Hi,
I've been trying to get the radio working on my new 500mce, but I'm not
getting any sound.
I'm trying to do the ./radio -s (or -a for that matter) in order to scan
for any channels, it doesn't seem to pick up anything. It scans, but
eventually exits with no output. I also tried ./radio -f 96.1 (a channel
I know exists) but it doesn't work either.
I'm certain there's a signal on the cable - I tested it with a normal FM
tuner and it gets all the channels.
All modules are from 0.3.7 - no leftovers from the kernel (I checked this)
Running Gentoo - using ivtv 0.3.7 with firmware prerelease 2.0.34.23172
- module options and log at the bottom of this mail.
If anyone has the radio working, then please tell me about your
configuration, version and fw.
If you need more debugging info, please tell me what you need.
Thanks,
/Miwer
Heres a snip from the syslog when running the radio util:
(./radio -f 96.1)
Jul 19 23:21:19 myth ivtv: Allocate encoder radio stream
Jul 19 23:21:20 myth cx25840: decoder disable output
Jul 19 23:21:20 myth cx25840: set audio input (4)
Jul 19 23:21:20 myth cx25840: decoder enable output
Jul 19 23:21:20 myth cx25840: decoder set norm PAL
Jul 19 23:21:20 myth cx25840: decoder set input (6)
Jul 19 23:21:20 myth cx25840: now setting Tuner input
Jul 19 23:21:20 myth cx25840: set audio input (4)
Jul 19 23:21:20 myth cx25840: decoder disable output
Jul 19 23:21:20 myth cx25840: decoder enable output
Jul 19 23:21:20 myth cx25840: decoder set norm PAL
Jul 19 23:21:20 myth cx25840: decoder set input (6)
Jul 19 23:21:20 myth cx25840: now setting Tuner input
Jul 19 23:21:20 myth cx25840: set audio input (4)
Jul 19 23:21:20 myth ivtv: Allocate DMA encoder PCM audio stream: 455 x
4608 buffers (2048KB total)
Jul 19 23:21:20 myth ivtv: Setup VBI API header 0x0000bd0d pkts 1 buffs
4 ln 36 sz 1444
Jul 19 23:21:20 myth ivtv: Setup VBI start 0x002fea04 frames 4 fpi 1
lines 0x00000140
Jul 19 23:21:21 myth cx25840: decoder disable output
Jul 19 23:21:21 myth cx25840: decoder enable output
Jul 19 23:21:21 myth cx25840: decoder set norm PAL
Jul 19 23:21:21 myth cx25840: decoder set input (6)
Jul 19 23:21:21 myth cx25840: now setting Tuner input
Jul 19 23:21:21 myth cx25840: set audio input (4)
(CTRL-C to exit the radio util)
Jul 19 23:21:32 myth cx25840: decoder disable output
Jul 19 23:21:32 myth tuner: TV freq (0.00) out of range (44-958)
Jul 19 23:21:32 myth cx25840: set audio input (0)
Jul 19 23:21:32 myth cx25840: decoder enable output
Jul 19 23:21:32 myth cx25840: decoder set norm PAL
Jul 19 23:21:32 myth cx25840: decoder set input (6)
Jul 19 23:21:32 myth cx25840: now setting Tuner input
Jul 19 23:21:32 myth cx25840: set audio input (0)
My modules.conf settings:
$ cat /etc/modules.d/ivtv
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
options cx25840 cx25840_fw="/lib/modules/HcwMakoC.ROM"
syslog when loading ivtv:
$ modprobe ivtv
Jul 19 23:10:52 myth ivtv: ==================== START INIT IVTV
====================
Jul 19 23:10:52 myth ivtv: version 0.3.7 () loading
Jul 19 23:10:52 myth ivtv: Linux version: 2.6.11-gentoo-r11 PENTIUM4 gcc-3.3
Jul 19 23:10:52 myth ivtv: In case of problems please include the debug info
Jul 19 23:10:52 myth ivtv: between the START INIT IVTV and END INIT IVTV
lines when
Jul 19 23:10:52 myth ivtv: mailing the ivtv-devel mailinglist.
Jul 19 23:10:52 myth ivtv: Autodetected WinTV PVR 150 card
Jul 19 23:10:52 myth ivtv: Found an iTVC16 based chip
Jul 19 23:10:52 myth ACPI: PCI interrupt 0000:03:08.0[A] -> GSI 18
(level, low) -> IRQ 18
Jul 19 23:10:52 myth ivtv: XXX PCI device: 0x2560 vendor: 0x8086
Jul 19 23:10:52 myth tveeprom: Hauppauge: model = 23559, rev = D591,
serial# = 2990431
Jul 19 23:10:52 myth tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91,
type = 56)
Jul 19 23:10:52 myth tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L)
PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
Jul 19 23:10:52 myth tveeprom: audio_processor = MSP3410D (type = 5)
Jul 19 23:10:52 myth ivtv: i2c attach [client=tveeprom[50],ok]
Jul 19 23:10:52 myth ivtv: Tuner Type 56, Tuner formats 0x00400e17,
Radio: yes, Model 0x00915651, Revision 0x00000000
Jul 19 23:10:52 myth ivtv: PAL tuner detected
Jul 19 23:10:52 myth ivtv: Radio detected
Jul 19 23:10:52 myth tuner: Ignoring new-style parameters in presence of
obsolete ones
Jul 19 23:10:52 myth tuner: chip found at addr 0xc2 i2c-bus ivtv i2c
driver #0
Jul 19 23:10:52 myth ivtv: i2c attach [client=(tuner unset),ok]
Jul 19 23:10:52 myth cx25840: starting probe on adapter ivtv i2c driver
#0 (0x10005)
Jul 19 23:10:52 myth cx25840: detecting cx25840 client on address 0x88
Jul 19 23:10:52 myth cx25840: cx25843-23 found. Initializing...
Jul 19 23:10:52 myth cx25840: requesting /lib/modules/HcwMakoC.ROM
Jul 19 23:10:53 myth cx25840: firmware loaded
Jul 19 23:10:53 myth ivtv: i2c attach [client=cx25840[50],ok]
Jul 19 23:10:53 myth ivtv: i2c attach [client=wm8775[50],ok]
Jul 19 23:10:53 myth tda9885/6/7: chip found @ 0x86
Jul 19 23:10:53 myth ivtv: i2c attach [client=tda9887,ok]
Jul 19 23:10:54 myth ivtv: Encoder revision: 0x02050032
Jul 19 23:10:54 myth ivtv: Encoder Firmware may be buggy, use version
0x02040011
Jul 19 23:10:54 myth ivtv: Configuring WinTV PVR 150 card with 5 streams
Jul 19 23:10:54 myth ivtv: Registered v4l2 device for encoder MPEG minor 0
Jul 19 23:10:54 myth ivtv: Create DMA encoder MPEG stream: 0 x 32768
buffers (0KB total)
Jul 19 23:10:54 myth ivtv: Registered v4l2 device for encoder YUV minor 32
Jul 19 23:10:54 myth ivtv: Create DMA encoder YUV stream: 0 x 12960
buffers (0KB total)
Jul 19 23:10:54 myth ivtv: Registered v4l2 device for encoder VBI minor 224
Jul 19 23:10:54 myth ivtv: Create DMA encoder VBI stream: 0 x 12740
buffers (0KB total)
Jul 19 23:10:54 myth ivtv: Registered v4l2 device for encoder PCM audio
minor 24
Jul 19 23:10:54 myth ivtv: Create DMA encoder PCM audio stream: 0 x 4608
buffers (0KB total)
Jul 19 23:10:54 myth ivtv: Registered v4l2 device for encoder radio minor 64
Jul 19 23:10:54 myth ivtv: Create encoder radio stream
Jul 19 23:10:54 myth ivtv: Setting Tuner 56
Jul 19 23:10:54 myth tuner: type set to 56 (Philips PAL/SECAM multi
(FQ1216AME MK4)) by ivtv i2c driver #0
Jul 19 23:10:54 myth cx25840: decoder set norm PAL
Jul 19 23:10:54 myth cx25840: decoder set input (6)
Jul 19 23:10:54 myth cx25840: now setting Tuner input
Jul 19 23:10:54 myth cx25840: set audio input (0)
Jul 19 23:10:54 myth ivtv: Switching standard to PAL.
Jul 19 23:10:54 myth cx25840: decoder set norm PAL
Jul 19 23:10:54 myth ivtv: Initialized WinTV PVR 150, card #0
Jul 19 23:10:54 myth ivtv: Autodetected WinTV PVR 150 card
Jul 19 23:10:54 myth ivtv: Found an iTVC16 based chip
Jul 19 23:10:54 myth ivtv: ivtv_enc_thread: pid = 17176, itv = 0xd111b220
Jul 19 23:10:54 myth ivtv: ivtv_enc_vbi_thread: pid = 17177, itv =
0xd111b220
Jul 19 23:10:54 myth ACPI: PCI interrupt 0000:03:09.0[A] -> GSI 19
(level, low) -> IRQ 19
Jul 19 23:10:54 myth ivtv: XXX PCI device: 0x2560 vendor: 0x8086
Jul 19 23:10:55 myth tveeprom: Hauppauge: model = 23559, rev = D591,
serial# = 2990431
Jul 19 23:10:55 myth tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91,
type = 56)
Jul 19 23:10:55 myth tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L)
PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
Jul 19 23:10:55 myth tveeprom: audio_processor = MSP3410D (type = 5)
Jul 19 23:10:55 myth ivtv: i2c attach [client=tveeprom[50],ok]
Jul 19 23:10:55 myth tuner: chip found at addr 0xc2 i2c-bus ivtv i2c
driver #1
Jul 19 23:10:55 myth ivtv: i2c attach [client=(tuner unset),ok]
Jul 19 23:10:55 myth cx25840: starting probe on adapter ivtv i2c driver
#1 (0x10005)
Jul 19 23:10:55 myth cx25840: detecting cx25840 client on address 0x88
Jul 19 23:10:55 myth cx25840: cx25843-23 found. Initializing...
Jul 19 23:10:55 myth cx25840: requesting /lib/modules/HcwMakoC.ROM
Jul 19 23:10:56 myth cx25840: firmware loaded
Jul 19 23:10:56 myth ivtv: i2c attach [client=cx25840[50],ok]
Jul 19 23:10:56 myth ivtv: i2c attach [client=wm8775[50],ok]
Jul 19 23:10:56 myth tda9885/6/7: chip found @ 0x86
Jul 19 23:10:56 myth ivtv: i2c attach [client=tda9887,ok]
Jul 19 23:10:56 myth ivtv: Tuner Type 56, Tuner formats 0x00400e17,
Radio: yes, Model 0x00915651, Revision 0x00000000
Jul 19 23:10:56 myth ivtv: Radio detected
Jul 19 23:10:57 myth ivtv: Encoder revision: 0x02050032
Jul 19 23:10:57 myth ivtv: Encoder Firmware may be buggy, use version
0x02040011
Jul 19 23:10:57 myth ivtv: Configuring WinTV PVR 150 card with 5 streams
Jul 19 23:10:57 myth ivtv: Registered v4l2 device for encoder MPEG minor 1
Jul 19 23:10:57 myth ivtv: Create DMA encoder MPEG stream: 0 x 32768
buffers (0KB total)
Jul 19 23:10:57 myth ivtv: Registered v4l2 device for encoder YUV minor 33
Jul 19 23:10:57 myth ivtv: Create DMA encoder YUV stream: 0 x 12960
buffers (0KB total)
Jul 19 23:10:57 myth ivtv: Registered v4l2 device for encoder VBI minor 225
Jul 19 23:10:57 myth ivtv: Create DMA encoder VBI stream: 0 x 12740
buffers (0KB total)
Jul 19 23:10:57 myth ivtv: Registered v4l2 device for encoder PCM audio
minor 25
Jul 19 23:10:57 myth ivtv: Create DMA encoder PCM audio stream: 0 x 4608
buffers (0KB total)
Jul 19 23:10:57 myth ivtv: Registered v4l2 device for encoder radio minor 65
Jul 19 23:10:57 myth ivtv: Create encoder radio stream
Jul 19 23:10:57 myth ivtv: Setting Tuner 56
Jul 19 23:10:57 myth tuner: type set to 56 (Philips PAL/SECAM multi
(FQ1216AME MK4)) by ivtv i2c driver #1
Jul 19 23:10:57 myth cx25840: decoder set norm PAL
Jul 19 23:10:57 myth cx25840: decoder set input (6)
Jul 19 23:10:57 myth cx25840: now setting Tuner input
Jul 19 23:10:57 myth cx25840: set audio input (0)
Jul 19 23:10:57 myth ivtv: Switching standard to PAL.
Jul 19 23:10:57 myth cx25840: decoder set norm PAL
Jul 19 23:10:57 myth ivtv: Initialized WinTV PVR 150, card #1
Jul 19 23:10:57 myth ivtv: ==================== END INIT IVTV
====================
Jul 19 23:10:57 myth ivtv: ivtv_enc_thread: pid = 17308, itv = 0xd113e554
Jul 19 23:10:57 myth ivtv: ivtv_enc_vbi_thread: pid = 17309, itv =
0xd113e554
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
