[ivtv-devel] PVR-150 Setup/Install

[Brad Bonkoski]

Hello,

Point me to the proper place if this has been covered before, but I have not found anything that leads me in the right direction...

 

I have a PVR-150 card recently installed on my system.  I am using the 0.3.7-k version of ivtv.

After following the directions on the Wiki Howto site, I modprobe ivtv and get nothing.

My dmesg output is this:

Linux video capture interface: v1.00
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.7 (k) loading
ivtv: Linux version: 2.6.12-gentoo-r9 preempt K7 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: ====================  END INIT IVTV  ====================
 

And my lsmod output is this:

server ~ # lsmod
Module                  Size  Used by
ivtv                  207444  0
i2c_algo_bit            8840  1 ivtv
videodev                7360  1 ivtv
nvidia               3705412  12
sk98lin               170592  0
rtc                    10552  0
dm_mod                 52156  13
 

 

So it looks like something is missing here...

lspci looks like this:
server ~ # lspci
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
0000:00:01.0 ISA bridge: nVidia Corporation MCP2A ISA bridge (rev a3)
0000:00:01.1 SMBus: nVidia Corporation MCP2A SMBus (rev a1)
0000:00:02.0 USB Controller: nVidia Corporation MCP2A USB Controller (rev a1)
0000:00:02.1 USB Controller: nVidia Corporation MCP2A USB Controller (rev a1)
0000:00:02.2 USB Controller: nVidia Corporation MCP2A USB Controller (rev a2)
0000:00:04.0 Bridge: nVidia Corporation MCP2A Ethernet Controller (rev a3)
0000:00:06.0 Multimedia audio controller: nVidia Corporation MCP2S AC'97 Audio Controller (rev a1)
0000:00:08.0 PCI bridge: nVidia Corporation MCP2A PCI Bridge (rev a3)
0000:00:09.0 IDE interface: nVidia Corporation MCP2A IDE (rev a3)
0000:00:0b.0 IDE interface: nVidia Corporation nForce2 Serial ATA Controller (rev a3)
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
0000:02:07.0 Class 0080: Gammagraphx, Inc.: Unknown device 0080 (rev 08)
0000:02:07.1 Class 0080: Ncipher Corp Ltd: Unknown device 0080 (rev 08)
0000:02:07.2 Class 0080: Unknown device 0200:0080 (rev 08)
0000:02:07.3 Class 0080: Unknown device 0300:0080 (rev 08)
0000:02:07.4 Class 0080: Unknown device 0400:0080 (rev 08)
0000:02:07.5 Class 0080: Unknown device 0500:0080 (rev 08)
0000:02:07.6 Class 0080: Unknown device 0600:0080 (rev 08)
0000:02:07.7 Class 0080: Unknown device 0700:0080 (rev 08)
0000:02:08.0 Ethernet controller: VIA Technologies, Inc. VT86C100A [Rhine] (rev 06)
0000:02: 09.0 Ethernet controller: D-Link System Inc Gigabit Ethernet Adapter (rev 11)
- So it looks like it is recognizing some new hardware (unknown device)...

 

Any ideas of what is going on and where to go would be most appreciated.

Thanks

-Brad