Hi all,
I recently upgraded my router because I made a mistake and lost all of my
setup I had on a 2.4 version. Consequently I lost all my setup
configuration I had previously working. Currently, the 3.x setup is working
well and I want to add a wireless AP which I had used previously. I think
some of my documentation is out of date though because the AP won't come up.
Here's what I am doing.
# /etc/network/interfaces -- configuration file for LEAF network
#
# Step 7 (optional): configure wireless AP (Madwifi)
auto ath0
iface ath0 inet static
address 192.168.2.1
netmask 255.255.0.0
broadcast 192.168.2.255
madwifi-base wifi0
wireless-channel 1
wireless-essid test
wireless-mode master
up /sbin/iwpriv/ ath0 mode 3
# /etc/modules: kernel modules to load at boot time.
# Wireless AP (Madwifi)
wlan
wlan_scan_ap
ath_hal
ath_rate_sample
ath_pci_autocreate=none
# Shorewall version 3.2 - Zones File
###############################################################################
#ZONE TYPE OPTIONS IN OUT
# OPTIONS OPTIONS
fw firewall
net ipv4
loc ipv4
#wls ipv4
#dmz ipv4
# Shorewall version 3.2 - Interfaces File
###############################################################################
#ZONE INTERFACE BROADCAST OPTIONS
net eth0 detect dhcp,routefilter,norfc1918
loc eth1 detect dhcp
#wls ath0 detect
# Shorewall version 3.2 - Rules File
##############################################################################################################
#ACTION SOURCE DEST PROTO DEST SOURCE
ORIGINAL RATE USER/
# PORT(S) PORT(S) DEST
LIMIT GROUP
#SECTION ESTABLISHED
#SECTION RELATED
SECTION NEW
# Accept DNS connections from the firewall to the network
# and from the local network to the firewall (in case dnsmasq is
running)
DNS/ACCEPT fw net
DNS/ACCEPT loc fw
#DNS/ACCEPT wls fw
# Shorewall version 3.2 - Masq file
###############################################################################
#INTERFACE SUBNET ADDRESS PROTO PORT(S) IPSEC
eth0 eth1
#eth0 ath0
I know I have commented out all my shorewall entries for now. I am trying
to get the card up and running as stage 1 of fixing this problem. When
running ip address show I don't even see any mention of ath0 (or is it
wifi0).
firewall# ip -s addr
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,NOTRAILERS,UP> mtu 1500 qdisc pfifo_fast qlen
1000
link/ether 00:a0:24:bf:7c:44 brd ff:ff:ff:ff:ff:ff
inet 24.208.38.228/21 brd 255.255.255.255 scope global eth0
4: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:01:03:dd:fd:e1 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.254/24 brd 192.168.1.255 scope global eth1
5: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
link/ether 00:a0:24:75:b2:50 brd ff:ff:ff:ff:ff:ff
Either way, I know that needs to be fixed first. Once that is done than I
can take care of the shorewall portion of this. Thanks in advance for your
help.
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
------------------------------------------------------------------------
leaf-user mailing list: [email protected]
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/
