound from channel. I saw that one guy before had a problem with nicam sound in Secam source: http://www.gossamer-threads.com/lists/ivtv/users/32732?search_string=teletext;#32732 So I tried the same thing and it did the trick: options msp3400 debug=2 standard=0x04 With this option sound is perfect and without any noise at all. I gave it standard=0x04 because I looked what msp3400 detected before I set this option. I would like to say that I have four pvr 350 cards and all work the same, so it isn't defect card or something like that. I have logs with and without standard: options msp3400 debug=2 [ 22.489946] ivtv: ==================== START INIT IVTV ==================== [ 22.489953] ivtv: version 0.10.0 (development snapshot compiled on Fri 26 Jan 2007 01:25:06 PM CET) loading [ 22.489957] ivtv: Linux version: 2.6.19.2-iskratel SMP mod_unload 586 REGPARM [ 22.489960] ivtv: In case of problems please include the debug info between [ 22.489963] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [ 22.489966] ivtv: any module options, when mailing the ivtv-users mailinglist. [ 22.491433] ivtv0: Autodetected Hauppauge card (cx23415 based) [ 22.491575] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 22.491591] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 23.232995] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) [ 23.304639] ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) [ 23.533830] ivtv0: Encoder revision: 0x02050032 [ 23.543821] ivtv0: Decoder revision: 0x02020023 [ 23.608558] tveeprom 0-0050: Hauppauge model 48139, rev K257, serial# 8260736 [ 23.608562] tveeprom 0-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38) [ 23.608566] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) [ 23.608569] tveeprom 0-0050: audio processor is MSP4418 (idx 25) [ 23.608571] tveeprom 0-0050: decoder processor is SAA7115 (idx 19) [ 23.608574] tveeprom 0-0050: has radio, has IR remote [ 23.608577] ivtv0: Autodetected Hauppauge WinTV PVR-350 [ 23.637010] tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) [ 23.637098] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) [ 23.641500] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 23.712745] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) [ 23.946963] saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) [ 23.970403] msp3400 0-0040: rev1=0x0217, rev2=0x1243 [ 23.970408] msp3400 0-0040: mute=off scanning=no volume=58880 [ 23.973775] msp3400 0-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0) [ 23.973778] msp3400 0-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and autoselect [ 23.973805] msp3400 0-0040: msp34xxg daemon started [ 23.973809] msp3400 0-0040: msp34xxg thread: sleep [ 23.974840] ivtv0: Registered device video2 for encoder MPEG (4 MB) [ 23.976465] ivtv0: Registered device video34 for encoder YUV (2 MB) [ 23.976723] ivtv0: Registered device vbi2 for encoder VBI (1 MB) [ 23.977912] ivtv0: Registered device video26 for encoder PCM audio (1 MB) [ 23.978223] ivtv0: Registered device radio2 for encoder radio [ 23.979556] ivtv0: Registered device video18 for decoder MPEG (1 MB) [ 23.979675] ivtv0: Registered device vbi10 for decoder VBI (1 MB) [ 23.980163] ivtv0: Registered device vbi18 for decoder VOUT [ 23.981327] ivtv0: Registered device video50 for decoder YUV (1 MB) [ 24.037790] ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) [ 24.147199] tuner 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [ 24.147207] msp3400 0-0040: v4l2_int ioctl TUNER_SET_TYPE_ADDR, dir=-w (0x4004645a) [ 24.147215] msp3400 0-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c) [ 24.147220] msp3400 0-0040: mute=on scanning=no volume=58880 [ 24.156279] msp3400 0-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d) [ 24.156284] msp3400 0-0040: scart switch: in1 => 0 (ACB=0x0000) [ 24.157978] msp3400 0-0040: scart switch: in1 da => 1 (ACB=0x0c00) [ 24.159672] msp3400 0-0040: scart switch: in1 da => 2 (ACB=0x0c00) [ 24.161364] msp3400 0-0040: set source to 0 (0x320) for output 08 [ 24.163056] msp3400 0-0040: set source to 0 (0x320) for output 0c [ 24.164749] msp3400 0-0040: set source to 0 (0x320) for output 09 [ 24.166443] msp3400 0-0040: set source to 0 (0x320) for output 0a [ 24.168139] msp3400 0-0040: set source to 0 (0x320) for output 41 [ 24.169836] msp3400 0-0040: set source to 0 (0x320) for output 0b [ 24.175090] msp3400 0-0040: msp34xxg thread: wakeup [ 24.175094] msp3400 0-0040: thread: restart scan [ 24.179258] msp3400 0-0040: selected M (BTSC) modus [ 24.180948] msp3400 0-0040: set source to 0 (0x320) for output 08 [ 24.182638] msp3400 0-0040: set source to 0 (0x320) for output 0c [ 24.184327] msp3400 0-0040: set source to 0 (0x320) for output 09 [ 24.186019] msp3400 0-0040: set source to 0 (0x320) for output 0a [ 24.187707] msp3400 0-0040: set source to 0 (0x320) for output 41 [ 24.189394] msp3400 0-0040: set source to 0 (0x320) for output 0b [ 24.199498] msp3400 0-0040: started autodetect, waiting for result [ 24.284761] msp3400 0-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c) [ 24.284765] msp3400 0-0040: mute=off scanning=no volume=58880 [ 24.291274] msp3400 0-0040: v4l2_int ioctl TDA9887_SET_CONFIG, dir=-w (0x4004645c) [ 24.312166] msp3400 0-0040: detection still in progress [ 24.373789] msp3400 0-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618) [ 24.373801] msp3400 0-0040: thread: restart scan [ 24.373882] msp3400 0-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c) [ 24.373889] msp3400 0-0040: mute=on scanning=no volume=58880 [ 24.377986] msp3400 0-0040: selected PAL modus [ 24.384734] msp3400 0-0040: set source to 0 (0x320) for output 08 [ 24.387841] msp3400 0-0040: set source to 0 (0x320) for output 0c [ 24.389255] msp3400 0-0040: v4l2_int ioctl TDA9887_SET_CONFIG, dir=-w (0x4004645c) [ 24.390948] msp3400 0-0040: set source to 0 (0x320) for output 09 [ 24.392361] msp3400 0-0040: v4l2 ioctl VIDIOC_S_FREQUENCY, dir=-w (0x402c5639) [ 24.394053] msp3400 0-0040: set source to 0 (0x320) for output 0a [ 24.395746] msp3400 0-0040: set source to 0 (0x320) for output 41 [ 24.397438] msp3400 0-0040: set source to 0 (0x320) for output 0b [ 24.407587] msp3400 0-0040: started autodetect, waiting for result [ 24.502163] msp3400 0-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c) [ 24.502169] msp3400 0-0040: mute=off scanning=no volume=58880 [ 24.507154] msp3400 0-0040: thread: restart scan [ 24.507218] ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 [ 242.865915] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 242.865943] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 242.865957] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 242.865970] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 242.865987] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 242.866002] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 242.872099] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 242.872120] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 242.872134] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 242.872149] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 242.872164] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 242.872179] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 242.900479] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 242.902372] msp3400 0-0040: status=0x6, stereo=0, bilingual=0 -> rxsubchans=1 [ 242.902386] msp3400 0-0040: v4l2 ioctl VIDIOC_G_FREQUENCY, dir=rw (0xc02c5638) [ 242.904081] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 242.905966] msp3400 0-0040: status=0x6, stereo=0, bilingual=0 -> rxsubchans=1 [ 243.271398] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 243.271420] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 243.271436] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 243.271451] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 243.271466] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 243.271481] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 243.272022] msp3400 0-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c) [ 243.290799] msp3400 0-0040: v4l2_int ioctl VIDIOC_INT_AUDIO_CLOCK_FREQ, dir=-w (0x40046467) [ 243.567554] msp3400 0-0040: v4l2_int ioctl TDA9887_SET_CONFIG, dir=-w (0x4004645c) [ 243.647240] msp3400 0-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618) [ 243.647256] msp3400 0-0040: msp34xxg thread: wakeup [ 243.647259] msp3400 0-0040: thread: restart scan [ 243.651470] msp3400 0-0040: selected SECAM modus [ 243.653719] msp3400 0-0040: set source to 0 (0x320) for output 08 [ 243.654845] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 243.656576] msp3400 0-0040: set source to 0 (0x320) for output 0c [ 243.658380] msp3400 0-0040: set source to 0 (0x320) for output 09 [ 243.660156] msp3400 0-0040: set source to 0 (0x320) for output 0a [ 243.662048] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 243.662317] msp3400 0-0040: v4l2 ioctl VIDIOC_G_FREQUENCY, dir=rw (0xc02c5638) [ 243.662604] msp3400 0-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c) [ 243.662611] msp3400 0-0040: mute=on scanning=no volume=58880 [ 243.663785] msp3400 0-0040: set source to 0 (0x320) for output 41 [ 243.667171] msp3400 0-0040: set source to 0 (0x320) for output 0b [ 243.680681] msp3400 0-0040: started autodetect, waiting for result [ 243.683522] msp3400 0-0040: v4l2_int ioctl TDA9887_SET_CONFIG, dir=-w (0x4004645c) [ 243.684954] msp3400 0-0040: v4l2 ioctl VIDIOC_S_FREQUENCY, dir=-w (0x402c5639) [ 243.684970] msp3400 0-0040: thread: restart scan [ 243.689167] msp3400 0-0040: selected SECAM modus [ 243.690879] msp3400 0-0040: set source to 0 (0x320) for output 08 [ 243.692581] msp3400 0-0040: set source to 0 (0x320) for output 0c [ 243.694285] msp3400 0-0040: set source to 0 (0x320) for output 09 [ 243.695986] msp3400 0-0040: set source to 0 (0x320) for output 0a [ 243.697703] msp3400 0-0040: set source to 0 (0x320) for output 41 [ 243.699406] msp3400 0-0040: set source to 0 (0x320) for output 0b [ 243.709566] msp3400 0-0040: started autodetect, waiting for result [ 243.794069] msp3400 0-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c) [ 243.794078] msp3400 0-0040: mute=off scanning=no volume=58880 [ 243.799168] msp3400 0-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c) [ 243.799177] msp3400 0-0040: mute=off scanning=no volume=60535 [ 243.810913] msp3400 0-0040: detection still in progress [ 243.912638] msp3400 0-0040: detection still in progress [ 244.014346] msp3400 0-0040: detected standard: 6.5/5.85 L NICAM AM (0x0009) [ 244.016050] msp3400 0-0040: mute=off scanning=no volume=60535 [ 244.022836] msp3400 0-0040: msp34xxg thread: sleep [ 244.843901] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 244.845807] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 245.879246] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 245.881148] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 246.879938] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 246.881851] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 247.915432] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 247.917339] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 248.366712] ip_tables: (C) 2000-2006 Netfilter Core Team [ 248.915421] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 248.917347] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 249.952232] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 249.954197] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 250.974518] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 250.976448] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 252.024046] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 252.025961] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 253.060848] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 253.062744] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 254.060086] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 254.062011] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 255.096338] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 255.098242] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 255.157129] NET: Registered protocol family 17 [ 256.095648] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 256.097587] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 257.131408] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 257.133316] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 258.180645] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 258.182610] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 259.206268] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 259.208166] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 260.241154] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 260.243067] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 261.242881] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 261.244804] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 262.279296] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 262.281212] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 263.277840] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 263.279777] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 264.312882] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 264.314799] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 265.362604] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 265.364524] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 266.387473] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 266.389461] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 267.425296] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 267.427197] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 268.424173] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 268.426082] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 269.461215] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 269.463133] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 270.462294] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 270.464207] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 271.495329] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 271.497235] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 272.543535] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 272.545449] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 273.071791] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 273.071813] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 273.071827] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 273.071842] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 273.071857] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 273.071876] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 273.072387] ivtv0: ================= START STATUS CARD #0 ================= [ 273.128466] tveeprom 0-0050: Hauppauge model 48139, rev K257, serial# 8260736 [ 273.128474] tveeprom 0-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38) [ 273.128482] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) [ 273.128486] tveeprom 0-0050: audio processor is MSP4418 (idx 25) [ 273.128490] tveeprom 0-0050: decoder processor is SAA7115 (idx 19) [ 273.128494] tveeprom 0-0050: has radio, has IR remote [ 273.128536] tda9887 0-0043: Data bytes: b=0x14 c=0x6e e=0x4b [ 273.128568] tuner 0-0061: Tuner mode: analog TV [ 273.128574] tuner 0-0061: Frequency: 199.25 MHz [ 273.128579] tuner 0-0061: Standard: 0x00320000 [ 273.128601] saa7115 0-0021: Audio frequency: 48000 Hz [ 273.131114] saa7115 0-0021: Input: Composite 4 [ 273.131119] saa7115 0-0021: Video signal: broadcast/DVD [ 273.131124] saa7115 0-0021: Frequency: 50 Hz [ 273.131127] saa7115 0-0021: Detected format: SECAM [ 273.131132] saa7115 0-0021: Width, Height: 720, 576 [ 273.131166] saa7127 0-0044: Standard: 50 Hz [ 273.131170] saa7127 0-0044: Input: normal [ 273.131174] saa7127 0-0044: Output: S-Video + Composite [ 273.131179] saa7127 0-0044: WSS: disabled [ 273.131183] saa7127 0-0044: VPS: disabled [ 273.131187] saa7127 0-0044: CC: disabled [ 273.131207] msp3400 0-0040: v4l2 ioctl VIDIOC_LOG_STATUS, dir=-- (0x00005646) [ 273.133154] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 273.133161] msp3400 0-0040: MSP4418G-B3 rev1 = 0x0217 rev2 = 0x1243 [ 273.133166] msp3400 0-0040: Audio: volume 60535 [ 273.133171] msp3400 0-0040: Standard: 6.5/5.85 L NICAM AM (mono) [ 273.133175] msp3400 0-0040: Audmode: 0x0001 [ 273.133179] msp3400 0-0040: Routing: 0x00000000 (input) 0x00000044 (output) [ 273.133183] msp3400 0-0040: ACB: 0x0c00 [ 273.134070] ivtv0: Video Input: Tuner 1 [ 273.134074] ivtv0: Audio Input: Tuner 1 [ 273.134079] ivtv0: Video Output: S-Video + Composite [ 273.134081] ivtv0: Audio Output: A/V Audio Out [ 273.134084] ivtv0: Output Mode: None [ 273.134087] ivtv0: Tuner: TV [ 273.134090] ivtv0: Stream: MPEG-2 Program Stream [ 273.134094] ivtv0: VBI Format: No VBI [ 273.134097] ivtv0: Video: 720x576, 25 fps [ 273.134101] ivtv0: Video: MPEG-2, 4x3, Variable Bitrate, 4500000, Peak 5500000 [ 273.134107] ivtv0: Video: GOP Size 12, 2 B-Frames, GOP Closure, No 3:2 Pulldown [ 273.134111] ivtv0: Audio: 48 kHz, Layer II, 224 kbps, Stereo, No Emphasis, No CRC [ 273.134117] ivtv0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D Horizontal, 0 [ 273.134121] ivtv0: Temporal Filter: Manual, 8 [ 273.134124] ivtv0: Median Filter: Off, Luma [0, 255], Chroma [0, 255] [ 273.134128] ivtv0: Status flags: 0x00000040 [ 273.134131] ivtv0: Stream encoder MPEG: status 0x0118, 0% in use [ 273.134135] ivtv0: Stream encoder YUV: status 0x0000, 0% in use [ 273.134138] ivtv0: Stream encoder VBI: status 0x0000, 0% in use [ 273.134142] ivtv0: Stream encoder PCM audio: status 0x0000, 0% in use [ 273.134146] ivtv0: Stream decoder MPEG: status 0x0000, 0% in use [ 273.134150] ivtv0: Stream decoder VBI: status 0x0000, 0% in use [ 273.134154] ivtv0: Stream decoder YUV: status 0x0000, 0% in use [ 273.134157] ivtv0: ================== END STATUS CARD #0 ================== options msp3400 debug=2 standard=0x04 [ 22.297040] ivtv: ==================== START INIT IVTV ==================== [ 22.297048] ivtv: version 0.10.0 (development snapshot compiled on Fri 26 Jan 2007 01:25:06 PM CET) loading [ 22.297052] ivtv: Linux version: 2.6.19.2-iskratel SMP mod_unload 586 REGPARM [ 22.297056] ivtv: In case of problems please include the debug info between [ 22.297060] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [ 22.297064] ivtv: any module options, when mailing the ivtv-users mailinglist. [ 22.298243] ivtv0: Autodetected Hauppauge card (cx23415 based) [ 22.298368] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 22.298389] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 23.034327] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) [ 23.104067] ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) [ 23.333377] ivtv0: Encoder revision: 0x02050032 [ 23.343377] ivtv0: Decoder revision: 0x02020023 [ 23.408218] tveeprom 0-0050: Hauppauge model 48139, rev K257, serial# 8260736 [ 23.408222] tveeprom 0-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38) [ 23.408226] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) [ 23.408229] tveeprom 0-0050: audio processor is MSP4418 (idx 25) [ 23.408231] tveeprom 0-0050: decoder processor is SAA7115 (idx 19) [ 23.408233] tveeprom 0-0050: has radio, has IR remote [ 23.408236] ivtv0: Autodetected Hauppauge WinTV PVR-350 [ 23.424836] tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) [ 23.424928] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) [ 23.429336] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 23.504245] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) [ 23.738159] saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) [ 23.762080] msp3400 0-0040: rev1=0x0217, rev2=0x1243 [ 23.762085] msp3400 0-0040: mute=off scanning=no volume=58880 [ 23.765450] msp3400 0-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0) [ 23.765452] msp3400 0-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and autoselect [ 23.765478] msp3400 0-0040: msp34xxg daemon started [ 23.765481] msp3400 0-0040: msp34xxg thread: sleep [ 23.766450] ivtv0: Registered device video2 for encoder MPEG (4 MB) [ 23.767872] ivtv0: Registered device video34 for encoder YUV (2 MB) [ 23.768133] ivtv0: Registered device vbi2 for encoder VBI (1 MB) [ 23.769423] ivtv0: Registered device video26 for encoder PCM audio (1 MB) [ 23.769736] ivtv0: Registered device radio2 for encoder radio [ 23.770586] ivtv0: Registered device video18 for decoder MPEG (1 MB) [ 23.771030] ivtv0: Registered device vbi10 for decoder VBI (1 MB) [ 23.771993] ivtv0: Registered device vbi18 for decoder VOUT [ 23.773165] ivtv0: Registered device video50 for decoder YUV (1 MB) [ 23.841882] ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) [ 23.951724] tuner 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [ 23.951732] msp3400 0-0040: v4l2_int ioctl TUNER_SET_TYPE_ADDR, dir=-w (0x4004645a) [ 23.951740] msp3400 0-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c) [ 23.951745] msp3400 0-0040: mute=on scanning=no volume=58880 [ 23.960779] msp3400 0-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d) [ 23.960784] msp3400 0-0040: scart switch: in1 => 0 (ACB=0x0000) [ 23.962470] msp3400 0-0040: scart switch: in1 da => 1 (ACB=0x0c00) [ 23.964156] msp3400 0-0040: scart switch: in1 da => 2 (ACB=0x0c00) [ 23.965845] msp3400 0-0040: set source to 0 (0x320) for output 08 [ 23.967531] msp3400 0-0040: set source to 0 (0x320) for output 0c [ 23.969221] msp3400 0-0040: set source to 0 (0x320) for output 09 [ 23.970912] msp3400 0-0040: set source to 0 (0x320) for output 0a [ 23.972601] msp3400 0-0040: set source to 0 (0x320) for output 41 [ 23.974286] msp3400 0-0040: set source to 0 (0x320) for output 0b [ 23.979527] msp3400 0-0040: msp34xxg thread: wakeup [ 23.979530] msp3400 0-0040: thread: restart scan [ 23.983703] msp3400 0-0040: selected M (BTSC) modus [ 23.985401] msp3400 0-0040: set source to 0 (0x320) for output 08 [ 23.987096] msp3400 0-0040: set source to 0 (0x320) for output 0c [ 23.988791] msp3400 0-0040: set source to 0 (0x320) for output 09 [ 23.990488] msp3400 0-0040: set source to 0 (0x320) for output 0a [ 23.992181] msp3400 0-0040: set source to 0 (0x320) for output 41 [ 23.993871] msp3400 0-0040: set source to 0 (0x320) for output 0b [ 24.003997] msp3400 0-0040: detected standard: 6.5/6.25 D/K1 Dual FM-Stereo (0x0004) [ 24.004000] msp3400 0-0040: mute=on scanning=no volume=58880 [ 24.010752] msp3400 0-0040: msp34xxg thread: sleep [ 24.089295] msp3400 0-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c) [ 24.089300] msp3400 0-0040: mute=off scanning=no volume=58880 [ 24.095774] msp3400 0-0040: v4l2_int ioctl TDA9887_SET_CONFIG, dir=-w (0x4004645c) [ 24.174906] msp3400 0-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618) [ 24.174914] msp3400 0-0040: msp34xxg thread: wakeup [ 24.174917] msp3400 0-0040: thread: restart scan [ 24.174994] msp3400 0-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c) [ 24.175000] msp3400 0-0040: mute=on scanning=no volume=58880 [ 24.179277] msp3400 0-0040: selected PAL modus [ 24.181037] msp3400 0-0040: set source to 0 (0x320) for output 08 [ 24.184497] msp3400 0-0040: set source to 0 (0x320) for output 0c [ 24.186299] msp3400 0-0040: set source to 0 (0x320) for output 09 [ 24.191367] msp3400 0-0040: set source to 0 (0x320) for output 0a [ 24.194474] msp3400 0-0040: set source to 0 (0x320) for output 41 [ 24.195890] msp3400 0-0040: v4l2_int ioctl TDA9887_SET_CONFIG, dir=-w (0x4004645c) [ 24.197577] msp3400 0-0040: set source to 0 (0x320) for output 0b [ 24.198989] msp3400 0-0040: v4l2 ioctl VIDIOC_S_FREQUENCY, dir=-w (0x402c5639) [ 24.209142] msp3400 0-0040: detected standard: 6.5/6.25 D/K1 Dual FM-Stereo (0x0004) [ 24.209145] msp3400 0-0040: mute=on scanning=no volume=58880 [ 24.215889] msp3400 0-0040: msp34xxg thread: sleep [ 24.308698] msp3400 0-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c) [ 24.308703] msp3400 0-0040: mute=off scanning=no volume=58880 [ 24.313752] ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 [ 24.313815] ivtv: ====================== NEXT CARD ====================== [ 192.612478] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 192.612499] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 192.612667] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 192.612867] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 192.613107] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 192.613225] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 192.620299] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 192.620320] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 192.620518] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 192.620777] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 192.620883] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 192.621042] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 192.650975] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 192.652870] msp3400 0-0040: status=0x6, stereo=0, bilingual=0 -> rxsubchans=1 [ 192.652887] msp3400 0-0040: v4l2 ioctl VIDIOC_G_FREQUENCY, dir=rw (0xc02c5638) [ 192.654596] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 192.656490] msp3400 0-0040: status=0x6, stereo=0, bilingual=0 -> rxsubchans=1 [ 192.995467] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 192.995856] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 192.996024] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 192.996230] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 192.996451] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 192.996707] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 192.997484] msp3400 0-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c) [ 193.006147] msp3400 0-0040: v4l2_int ioctl VIDIOC_INT_AUDIO_CLOCK_FREQ, dir=-w (0x40046467) [ 193.309022] msp3400 0-0040: v4l2_int ioctl TDA9887_SET_CONFIG, dir=-w (0x4004645c) [ 193.388198] msp3400 0-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618) [ 193.388219] msp3400 0-0040: msp34xxg thread: wakeup [ 193.388223] msp3400 0-0040: thread: restart scan [ 193.392447] msp3400 0-0040: selected SECAM modus [ 193.394703] msp3400 0-0040: set source to 0 (0x320) for output 08 [ 193.395826] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 193.397537] msp3400 0-0040: set source to 0 (0x320) for output 0c [ 193.399420] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 193.399678] msp3400 0-0040: v4l2 ioctl VIDIOC_G_FREQUENCY, dir=rw (0xc02c5638) [ 193.399927] msp3400 0-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c) [ 193.399934] msp3400 0-0040: mute=on scanning=no volume=58880 [ 193.401153] msp3400 0-0040: set source to 0 (0x320) for output 09 [ 193.404594] msp3400 0-0040: set source to 0 (0x320) for output 0a [ 193.406388] msp3400 0-0040: set source to 0 (0x320) for output 41 [ 193.409789] msp3400 0-0040: set source to 0 (0x320) for output 0b [ 193.421660] msp3400 0-0040: detected standard: 6.5/6.25 D/K1 Dual FM-Stereo (0x0004) [ 193.421669] msp3400 0-0040: mute=on scanning=no volume=58880 [ 193.429849] msp3400 0-0040: msp34xxg thread: sleep [ 193.431276] msp3400 0-0040: v4l2_int ioctl TDA9887_SET_CONFIG, dir=-w (0x4004645c) [ 193.432707] msp3400 0-0040: v4l2 ioctl VIDIOC_S_FREQUENCY, dir=-w (0x402c5639) [ 193.432728] msp3400 0-0040: msp34xxg thread: wakeup [ 193.432731] msp3400 0-0040: thread: restart scan [ 193.436959] msp3400 0-0040: selected SECAM modus [ 193.438663] msp3400 0-0040: set source to 0 (0x320) for output 08 [ 193.440390] msp3400 0-0040: set source to 0 (0x320) for output 0c [ 193.442094] msp3400 0-0040: set source to 0 (0x320) for output 09 [ 193.443794] msp3400 0-0040: set source to 0 (0x320) for output 0a [ 193.445493] msp3400 0-0040: set source to 0 (0x320) for output 41 [ 193.447197] msp3400 0-0040: set source to 0 (0x320) for output 0b [ 193.457351] msp3400 0-0040: detected standard: 6.5/6.25 D/K1 Dual FM-Stereo (0x0004) [ 193.457358] msp3400 0-0040: mute=on scanning=no volume=58880 [ 193.464151] msp3400 0-0040: msp34xxg thread: sleep [ 193.543129] msp3400 0-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c) [ 193.543137] msp3400 0-0040: mute=off scanning=no volume=58880 [ 193.548237] msp3400 0-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c) [ 193.548246] msp3400 0-0040: mute=off scanning=no volume=60535 [ 194.590994] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 194.592969] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 195.626880] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 195.628801] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 196.627271] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 196.629186] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 197.662607] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 197.664525] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 198.097751] ip_tables: (C) 2000-2006 Netfilter Core Team [ 198.662027] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 198.663936] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 199.698713] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 199.700615] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 200.747392] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 200.749296] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 201.772562] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 201.774560] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 202.808744] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 202.810666] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 203.810411] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 203.812356] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 204.845269] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 204.847173] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 204.903462] NET: Registered protocol family 17 [ 205.843406] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 205.845406] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 206.879065] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 206.880989] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 207.928120] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 207.930029] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 208.954420] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 208.956336] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 209.989889] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 209.991801] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 210.990848] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 210.992756] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 212.026513] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 212.028432] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 213.027816] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 213.029725] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 214.060305] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 214.062236] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 215.110590] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 215.112489] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 216.136156] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 216.138067] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 217.171771] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 217.173676] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 218.172330] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 218.174248] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 219.207070] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 219.209001] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 220.207655] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 220.209590] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 221.241744] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 221.243662] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 222.291992] msp3400 0-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d) [ 222.293896] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 222.818953] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 222.818975] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 222.818989] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 222.819010] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 222.819025] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 222.819039] msp3400 0-0040: v4l2 ioctl VIDIOC_QUERYCTRL, dir=rw (0xc0445624) [ 222.819569] ivtv0: ================= START STATUS CARD #0 ================= [ 222.876302] tveeprom 0-0050: Hauppauge model 48139, rev K257, serial# 8260736 [ 222.876309] tveeprom 0-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38) [ 222.876316] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) [ 222.876321] tveeprom 0-0050: audio processor is MSP4418 (idx 25) [ 222.876325] tveeprom 0-0050: decoder processor is SAA7115 (idx 19) [ 222.876328] tveeprom 0-0050: has radio, has IR remote [ 222.876339] tda9887 0-0043: Data bytes: b=0x14 c=0x6e e=0x4b [ 222.876350] tuner 0-0061: Tuner mode: analog TV [ 222.876354] tuner 0-0061: Frequency: 199.25 MHz [ 222.876359] tuner 0-0061: Standard: 0x00320000 [ 222.876365] saa7115 0-0021: Audio frequency: 48000 Hz [ 222.878727] saa7115 0-0021: Input: Composite 4 [ 222.878733] saa7115 0-0021: Video signal: broadcast/DVD [ 222.878736] saa7115 0-0021: Frequency: 50 Hz [ 222.878739] saa7115 0-0021: Detected format: SECAM [ 222.878742] saa7115 0-0021: Width, Height: 720, 576 [ 222.879083] saa7127 0-0044: Standard: 50 Hz [ 222.879088] saa7127 0-0044: Input: normal [ 222.879091] saa7127 0-0044: Output: S-Video + Composite [ 222.879094] saa7127 0-0044: WSS: disabled [ 222.879097] saa7127 0-0044: VPS: disabled [ 222.879101] saa7127 0-0044: CC: disabled [ 222.879989] msp3400 0-0040: v4l2 ioctl VIDIOC_LOG_STATUS, dir=-- (0x00005646) [ 222.882045] msp3400 0-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1 [ 222.882050] msp3400 0-0040: MSP4418G-B3 rev1 = 0x0217 rev2 = 0x1243 [ 222.882056] msp3400 0-0040: Audio: volume 60535 [ 222.882060] msp3400 0-0040: Standard: 6.5/6.25 D/K1 Dual FM-Stereo (mono) [ 222.882066] msp3400 0-0040: Audmode: 0x0001 [ 222.882070] msp3400 0-0040: Routing: 0x00000000 (input) 0x00000044 (output) [ 222.882076] msp3400 0-0040: ACB: 0x0c00 [ 222.882082] ivtv0: Video Input: Tuner 1 [ 222.882086] ivtv0: Audio Input: Tuner 1 [ 222.882091] ivtv0: Video Output: S-Video + Composite [ 222.882095] ivtv0: Audio Output: A/V Audio Out [ 222.882099] ivtv0: Output Mode: None [ 222.882104] ivtv0: Tuner: TV [ 222.882108] ivtv0: Stream: MPEG-2 Program Stream [ 222.882113] ivtv0: VBI Format: No VBI [ 222.882118] ivtv0: Video: 720x576, 25 fps [ 222.882123] ivtv0: Video: MPEG-2, 4x3, Variable Bitrate, 4500000, Peak 5500000 [ 222.882131] ivtv0: Video: GOP Size 12, 2 B-Frames, GOP Closure, No 3:2 Pulldown [ 222.882137] ivtv0: Audio: 48 kHz, Layer II, 224 kbps, Stereo, No Emphasis, No CRC [ 222.882146] ivtv0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D Horizontal, 0 [ 222.882156] ivtv0: Temporal Filter: Manual, 8 [ 222.882164] ivtv0: Median Filter: Off, Luma [0, 255], Chroma [0, 255] [ 222.882173] ivtv0: Status flags: 0x00000040 [ 222.882181] ivtv0: Stream encoder MPEG: status 0x0118, 0% in use [ 222.882187] ivtv0: Stream encoder YUV: status 0x0000, 0% in use [ 222.882192] ivtv0: Stream encoder VBI: status 0x0000, 0% in use [ 222.882197] ivtv0: Stream encoder PCM audio: status 0x0000, 0% in use [ 222.882203] ivtv0: Stream decoder MPEG: status 0x0000, 0% in use [ 222.882208] ivtv0: Stream decoder VBI: status 0x0000, 0% in use [ 222.882213] ivtv0: Stream decoder YUV: status 0x0000, 0% in use [ 222.882218] ivtv0: ================== END STATUS CARD #0 ================== _______________________________________________ ivtv-devel mailing list ivtv-devel@ivtvdriver.org http://ivtvdriver.org/mailman/listinfo/ivtv-devel
