try removing:
options cx25840 i2c_enable=-1,1
Steve Nuffer wrote:
I changed the modprobe.conf to the following with the same results.
** modprobe.conf **
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
options saa7127 enable_output=1 i2c_enable=1,-1
options ivtv ivtv_debug=1 ivtv_std=1
options cx25840 i2c_enable=-1,1
install ivtv /sbin/modprobe --ignore-install ivtv; /sbin/modprobe ivtv-fb
** dmesg | grep ivtv ** ( the output was too large for the list )
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.6 (w) loading
ivtv: Linux version: 2.6.11-1.35_FC3 686 REGPARM 4KSTACKS gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
ivtv: i2c attach [client=tveeprom[50],ok]
msp34xx: ivtv version
ivtv: i2c attach [client=MSP3448W-A2,ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
ivtv: i2c attach [client=saa7115[50],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
ivtv: i2c attach [client=saa7127[50],ok]
ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model
0x00ad2598, Re vision 0x00000001
ivtv: NTSC tuner detected
ivtv: Radio detected
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 10 streams
ivtv: Registered v4l2 device for encoder MPEG minor 0
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Registered v4l2 device for encoder YUV minor 32
ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
ivtv: Registered v4l2 device for encoder VBI minor 224
ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 24
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Registered v4l2 device for encoder radio minor 64
ivtv: Create encoder radio stream
ivtv: Registered v4l2 device for decoder MPEG minor 16
ivtv: Create DMA decoder MPEG stream: 0 x 65536 buffe rs (0KB total)
ivtv: Registered v4l2 device for decoder VBI minor 228
ivtv: Create DMA decoder VBI stream: 0 x 2048 buffers (0KB total)
ivtv: Registered v4l2 device for decoder VOUT minor 232
ivtv: Create decoder VOUT stream
ivtv: Registered v4l2 device for decoder YUV minor 48
ivtv: Create DMA decoder YUV stream: 0 x 43200 buffers (0KB total)
ivtv: Create DMA decoder OSD stream: 0 x 65536 buffers (0KB total)
ivtv: Setting Tuner 47
tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0
ivtv: ivtv_enc_thread: pid = 585, itv = 0xe0cb29a0
ivtv: ivtv_enc_vbi_thread: pid = 586, itv = 0xe0cb29a0
ivtv: ivtv_dec_thread: pid = 587, itv = 0xe0cb29a0
ivtv: ivtv_dec_vbi_thread: pid = 588, itv = 0xe0cb29a0
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
ivtv: Initialized WinTV PVR 350, card #0
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
ivtv: i2c attach [client=tveeprom[50],ok]
saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005)
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv: i2c attach [client=(tuner unset),ok]
ivtv: i2c attach [client=saa7127[50],ok]
ivtv: Tuner Type 39, Tuner formats 0x00001000, Radio: yes, Model
0x008d1612, Revision 0x00000000
ivtv: Radio detected
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device for encoder MPEG minor 1
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Registered v4l2 device for encoder YUV minor 33
ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
ivtv: Registered v4l2 device for encoder VBI minor 225
ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 25
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Registered v4l2 device for encoder radio minor 65
ivtv: Create encoder radio stream
ivtv: Setting Tuner 39
tuner: type set to 39 (LG NTSC (newer TAPC series)) by ivtv i2c driver #1
ivtv: Switching standard to NTSC.
ivtv: Initialized WinTV PVR 150, card #1
ivtv: ==================== END INIT IVTV ====================
ivtv: ivtv_enc_thread: pid = 608, itv = 0xe0cd5f54
ivtv: ivtv_enc_vbi_thread: pid = 609, itv = 0xe0cd5f54
ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and
has 1704960 bytes.
ivtv-osd: screen coords: [0 0] -> [720 480]
ivtv-osd: original global alpha = 208
ivtv-osd: current OSD state = 39
ivtv-osd: new global alpha = 208 (1 255 0)
ivtv-osd: framebuffer at 0xe1510000, mapp ed to 0xe1b90000, size 1350k
ivtv-osd: mode is 720x480x32, linelength=2880
ivtv-osd: fb1: iTVC15 TV out frame buffer device
ivtv: Allocate DMA decoder OSD stream: 16 x 65536 buffers (1024KB total)
ivtv: i2c attach [client=Hauppauge IR,ok]
ivtv: i2c attach [client=Hauppauge IR (PVR150),ok]
ivtv: Tried to open YUV output device but need to send data to mpeg
decoder before it can be used
ivtv: Tried to open YUV output device but need to send data to mpeg
decoder before it can be used
ivtv: Tried to open YUV output device but need to send data to mpeg
decoder before it can be used
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: Setup VBI API header 0x0000bd0d pkts 1 buffs 4 ln 24 sz 1456
ivtv: Setup VBI start 0x0018ea04 frames 4 fpi 1 lines 0x00000140
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.c om
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
