Pavel Machek wrote: > Hi! > >> > > > It works. Subjectively I have relatively long pause after first >> > > > Suspending console message (where it hangs otherwise), according to >> > > > dmesg timestamp it is about 1 second before next messages appear. >> > > > Also last two times I tried it writeout of suspend image was really >> > > > slow; it was both with and without battery. Reading on resume in >> > > > really in order of magnitude faster. >> > > > >> > > > But manual STD so far works both on AC (with or without battery) or >> > > > on battery. >> > > > >> > > > Of course it is possible that battery gets exhausted during STD, >> > > > but system is not switched off. Rather I would suspect something >> > > > like ACPI notification that comes during freeze ... >> > > >> > > Frankly, I'm suspecting a deadlock in the ACPI code. >> > > >> > > Please try to make kpowersave start hibernation a bit earlier and see >> > > what happens. >> > > >> > > What's your critical time now? >> > > >> > > >> > >> > it was set to 5%. Setting it to 10% makes it work, but it just confirms >> > what I said before - suspend-to-RAM in normal battery conditions (or >> > without battery) works. >> >> Yes. > > I have something similar in suse bugzilla, but there the claim is 'it > always works if I trigger it manually'.
ehh ... did not I say exactly the same thing? P.S. may I ask you to reply to all - at least to the person who initiated this thread ... - To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
