Re: [ivtv-devel] PVR 150 PAL Sound problems.

[Morten Rønseth]

Nick Rosier wrote: Derek, add this to your modules.conf: options tda9887 port1=0 port2=0 That should probably fix the problem. You might also want to add "tda9887=0,0,0" to the ivtv module options. At least that did the trick for me. N. On 8/4/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: Hi, I am having a problem with getting the sound to work on the newer versions of ivtv. To successfully get sound I have to go through the following process: 1. Install ivtv-0.3.2r 2. Do a cold reboot. At this stage I have video and sound, but the picture is blocky and of a poor quality. I then: 3. install ivtv-0.3.7b 4. modprobe -r ivtv; modprobe ivtv I now have a good picture and good sound. However if I warm or cold reboot the machine I then lose sound ( and have to go through the process again!) I am not passing any options to the ivtv modules in the modprobe config. I suspect the reason for the change is because after the installation of 0.3.7b the 0.3.2r cx25840 module is still loaded, but with the reboot the 0.3.7b module is loaded. Does anyone have any reasons / solutions for this? I have attached the dmesg output for: 0.3.2r after the cold boot; 0.3.7b ( step 4 ) 0.3.7b after warm reboot. Thanks, Derek. Cheers, -Morten -- ------------------------------------------------------------------- WEB-fx Morten Lerskau Rønseth http://www.webfx.no Odinsvei 15c mailto:[EMAIL PROTECTED] 1413 Tårnåsen Tlf.: (47) 6680 9191 Norway Mob : (47) 9343 4357