Re: [ivtv-devel] Audio kicking in late

[Michel Verbraak]

Hans, Sorry for the late answer. I was a short weekend away. Just now (sun 25th september 20:40) I updated to subversion 2710 and the problem, audio kicking in late, seems to be gone. I will do some extra testing. Answers  to your question see below. Regards, Michel. Hans Verkuil wrote: On Saturday 24 September 2005 08:47, Michel Verbraak wrote: Hans, Spoke to soon. The sound kicking in late is still there on the same channels as before. Probably on my firt test the sound was found fast. Is there any tool to test the incoming signal strength for the set channel? Wat I will try this weekend, when I have time, to go back to the recomended firware versions to see if this fixes it. I'm still using the newer ones. Questions: 1) It happens only with your PVR150, right? Yes Only for my PVR150 (non MCE) 2) Which channels give the problem? And more specific: from which country? I'm in the Netherlands. Casema Soest and SBS6 (frequency 639,25), Net5 (681,25) and Ned3 (189,25) were the channels I had problems with. I'm pretty sure it's related to the cx25840 autodetect settings and not to any firmware versions. Doesn't do any harm to try, though, if only to rule out that approach. Hans ------------------------------------------------------- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel -8<--8<--8<--8<--8<--8<--8<--8<--8<--8<--8<--8<--8<--8<--8<--8<- ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.9 (development svn snapshot revision 2710) loading ivtv: Linux version: 2.6.12-1.1456_FC4smp SMP 686 REGPARM 4KSTACKS gcc-4.0 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 193 tveeprom: ivtv version tveeprom: Hauppauge: model = 26059, rev = C155, serial# = 7583011 tveeprom: tuner = Philips FQ1216ME MK3 (idx = 55, type = 38) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61] cx25840: loading /lib/modules/HcwMakoA.ROM ivtv: i2c attach to card #0 ok [client=cx25840, addr=44] ivtv: i2c attach to card #0 ok [client=wm8775, addr=1b] tda9885/6/7: (ivtv) chip found @ 0x86 ivtv: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv: loading /lib/modules/ivtv-fw-enc.bin ivtv: Encoder revision: 0x02050032 ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!! ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0 ivtv: Initialized WinTV PVR 150, card #0 ivtv: ======================  NEXT CARD  ====================== ivtv: Autodetected WinTV PVR 350 card (iTVC15 based) ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 201 tveeprom: ivtv version tveeprom: Hauppauge: model = 48134, rev = I121, serial# = 6182877 tveeprom: tuner = Philips FM1216 (idx = 21, type = 5) tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007) tveeprom: audio processor = MSP4418 (type = 19) tveeprom: decoder processor = SAA7115 (type = 13) ivtv: i2c attach to card #1 ok [client=tveeprom[50], addr=50] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61] ivtv: i2c attach to card #1 ok [client=saa7115[50], addr=21] saa7127 2-0044: saa7127 found @ 0x88 (ivtv i2c driver #1) ivtv: i2c attach to card #1 ok [client=saa7127, addr=44] msp34xx: ivtv version msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Sep 25 2005 20:34:43 ivtv: i2c attach to card #1 ok [client=MSP3418W-A2, addr=40] ivtv: loading /lib/modules/ivtv-fw-enc.bin ivtv: loading /lib/modules/ivtv-fw-dec.bin ivtv: Encoder revision: 0x02050032 ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!! ivtv: Decoder revision: 0x02020023 ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv: Create encoder radio stream ivtv: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) ivtv: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) ivtv: Create decoder VOUT stream ivtv: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total) tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by ivtv i2c driver #1 ivtv: Initialized WinTV PVR 350, card #1 ivtv: ====================  END INIT IVTV  ====================