Forgot --
Here is the output of the filter list:
# svi network ipfilter list portfw
prot localaddr rediraddr lport rport pcnt pref
TCP 64.255.208.60 192.168.1.8 21 21 10 10
Michael McClure wrote:
> I'm running Eigerstein on 1.6MB floppy with the VPNMasq Kernal.
>
> I've decided to run a simple FTP server inside my firewall. I have to
> have this working by tomorrow mid-day -- giving a little presentation
> and have to have an FTP site to download off of. Everybody's problems
> related to FTP seemed to be re: Passive, so I figured that Active was
> easy to configure...guess sometimes not. I made the change to the
> "INTERN_FTP_SERVER" to the correct IP and uncommented it. (This is
> what I did to forward SSH to the internal ssh server -- uncomment the
> INTERN_SSH_SERVER variable and set the IP...and it works perfectly.
>
> However, when I try to FTP to the IP of the LRP from an entirely
> different network (I have 2 DSL drops from two separate ISP's), I get
> a timeout on the ftp:
>
> C:\WINNT>ftp 64.255.208.60
> > ftp: connect :Connection timed out
> ftp> quit
>
>
> From inside the LRP, I'm able to successfully initiate an FTP session
> using the internal 192.168.1.8 IP address.
>
> Any thoughts? I don't have to use a browser for the FTP as the people
> I'm going to let in all know how to use DOS Ftp and will be named users.
>
> My FTP server is War-FTP on Win98.
>
> Here is that section of the network.conf file. Note that the SSH
> stuff is still commented out -- that successfull SSH forwarding that I
> talked about above was for my work -- this FTP thing is from home.
>
> # Allows the firewall to be trusted for ssh access to routers...
> # Override for below
> #NOMASQ_DEST_BYPASS="tcp_10.0.0.1_ssh"
> # services not to be masqueraded
> #NOMASQ_DEST="tcp_0/0_ssh"
> # Uncomment following for internal services.
> # The following is an example of what should be put here.
> # Tuples are as follows:
> # <protocol>_<extern-ip>_<extern-port>_<intern-ip>_<intern-port>
> #INTERN_SERVERS="tcp_${EXTERN_IP}_ftp_192.168.1.1_ftp
> tcp_${EXTERN_IP}_smtp_192.168.1.1_smtp
>
> # These lines use the primary external IP address...if you need to
> port-forward
> # an aliased IP address, use the INTERN_SERVERS setting above
> INTERN_FTP_SERVER=192.168.1.8 # Internal FTP server to make available
> #INTERN_WWW_SERVER=192.168.1.1 # Internal WWW server to make available
> #INTERN_SMTP_SERVER=192.168.1.1 # Internal SMTP server to make available
> #INTERN_POP3_SERVER=192.168.1.1 # Internal POP3 server to make available
> #INTERN_IMAP_SERVER=192.168.1.1 # Internal IMAP server to make available
> #INTERN_SSH_SERVER=192.168.1.1 # Internal SSH server to make available
> #EXTERN_SSH_PORT=24 # External port to use for internal
> SSH access
>
>
> I saw the INTERN_SERVERS line, but I assumed that since I didn't have
> external IP addresses, that it still stays uncommented as it did on my
> other router for SSH forwarding.....
>
>
>
> thanks.
>
> mike.
>
>
> _______________________________________________
> Leaf-user mailing list
> [EMAIL PROTECTED]
> http://lists.sourceforge.net/lists/listinfo/leaf-user
>
>
_______________________________________________
Leaf-user mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/leaf-user
