Newbie alert! Having wrestled with this all day, I'm giving up and asking for help...
My hardware: PVR-150 nonMCE retail tuner=38 (PCI ID 4444:0016) My signal: NTL analog cable, Dublin, Ireland, believed PAL-I My module options: modprobe tveeprom modprobe videodev modprobe cx25840 i2c_enable=1 modprobe tuner pal=i debug=1 modprobe wm8775 modprobe tda9887 pal=i debug=1 modprobe ivtv The problem is that the audio comes and goes. After tuning, it can take upwards of 60 seconds before anything is heard, yet the picture is fine. This is not volume-related; the sound is there, then gone, then back. I would be... annoyed if this is due to thermal effects. For starters, I don't know which audio module is actually responsible here; I'm loading msp3400, tda9887 and wm8775 (all are mentioned). After a cursory scan of this (rather active) mailing list, this problem seems most similar to (Fight Club's?) Tyler Durden's (unanswered) query. I have not (yet) tried older versions of the ivtv suite. Cheers, Phil [some uninteresting lines omitted for brevity] ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.7 (b) loading ivtv: Linux version: 2.6.12-1.1398_FC4 686 REGPARM 4KSTACKS gcc-4.0 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip tveeprom: Hauppauge: model = 26039, rev = C155, serial# = 2958909 tveeprom: tuner = Philips FQ1216ME MK3 (idx = 55, type = 38) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio_processor = MSP3400C (type = 4) ivtv: i2c attach [client=tveeprom[50],ok] cx25840: starting probe on adapter ivtv i2c driver #0 (0x10005) cx25840: detecting cx25840 client on address 0x88 cx25840: cx25842-23 found. Initializing... cx25840: requesting /lib/modules/HcwMakoA.ROM cx25840: firmware loaded ivtv: i2c attach [client=cx25840[50],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] ivtv: i2c attach [client=wm8775[50],ok] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach [client=tda9887,ok] ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model 0x008d1555, Revision 0x00000000 ivtv: PAL tuner detected ivtv: Radio detected ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Setting Tuner 38 tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0 cx25840: decoder set norm PAL cx25840: decoder set input (6) cx25840: now setting Tuner input cx25840: set audio input (0) ivtv: Switching standard to PAL. insmod fixup: PAL => PAL-I tda9885/6/7: insmod fixup: PAL => PAL-I tda9885/6/7: configure for: PAL-I tda9885/6/7: writing: b=0xd4 c=0x70 e=0x0a cx25840: decoder set norm PAL ivtv: Initialized WinTV PVR 150, card #0 ivtv: ==================== END INIT IVTV ==================== ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
