> What is also odd is that the modules are found but the i2c attach messages
> appear after the END INIT line. It looks as if something is delayed. All
> those cx88000 unknown symbols also indicates something weird in your setup.
>
> Hans
>
Thanks Hans. I believe you are right. My system is weird ;-) Any ideas why the
messages could be delayed. I really haven't deviated (at least intentionally)
from Jarod's HOWTO.
I will try to start fresh tonight going from an ivtv version 0.2 and a working
PVR-350 system to an ivtv version 0.3.7k and PVR-350 + PVR-150 (hopefully!).
Before upgrading I will get rid of all the old drivers mentioned in various
posts and FAQs so that they don't create any problems. I'll probably disable
the ramdisk initially and ignore the TV-Out until I get everything else working
on my CRT first.
> It's not the same problem: the i2cdetect shows that it detects a device at
> address 0x44, something that was absent in the original problem.
>
I have to say that I'm was initially confused about your statement about the
i2cdetect output indicating that the address 0x44 is detected for my system but
not for Paul's. I see now that while there are a lot of messages indicating
something is not right at 0x44, my i2cdetect output has UU for 0x44 and Paul's
has XX. I miscounted the columns for Paul's output. (His output has UU at 0x43,
I thought it was 0x44). Sorry about that.
Here is my output:
> 0 1 2 3 4 5 6 7 8 9 a b c d e f
> 00: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
> 10: XX XX XX XX XX XX XX XX XX XX XX 1b XX XX XX XX
> 20: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
> 30: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
> 40: XX XX XX XX UU XX XX XX XX XX XX XX XX XX XX XX
> 50: UU XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
> 60: XX UU XX XX XX XX XX XX XX XX XX XX XX XX XX XX
> 70: 70 UU 72 73 XX XX XX XX XX XX XX XX XX XX XX XX
>
and here is Paul's
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
10: XX XX XX XX XX XX XX XX XX XX XX UU XX XX XX XX
20: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
30: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
40: XX XX XX UU XX XX XX XX XX XX XX XX XX XX XX XX
50: UU XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
60: XX UU XX XX XX XX XX XX XX XX XX XX XX XX XX XX
70: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
Ok. I'll try again tonight.
Thanks!
-Kenan
> > > ivtv: ==================== END INIT IVTV ====================
> > > ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
> > > ivtv-osd warning: Framebuffer is at decoder-relative address 0x00510000
> > > cx8800: Unknown symbol cx88_boards
> > > cx8800: Unknown symbol cx88_newstation
> > > lirc_i2c: chip found @ 0x18 (Hauppauge IR)
> > > ivtv: i2c attach to card #0 ok [client=Hauppauge IR, addr=18]
> > > lirc_dev: lirc_register_plugin: sample_rate: 10
> > > lirc_i2c: chip found @ 0x71 (Hauppauge IR (PVR150))
> > > ivtv: i2c attach to card #1 ok [client=Hauppauge IR (PVR150), addr=71]
> > > ...
> > > ivtv: i2c attach to card #0 ok [client=tveeprom, addr=50]
> > > ivtv: i2c attach to card #1 ok [client=tveeprom, addr=50]
> > > msp34xx: init: chip=MSP3448W-A2 +nicam +simple +simpler +radio
> > > mode=simpler msp34xxg: daemon started
> > > ivtv: i2c attach to card #0 ok [client=MSP3448W-A2, addr=40]
> > > msp3400: error while reading chip version
> > > ivtv: i2c attach to card #0 ok [client=saa7115[50], addr=21]
> > > ivtv: i2c attach to card #0 ok [client=saa7127[50], addr=44]
> > > cx25840: firmware /lib/modules/HcwMakoA.ROM loaded
> > > ivtv: i2c attach to card #1 ok [client=cx25840[50], addr=44]
> > > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
> > > ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
> > > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
> > > ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61]
>
>
> -------------------------------------------------------
> SF.Net email is sponsored by:
> Tame your development challenges with Apache's Geronimo App Server.
> Download it for free - -and be entered to win a 42" plasma tv or your very
> own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/ivtv-devel
>
>
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server.
Download it for free - -and be entered to win a 42" plasma tv or your very
own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
