Bonjour,
Suite � une recherche dans le man de sane, j'ai trouv� la solution:
Il faut et il suffit de
sane-find-scanner ->
found USB scanner (vendor=0x04b8 [EPSON], product=0x011b [EPSON Scanner]) at
libusb:004:002
canimage -L ->
device `epson:libusb:004:002' is a Epson GT-9300 flatbed scanner
La m�me commande sous user ajoute:
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
dans man sane-usb ->
The permissions for the device files used by libusb must be adjusted for user access.
Otherwise only root can use SANE devices. For Linux, the devices are located in
/proc/bus/usb/. There are directories named e.g. "001" (the bus name) containing
files "001", "002" etc. (the device files). The right device files can be found out by
running scanimage -L as root.
_Setting permissions with "chmod" is not permanent, however. They will be resetted
after reboot or replugging the scanner._
It's also possible to mount the usbfs with the option "devmode=0666",
e.g. by using the following line in /etc/fstab:
none /proc/bus/usb usbfs defaults,devmode=0666 0 0
-- je vais essayer.
J'ai donc chang� /proc/bus/usb/004/002 ->
-rw-rw-r-- 1 root users 50 2004-10-14 10:27 /proc/bus/usb/004/002
et �a fonctionne !
Mes excuses pour la panique.
--
_ --------------------- _
(o- Jean-Claude Hendrickx -o)
//\ Linux et mon Droit /\\
v_/_ _____________________ _\_v
_______________________________________________________
Linux Mailing List - http://www.unixtech.be
Subscribe/Unsubscribe: http://www.unixtech.be/mailman/listinfo/linux
Archives: http://www.mail-archive.com/[EMAIL PROTECTED]
IRC: chat.unixtech.be:6667 - #unixtech
