On Wed, 2007-10-24 at 19:00 +0100, Andrew wrote: > Hi, > > This is probably nothing since there seems to be no ill effects > but I thought someone should know because...well it bothers me. > > Heres a diff of the kernel boot log between 2.6.23 and 2.6.24: > > scsi4 : pata_amd > scsi5 : pata_amd > -ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma > 0x000000000001ffa0 irq 14 > -ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma > 0x000000000001ffa8 irq 15 > +ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 > +ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 > +ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFF) is > beyond end of > object [20070126] > +ACPI Error (psparse-0537): Method parse/execution failed > [\_SB_.PCI0.IDE0.GTM_] (Node > ffff810002001740), AE_AML_PACKAGE_LIMIT > +ACPI Error (psparse-0537): Method parse/execution failed > [\_SB_.PCI0.IDE0.CHN1._GTM] (Node > ffff810002001620), AE_AML_PACKAGE_LIMIT > +ata6: ACPI get timing mode failed (AE 0x300d) > ata6.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL13, max UDMA/33 > ata6.00: configured for UDMA/33 I doubt the ACPI interpreter broke between those kernels... Is this the same message as seen when _GTM/_STM were invoked in wrong order (or the one not invoked at all)? Tejun might be interested in this one...
Thanks, Thomas > > ...and lspci output: > > 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) (prog-if 8a > [Master SecP PriP]) > Subsystem: Unknown device f043:81bc > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- > FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- > >SERR- <PERR- INTx- > Latency: 0 (750ns min, 250ns max) > Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) > [disabled] [size=8] > Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) > [disabled] [size=1] > Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) > [disabled] [size=8] > Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) > [disabled] [size=1] > Region 4: I/O ports at ffa0 [size=16] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > So, is it a bug? > Please CC as I am not subscribed. > - To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
