Can this one also be added to 2.6.19.X kernel.
Beside the Thinkpad it also seems to fix other system:
http://bugzilla.kernel.org/show_bug.cgi?id=7859


Thanks,

    Thomas

-------- Forwarded Message --------
From: Len Brown <[EMAIL PROTECTED]>
To: linux-acpi@vger.kernel.org
Subject: Fwd: [patch] ACPI: fix cpufreq regression
Date:   Tue, 16 Jan 2007 22:13:14 -0500

> nobody else with a T60 noticed this since November?

I expect it's because the patch which caused the regression,
seemed to be rather safe and came in quite late...



----------  Forwarded Message  ----------

Subject: [patch] ACPI: fix cpufreq regression
Date: Tuesday 16 January 2007 12:09
From: Ingo Molnar <[EMAIL PROTECTED]>
To: Andrew Morton <[EMAIL PROTECTED]>
Cc: linux-kernel@vger.kernel.org, Dave Jones <[EMAIL PROTECTED]>, Linus 
Torvalds <[EMAIL PROTECTED]>, Len Brown <[EMAIL PROTECTED]>

Subject: [patch] ACPI: fix cpufreq regression
From: Ingo Molnar <[EMAIL PROTECTED]>

recently cpufreq support on my laptop (Lenovo T60) broke completely: 
when it's plugged into AC it would never go higher than 1 GHz - neither 
1.3 GHz nor 1.83 GHz is possible - no matter which governor (userspace, 
speed or ondemand) is used.

after some cpufreq debugging i tracked the regression back to the 
following (totally correct) bug-fix commit:

   commit 0916bd3ebb7cefdd0f432e8491abe24f4b5a101e
   Author: Dave Jones <[EMAIL PROTECTED]>
   Date:   Wed Nov 22 20:42:01 2006 -0500

    [PATCH] Correct bound checking from the value returned from _PPC method.

this bugfix, which makes other laptops work, made a previously hidden 
(BIOS) bug visible on my laptop.

The bug is the following: if the _PPC (Performance Present Capabilities) 
optional ACPI object is queried /after/ bootup then the BIOS reports an 
incorrect value of '2'.

My laptop (Lenovo T60) has the following performance states supported:

   0: 1833000
   1: 1333000
   2: 1000000

Per ACPI specification, a _PPC value of '0' means that all 3 performance 
states are usable. A _PPC value of '1' means states 1 .. 2 are usable, a 
value of '2' means only state '2' (slowest) is usable.

now, the _PPC object is optional, and it also comes with notification. 
Furthermore, when a CPU object is initialized, the _PPC object is 
initialized as well. So the following evaluation of the _PPC object is 
superfluous:

 [<c028ba5f>] acpi_processor_get_platform_limit+0xa1/0xaf
 [<c028c040>] acpi_processor_register_performance+0x3b9/0x3ef
 [<c0111a85>] acpi_cpufreq_cpu_init+0xb7/0x596
 [<c03dab74>] cpufreq_add_dev+0x160/0x4a8
 [<c02bed90>] sysdev_driver_register+0x5a/0xa0
 [<c03d9c4c>] cpufreq_register_driver+0xb4/0x176
 [<c068ac08>] acpi_cpufreq_init+0xe5/0xeb
 [<c010056e>] init+0x14f/0x3dd

and this is the point where my laptop's BIOS returns the incorrect value 
of '2'. Note that it has not sent any notification event, so the value 
is probably not really intentional (possibly spurious), and Windows 
likely doesnt query it after bootup either. Maybe the value is kept at 
'2' normally, and is only set to the real value when a true asynchronous 
event (such as AC plug event, battery switch, etc.) occurs.

So i /think/ this is a grey area of the ACPI spec: per the letter of the 
spec the _PPC value only changes when notified, so there's no reason to 
query it after the system has booted up. So in my opinion the best (and 
most compatible) strategy would be to do the change below, and to not 
evaluate the _PPC object in the acpi_processor_get_performance_info() 
call, but only evaluate it if _PPC is present during CPU object init, or 
if it's notified during an asynchronous event. This change is more 
permissive than the previous logic, so it definitely shouldnt break any 
existing system.

This also happens to fix my laptop, which is merrily chugging along at 
1.83 GHz now. Yay!

Signed-off-by: Ingo Molnar <[EMAIL PROTECTED]>
---
 drivers/acpi/processor_perflib.c |    4 ----
 1 file changed, 4 deletions(-)

Index: linux/drivers/acpi/processor_perflib.c
===================================================================
--- linux.orig/drivers/acpi/processor_perflib.c
+++ linux/drivers/acpi/processor_perflib.c
@@ -322,10 +322,6 @@ static int acpi_processor_get_performanc
        if (result)
                return result;
 
-       result = acpi_processor_get_platform_limit(pr);
-       if (result)
-               return result;
-
        return 0;
 }
 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/


-------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to