On Saturday 20 August 2005 22:31, Stephane Chauveau wrote:
> modprobe -v i2c_algo_bit
> modprobe -v tuner
> modprobe -v msp3400
> modprobe -v videodev
> modprobe -v saa7115
^^^ these are not needed (with the possible exception of i2c_algo_bit and
videodev). The others are loaded automatically.
> Remark: I also tried the 'recommanded' ones during a while but they would
> not autodetect the tuner and the PAL mode.
Try 0.3.7g. The tuners should be back :-)
> ./ivtvctl -p 4 # use tuner input
> ./ivtvctl -u 1 # use PAL
> ./ivtvctl -f "width=720,height=576" # PAL resolution
Don't do this, it's not needed.
> ./ptune.pl -fpal-europe -c 32
Are you sure this is the correct frequency? The picture looks like the
frequency was almost right but not quite. If you know the exact frequency
(e.g. Nederland 1 = 203.25 MHz then set the frequency with 16*203.25:
ivtvctl -f 3252.
Otherwise I see nothing strange in your log.
Hans
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
