I have a box with two pvr500s in it. I've noticed over the last month or so that occasionally mythtv would record programs without sound. I wasn't sure if this was a myth problem or ivtv, but last night I was able to see it fail using "mplayer /dev/video0". The other 3 tuners were operating successfully. I then did "rmmod ivtv" and "modprobe ivtv" and all 4 tuners were working correctly. And after several recordings last night (tuners unknown) /dev/video0 still has sound this morning. I have the latest ivtv from atrpms:
ivtv-0.10.1-126.fc6.at.i386 ivtv-firmware-20070217-13.at.noarch ivtv-kmdl-2.6.20-1.2925.fc6-0.10.1-126.fc6.at.i686 The initialisation of this tuner looks like this: Mar 21 20:04:06 sheedy kernel: ivtv: ==================== START INIT IVTV ==================== Mar 21 20:04:06 sheedy kernel: ivtv: version 0.10.1 (tagged release) loading Mar 21 20:04:06 sheedy kernel: ivtv: Linux version: 2.6.20-1.2925.fc6 SMP mod_unload 686 4KSTACKS Mar 21 20:04:06 sheedy kernel: ivtv: In case of problems please include the debug info between Mar 21 20:04:06 sheedy kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with Mar 21 20:04:06 sheedy kernel: ivtv: any module options, when mailing the ivtv-users mailinglist. Mar 21 20:04:06 sheedy kernel: ivtv0: Autodetected Hauppauge card (cx23416 based) Mar 21 20:04:06 sheedy kernel: ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNK4] -> GSI 11 (level, low) -> IRQ 11 Mar 21 20:04:07 sheedy kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) Mar 21 20:04:07 sheedy kernel: ivtv0: Encoder revision: 0x02060039 Mar 21 20:04:07 sheedy kernel: tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0) Mar 21 20:04:07 sheedy kernel: tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) Mar 21 20:04:07 sheedy kernel: tuner 2-0060: TEA5767 detected. Mar 21 20:04:07 sheedy kernel: tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #0) Mar 21 20:04:07 sheedy kernel: tuner 2-0060: type set to 62 (Philips TEA5767HN FM Radio) Mar 21 20:04:07 sheedy kernel: tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) Mar 21 20:04:07 sheedy kernel: cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) Mar 21 20:04:12 sheedy kernel: cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) Mar 21 20:04:12 sheedy kernel: wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) Mar 21 20:04:12 sheedy kernel: tveeprom 2-0050: Hauppauge model 23559, rev D591, serial# 7914273 Mar 21 20:04:12 sheedy kernel: tveeprom 2-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) Mar 21 20:04:12 sheedy kernel: tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) Mar 21 20:04:12 sheedy kernel: tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) Mar 21 20:04:12 sheedy kernel: tveeprom 2-0050: audio processor is CX25843 (idx 37) Mar 21 20:04:12 sheedy kernel: tveeprom 2-0050: decoder processor is CX25843 (idx 30) Mar 21 20:04:12 sheedy kernel: tveeprom 2-0050: has radio, has no IR receiver, has no IR transmitter Mar 21 20:04:12 sheedy kernel: ivtv0: Autodetected WinTV PVR 500 (unit #1) Mar 21 20:04:12 sheedy kernel: ivtv0: Registered device video0 for encoder MPEG (4 MB) Mar 21 20:04:12 sheedy kernel: ivtv0: Registered device video32 for encoder YUV (2 MB) Mar 21 20:04:12 sheedy kernel: ivtv0: Registered device vbi0 for encoder VBI (1 MB) Mar 21 20:04:12 sheedy kernel: ivtv0: Registered device video24 for encoder PCM audio (1 MB) Mar 21 20:04:12 sheedy kernel: ivtv0: Registered device radio0 for encoder radio Mar 21 20:04:12 sheedy kernel: tuner 2-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) Mar 21 20:04:13 sheedy kernel: ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 And /etc/modprobe.conf contains alias char-major-81 ivtv- alias char-major-81-0 ivtv alias char-major-81-1 ivtv I also see messages like this from time to time, though I don't know if they're relevant: Mar 21 20:58:02 sheedy kernel: ivtv1 warning: CX2341X_ENC_SET_VBI_LINE took 193 jiffies (1000 per HZ) Mar 21 21:58:02 sheedy kernel: ivtv0 warning: CX2341X_ENC_MISC took 175 jiffies (1000 per HZ) and much less often: Mar 19 23:23:36 sheedy kernel: ivtv0: All encoder VBI stream buffers are full. Dropping data. Mar 19 23:23:36 sheedy kernel: ivtv0: Cause: the application is not reading fast enough. Do I need some extra configuration, or is this a bug. If the latter, do you need more info? Regards, Chris _______________________________________________ ivtv-devel mailing list ivtv-devel@ivtvdriver.org http://ivtvdriver.org/mailman/listinfo/ivtv-devel
