thank you nick,
this was the answer to the problem :)
---
a.angerer log, stardate: 20.04.2005 15:37
following transmission from >> Nick Rosier <<
> try adding tda9887=0 to your ivtv module options
>
> N.
>
> On 4/20/05, Andreas Angerer <[EMAIL PROTECTED]> wrote:
>> Hi @ ivtv-devel,
>>
>> I had mythtv and ivtv working for quite some time on my PVR 250, 2.6.8
>> kernel and 0.2.0 (rc3i) on Fedora Core 2. No complaints. I installed a
>> tuner type 38 PVR 350 recently and have been trying to get them both
>> running in the same machine. I have no Problems watching TV and changing
>> channels on the PVR 250, but the PVR 350 won't work with the tuner, the
>> Composite Input seems to work (the Picture gets black when i change the
>> input with ptune-ui)
>> I also tried to move the cards through various PCI slots, tried to set
>> tuner direct via options in modprobe.conf, no change.
>>
>> Have i missed something?
>>
>> Regards
>> Andreas
>>
>> Here's /etc/modprobe.conf:
>> alias char-major-61 lirc_i2c
>> alias eth0 sis900
>> alias usb-controller ehci-hcd
>> alias usb-controller1 ohci-hcd
>> install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 &&
>> /usr/sbin/alsactl restore >/dev/null 2>&1 || :
>> remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; };
>> /sbin/modprobe -r --ignore-remove snd-intel8x0
>> alias snd-card-0 snd-intel8x0
>> # ivtv kernel modules
>> alias char-major-81 videodev
>> alias char-major-81-0 ivtv
>> alias char-major-81-1 ivtv
>> alias msp3400 msp3400-ivtv
>> install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-install
>> lirc_i2c
>> # nvidia kernel module
>> alias char-major-195 nvidia-1_0-7174
>> alias nvidia nvidia-1_0-7174
>>
>> IVTV Output:
>> ivtv: ==================== START INIT IVTV ====================
>> ivtv: version 0.2.0 (rc3i) loading
>> ivtv: Linux version: 2.6.10-1.771_FC2 686 REGPARM 4KSTACKS gcc-3.3
>> ivtv: In case of problems please include the debug info
>> ivtv: between the START INIT IVTV and END INIT IVTV lines when
>> ivtv: mailing the ivtv-devel mailinglist.
>> ivtv: Autodetected WinTV PVR 350 card
>> ivtv: Found an iTVC15 based chip
>> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>> PCI: setting IRQ 11 as level-triggered
>> ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 11 (level, low) -> IRQ 11
>> ivtv: XXX PCI device: 0x0661 vendor: 0x1039
>> ivtv: i2c attach [client=tveeprom,ok]
>> tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7671464
>> tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38)
>> tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
>> tveeprom: audio_processor = CS5331 (type = 9)
>> ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model
>> 0x00ad2557, Revision 0xe0a85304
>> ivtv: Radio detected
>> ivtv: i2c attach [client=(tuner unset),ok]
>> tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
>> saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
>> saa7115: detecting saa7115 client on address 0x42
>> saa7115: writing init values
>> ivtv: i2c attach [client=saa7115[0],ok]
>> saa7115: status: (1E) 0x40, (1F) 0xc0
>> saa7127: Ignoring new-style parameters in presence of obsolete ones
>> saa7127: video encoder driver version V 0.3 loaded
>> saa7127: detecting saa7127 client on address 0x88
>> saa7127: Selecting NTSC video Standard
>> saa7127: Selecting S-Video+Composite
>> saa7127: Turn WSS off
>> saa7127: Widescreen Mode 4:3 Full Format
>> saa7127: Selecting Normal Encoder Input
>> saa7127: Enable Video Output
>> ivtv: i2c attach [client=saa7127[0],ok]
>> msp34xx: ivtv version
>> msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode,
>> simpler (G) no-thread mode
>> msp34xx: $Id$ compiled on: Apr 3 2005 19:27:44
>> ivtv: i2c attach [client=MSP3418W-B3,ok]
>> bttv: driver version 0.9.15 loaded
>> bttv: snapshot date 2005-03-10
>> bttv: using 8 buffers with 2080k (520 pages) each for capture
>> ivtv: Encoder revision: 0x02040024
>> ivtv: Encoder Firmware may be buggy, use version 0x02040011
>> ivtv: Decoder revision: 0x02020023
>> ivtv: Configuring WinTV PVR 350 card with 9 streams
>> ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes
>> total
>> ivtv: Registered v4l2 device, streamtype 0 minor 0
>> ivtv: Create DMA stream 1
>> ivtv: Registered v4l2 device, streamtype 1 minor 32
>> ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
>> ivtv: Registered v4l2 device, streamtype 2 minor 224
>> ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
>> ivtv: Registered v4l2 device, streamtype 3 minor 24
>> ivtv: Create stream 4
>> ivtv: Registered v4l2 device, streamtype 4 minor 64
>> ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total
>> ivtv: Registered v4l2 device, streamtype 5 minor 16
>> ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total
>> ivtv: Registered v4l2 device, streamtype 6 minor 228
>> ivtv: Create stream 7
>> ivtv: Registered v4l2 device, streamtype 7 minor 232
>> ivtv: Create DMA stream 8
>> ivtv: Registered v4l2 device, streamtype 8 minor 48
>> ivtv: Setting Tuner 38
>> tuner 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
>> saa7115: decoder set input (4)
>> saa7115: now setting Composite input
>> ivtv: Setting audio matrix to input 3, output 1
>> ivtv: Switching standard to PAL.
>> ivtv: ivtv_enc_thread: pid = 2709, itv = 0xe0a7a120
>> ivtv: ivtv_dec_thread: pid = 2710, itv = 0xe0a7a120
>> saa7115: decoder set norm PAL
>> saa7115: set audio: 0x01
>> saa7127: Setting Encoder Video Standard
>> saa7127: Set PAL Video Mode
>> saa7127: Selecting PAL video Standard
>> ivtv: Initialized WinTV PVR 350, card #0
>> ivtv: Autodetected WinTV PVR 250 card
>> ivtv: Found an iTVC16 based chip
>> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
>> ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 5 (level, low) -> IRQ 5
>> ivtv: XXX PCI device: 0x0661 vendor: 0x1039
>> ivtv: i2c attach [client=tveeprom,ok]
>> ivtv: i2c attach [client=(tuner unset),ok]
>> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1)
>> saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005)
>> saa7115: detecting saa7115 client on address 0x42
>> saa7115: writing init values
>> ivtv: i2c attach [client=saa7115[1],ok]
>> saa7115: status: (1E) 0x48, (1F) 0xc0
>> msp34xx: ivtv version
>> msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode,
>> simpler (G) no-thread mode
>> msp34xx: $Id$ compiled on: Apr 3 2005 19:27:44
>> ivtv: i2c attach [client=MSP3418W-A2,ok]
>> tveeprom: Hauppauge: model = 32054, rev = B148, serial# = 2766638
>> tveeprom: tuner = LG TP18PSB11D (idx = 48, type = 29)
>> tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
>> tveeprom: audio_processor = CS5331 (type = 9)
>> ivtv: Tuner Type 29, Tuner formats 0x00000007, Radio: yes, Model
>> 0x00891518, Revision 0xe0a997a4
>> ivtv: Radio detected
>> ivtv: Encoder revision: 0x02040024
>> ivtv: Encoder Firmware may be buggy, use version 0x02040011
>> ivtv: Configuring WinTV PVR 250 card with 5 streams
>> ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes
>> total
>> ivtv: Registered v4l2 device, streamtype 0 minor 1
>> ivtv: Create DMA stream 1
>> ivtv: Registered v4l2 device, streamtype 1 minor 33
>> ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
>> ivtv: Registered v4l2 device, streamtype 2 minor 225
>> ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
>> ivtv: Registered v4l2 device, streamtype 3 minor 25
>> ivtv: Create stream 4
>> ivtv: Registered v4l2 device, streamtype 4 minor 65
>> ivtv: Setting Tuner 29
>> tuner 1-0061: type set to 29 (LG PAL_BG (TPI8PSB11D))
>> saa7115: decoder set input (4)
>> saa7115: now setting Composite input
>> ivtv: Setting audio matrix to input 3, output 1
>> ivtv: Switching standard to PAL.
>> ivtv: ivtv_enc_thread: pid = 2761, itv = 0xe0a8e5c0
>> saa7115: decoder set norm PAL
>> saa7115: set audio: 0x01
>> ivtv: Initialized WinTV PVR 250, card #1
>> ivtv: ==================== END INIT IVTV ====================
>>
>> -------------------------------------------------------
>> This SF.Net email is sponsored by: New Crystal Reports XI.
>> Version 11 adds new functionality designed to reduce time involved in
>> creating, integrating, and deploying reporting solutions. Free runtime info,
>> new features, or free trial, at: http://www.businessobjects.com/devxi/728
>> _______________________________________________
>> ivtv-devel mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/ivtv-devel
>>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: New Crystal Reports XI.
> Version 11 adds new functionality designed to reduce time involved in
> creating, integrating, and deploying reporting solutions. Free runtime info,
> new features, or free trial, at: http://www.businessobjects.com/devxi/728
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/ivtv-devel
-------------------------------------------------------
This SF.Net email is sponsored by: New Crystal Reports XI.
Version 11 adds new functionality designed to reduce time involved in
creating, integrating, and deploying reporting solutions. Free runtime info,
new features, or free trial, at: http://www.businessobjects.com/devxi/728
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
