Also very curious in this regard. Best Regards, -Thomas Scott
On Wed, Dec 6, 2023 at 12:58 PM Vincent Bernat via juniper-nsp < juniper-nsp@puck.nether.net> wrote: > Hey! > > cRPD documentation is quite terse about resource requirements: > > https://www.juniper.net/documentation/us/en/software/crpd/crpd-deployment/topics/concept/crpd-hardware-requirements.html > > When used as a route reflector with about 20 million routes, what kind > of hardware should we use? Documentation says about 64 GB of memory, but > for everything else? Notably, should we have many cores but lower boost > frequency, or not too many cores but higher boost frequency? > > There is a Day One book about cRPD, but they show a very outdated > processor (Sandy Lake, 10 years old). > > Is anyone using cRPD as RR with a similar scale and can share the > hardware configuration they use? Did you also optimize the underlying OS > in some way or just use a stock configuration? > > Thanks. > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp