On Tue, 24 Nov 2015 16:43:59 +0100
Christoffer Dall <christoffer.d...@linaro.org> wrote:
> We were incorrectly removing the active state from the physical
> distributor on the timer interrupt when the timer output level was
> deasserted. We shouldn't be doing this without considering the virtual
> interrupt's active state, because the architecture requires that when an
> LR has the HW bit set and the pending or active bits set, then the
> physical interrupt must also have the corresponding bits set.
>
> This addresses an issue where we have been observing an inconsistency
> between the LR state and the physical distributor state where the LR
> state was active and the physical distributor was not active, which
> shouldn't happen.
>
> Signed-off-by: Christoffer Dall <christoffer.d...@linaro.org>
> ---
> include/kvm/arm_vgic.h | 2 +-
> virt/kvm/arm/arch_timer.c | 28 +++++++++++++++++-----------
> virt/kvm/arm/vgic.c | 37 +++++++++++++++++++++++++------------
> 3 files changed, 43 insertions(+), 24 deletions(-)
>
> diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
> index 9c747cb..d2f4147 100644
> --- a/include/kvm/arm_vgic.h
> +++ b/include/kvm/arm_vgic.h
> @@ -342,10 +342,10 @@ int kvm_vgic_inject_mapped_irq(struct kvm *kvm, int
> cpuid,
> struct irq_phys_map *map, bool level);
> void vgic_v3_dispatch_sgi(struct kvm_vcpu *vcpu, u64 reg);
> int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu);
> -int kvm_vgic_vcpu_active_irq(struct kvm_vcpu *vcpu);
> struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu,
> int virt_irq, int irq);
> int kvm_vgic_unmap_phys_irq(struct kvm_vcpu *vcpu, struct irq_phys_map *map);
> +bool kvm_vgic_map_is_active(struct kvm_vcpu *vcpu, struct irq_phys_map *map);
>
> #define irqchip_in_kernel(k) (!!((k)->arch.vgic.in_kernel))
> #define vgic_initialized(k) (!!((k)->arch.vgic.nr_cpus))
> diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c
> index 21a0ab2..69bca18 100644
> --- a/virt/kvm/arm/arch_timer.c
> +++ b/virt/kvm/arm/arch_timer.c
> @@ -221,17 +221,23 @@ void kvm_timer_flush_hwstate(struct kvm_vcpu *vcpu)
> kvm_timer_update_state(vcpu);
>
> /*
> - * If we enter the guest with the virtual input level to the VGIC
> - * asserted, then we have already told the VGIC what we need to, and
> - * we don't need to exit from the guest until the guest deactivates
> - * the already injected interrupt, so therefore we should set the
> - * hardware active state to prevent unnecessary exits from the guest.
> - *
> - * Conversely, if the virtual input level is deasserted, then always
> - * clear the hardware active state to ensure that hardware interrupts
> - * from the timer triggers a guest exit.
> - */
> - if (timer->irq.level)
> + * If we enter the guest with the virtual input level to the VGIC
> + * asserted, then we have already told the VGIC what we need to, and
> + * we don't need to exit from the guest until the guest deactivates
> + * the already injected interrupt, so therefore we should set the
> + * hardware active state to prevent unnecessary exits from the guest.
> + *
> + * Also, if we enter the guest with the virtual timer interrupt active,
> + * then it must be active on the physical distributor, because we set
> + * the HW bit and the guest must be able to deactivate the virtual and
> + * physical interrupt at the same time.
> + *
> + * Conversely, if the virtual input level is deasserted and the virtual
> + * interrupt is not active, then always clear the hardware active state
> + * to ensure that hardware interrupts from the timer triggers a guest
> + * exit.
> + */
> + if (timer->irq.level || kvm_vgic_map_is_active(vcpu, timer->map))
> phys_active = true;
> else
> phys_active = false;
> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
> index 5335383..9002f0d 100644
> --- a/virt/kvm/arm/vgic.c
> +++ b/virt/kvm/arm/vgic.c
> @@ -1096,6 +1096,30 @@ static void vgic_retire_lr(int lr_nr, struct kvm_vcpu
> *vcpu)
> vgic_set_lr(vcpu, lr_nr, vlr);
> }
>
> +static int dist_active_irq(struct kvm_vcpu *vcpu)
bool? That'd be consistent with kvm_vgic_map_is_active.
> +{
> + struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
> +
> + if (!irqchip_in_kernel(vcpu->kvm))
> + return 0;
> +
I believe you can drop this test, as the only other use case for this
function is on the flush path, which obviously mandates an in-kernel
irqchip.
> + return test_bit(vcpu->vcpu_id, dist->irq_active_on_cpu);
> +}
> +
> +bool kvm_vgic_map_is_active(struct kvm_vcpu *vcpu, struct irq_phys_map *map)
> +{
> + int i;
> +
> + for (i = 0; i < vcpu->arch.vgic_cpu.nr_lr; i++) {
> + struct vgic_lr vlr = vgic_get_lr(vcpu, i);
> +
> + if (vlr.irq == map->virt_irq && vlr.state & LR_STATE_ACTIVE)
> + return true;
> + }
> +
> + return dist_active_irq(vcpu);
> +}
> +
> /*
> * An interrupt may have been disabled after being made pending on the
> * CPU interface (the classic case is a timer running while we're
> @@ -1248,7 +1272,7 @@ static void __kvm_vgic_flush_hwstate(struct kvm_vcpu
> *vcpu)
> * may have been serviced from another vcpu. In all cases,
> * move along.
> */
> - if (!kvm_vgic_vcpu_pending_irq(vcpu) && !kvm_vgic_vcpu_active_irq(vcpu))
> + if (!kvm_vgic_vcpu_pending_irq(vcpu) && !dist_active_irq(vcpu))
> goto epilog;
>
> /* SGIs */
> @@ -1479,17 +1503,6 @@ int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu)
> return test_bit(vcpu->vcpu_id, dist->irq_pending_on_cpu);
> }
>
> -int kvm_vgic_vcpu_active_irq(struct kvm_vcpu *vcpu)
> -{
> - struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
> -
> - if (!irqchip_in_kernel(vcpu->kvm))
> - return 0;
> -
> - return test_bit(vcpu->vcpu_id, dist->irq_active_on_cpu);
> -}
> -
> -
> void vgic_kick_vcpus(struct kvm *kvm)
> {
> struct kvm_vcpu *vcpu;
Other than the above nits:
Reviewed-by: Marc Zyngier <marc.zyng...@arm.com>
M.
--
Jazz is not dead. It just smells funny.
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
