Anyone else seen this problem?  For some reason, my pvr150 is being
seen by ivtv as a pvr250.

here are my modprobe.conf details
# ivtv (PVR-150 MCE)
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias tveeprom tveeprom-ivtv
alias tuner tuner-ivtv
alias msp3400 msp3400-ivtv

and the output to messages:


Jul 27 13:40:11 localhost kernel: ivtv: ==================== START
INIT IVTV ====================
Jul 27 13:40:11 localhost kernel: ivtv: version 0.3.6 (w) loading
Jul 27 13:40:11 localhost kernel: ivtv: Linux version:
2.6.12-1.1398_FC4 686 REGPARM 4KSTACKS gcc-4.0
Jul 27 13:40:11 localhost kernel: ivtv: In case of problems please
include the debug info
Jul 27 13:40:11 localhost kernel: ivtv: between the START INIT IVTV
and END INIT IVTV lines when
Jul 27 13:40:11 localhost kernel: ivtv: mailing the ivtv-devel mailinglist.
Jul 27 13:40:11 localhost kernel: ivtv: Autodetected WinTV PVR 250 card
Jul 27 13:40:11 localhost kernel: ivtv: Found an iTVC16 based chip
Jul 27 13:40:11 localhost kernel: PCI: Found IRQ 3 for device 0000:02:0a.0
Jul 27 13:40:11 localhost kernel: PCI: Sharing IRQ 3 with 0000:02:0c.0
Jul 27 13:40:11 localhost kernel: ivtv: XXX PCI device: 0x2501 vendor: 0x8086
Jul 27 13:40:11 localhost kernel: tveeprom: Hauppauge: model = 26032,
rev = C182, serial# = 7935495
Jul 27 13:40:11 localhost kernel: tveeprom: tuner = LG TAPC H791F (idx
= 82, type = 39)
Jul 27 13:40:11 localhost kernel: tveeprom: tuner fmt = NTSC(M)
(eeprom = 0x08, v4l2 = 0x00001000)
Jul 27 13:40:11 localhost kernel: tveeprom: audio_processor = TDA9850 (type = 3)
Jul 27 13:40:11 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok]
Jul 27 13:40:11 localhost kernel: tuner: chip found at addr 0xc2
i2c-bus ivtv i2c driver #0
Jul 27 13:40:11 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok]
Jul 27 13:40:11 localhost kernel: saa7115: starting probe for adapter
ivtv i2c driver #0 (0x10005)
Jul 27 13:40:11 localhost kernel: ivtv: Tuner Type 39, Tuner formats
0x00001000, Radio: yes, Model 0x008d1612, Revision 0x00000000
Jul 27 13:40:11 localhost kernel: ivtv: NTSC tuner detected
Jul 27 13:40:11 localhost kernel: ivtv: Radio detected
Jul 27 13:40:12 localhost kernel: ivtv: Encoder revision: 0x02040024
Jul 27 13:40:12 localhost kernel: ivtv: Encoder Firmware may be buggy,
use version 0x02040011
Jul 27 13:40:12 localhost kernel: ivtv: Configuring WinTV PVR 250 card
with 5 streams
Jul 27 13:40:12 localhost kernel: ivtv: Registered v4l2 device for
encoder MPEG minor 0
Jul 27 13:40:12 localhost kernel: ivtv: Create DMA encoder MPEG
stream: 0 x 32768 buffers (0KB total)
Jul 27 13:40:12 localhost kernel: ivtv: Registered v4l2 device for
encoder YUV minor 32
Jul 27 13:40:12 localhost kernel: ivtv: Create DMA encoder YUV stream:
0 x 10800 buffers (0KB total)
Jul 27 13:40:12 localhost kernel: ivtv: Registered v4l2 device for
encoder VBI minor 224
Jul 27 13:40:12 localhost kernel: ivtv: Create DMA encoder VBI stream:
0 x 8736 buffers (0KB total)
Jul 27 13:40:12 localhost kernel: ivtv: Registered v4l2 device for
encoder PCM audio minor 24
Jul 27 13:40:12 localhost kernel: ivtv: Create DMA encoder PCM audio
stream: 0 x 4608 buffers (0KB total)
Jul 27 13:40:12 localhost kernel: ivtv: Registered v4l2 device for
encoder radio minor 64
Jul 27 13:40:12 localhost kernel: ivtv: Create encoder radio stream
Jul 27 13:40:12 localhost kernel: ivtv: Setting Tuner 39
Jul 27 13:40:12 localhost kernel: tuner: type set to 39 (LG NTSC
(newer TAPC series)) by ivtv i2c driver #0
Jul 27 13:40:12 localhost kernel: ivtv: i2c client addr: 0x21 not
found for command 0x40046403!
Jul 27 13:40:12 localhost kernel: ivtv: i2c client addr: 0x21 not
found for command 0x40046404!
Jul 27 13:40:12 localhost kernel: ivtv: Setting audio matrix to input
3, output 1
Jul 27 13:40:12 localhost kernel: ivtv: i2c client addr: 0x40 not
found for command 0x40086d11!
Jul 27 13:40:12 localhost kernel: ivtv: i2c client addr: 0x40 not
found for command 0x80287610!
Jul 27 13:40:12 localhost kernel: ivtv: i2c client addr: 0x40 not
found for command 0x40287611!
Jul 27 13:40:12 localhost kernel: ivtv: Switching standard to NTSC.
Jul 27 13:40:12 localhost kernel: ivtv: i2c client addr: 0x40 not
found for command 0x40307603!
Jul 27 13:40:12 localhost kernel: ivtv: i2c client addr: 0x21 not
found for command 0x40046403!
Jul 27 13:40:12 localhost kernel: ivtv: Initialized WinTV PVR 250, card #0
Jul 27 13:40:12 localhost kernel: ivtv: ====================  END INIT
IVTV  ====================


-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

Reply via email to