Here is how I setup dyndns on a LEAF box running dhcpcd for the external
interface.
****
mount your package source
# apkg -i /mnt/ezipupd
verify the package loads alright
# umount /mnt
****
# lrcfg - configure ezipupd /etc/ez-ipupd.conf
service-type=dyndns-custom
user=dyndns_username:dyndns_password
interface=eth0
host=hostname.selfip.org #the dyndns host names to reset go here.
# notify-email= Comment out
#daemon - comment out daemon mode so it runs interactively
<CTRL>< q> <y> to save file
****
edit /etc/shorewall/ rules and add
# allow fw to access members.dyndns.org
HTTP/ACCEPT fw net:63.208.196.95/26
<CTRL><q> <y> to save file
<q> to exit lrcfg
***
restart shorewall to make sure you have no typos and so firewall can
access dyndns
# shorewall restart
send your ip to dyndns by hand
# svi ez-ipupd start
you should get a response - either success or failure with a reason why
it failed.
I haven't tested this part out yet - to call ez-ipupd when the ip changes.
# edit /etc/dhcpc/dhcpcd.exe
scroll down to the case where interface has been brought up with new ip
just below the line where shorewall is refreshed add
/etc/init.d/ez-ipupd start
# lrcfg and save the configuration.
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
------------------------------------------------------------------------
leaf-user mailing list: [email protected]
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/
