Hello Herbert,
Currently twofish cipher key setup code
has unrolled loops - approximately 70-100
instructions are repeated 40 times.
As a result, twofish module is the biggest module
in crypto/*.
Attached patch conditionalize this unrolling on
CONFIG_CC_OPTIMIZE_FOR_SIZE. Presumably, people which
want to use -Os will also prefer to not have these loops
unrolled:
$ size */twofish_common.o
text data bss dec hex filename
37920 0 0 37920 9420 crypto.org/twofish_common.o
13209 0 0 13209 3399 crypto/twofish_common.o
Run tested (modprobe tcrypt reports ok). Please apply.
Signed-off-by: Denys Vlasenko <[EMAIL PROTECTED]>
--
vda
--- linux-2.6.23.crypto/crypto/twofish_common0.c Sun Oct 21 18:30:14 2007
+++ linux-2.6.23.crypto/crypto/twofish_common.c Sun Oct 21 18:17:36 2007
@@ -655,6 +655,23 @@
CALC_SB256_2( i, calc_sb_tbl[j], calc_sb_tbl[k] );
}
+ /* Unrolling produces x2.5 more code (+18k on i386),
+ * and speeds up key setup by 7%:
+ * unrolled: twofish_setkey/sec: 41128
+ * loop: twofish_setkey/sec: 38148
+ * CALC_K256: ~100 insns each
+ * CALC_K192: ~90 insns
+ * CALC_K: ~70 insns
+ */
+#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+ /* Calculate whitening and round subkeys */
+ for ( i = 0; i < 8; i += 2 ) {
+ CALC_K256 (w, i, q0[i], q1[i], q0[i+1], q1[i+1]);
+ }
+ for ( i = 0; i < 32; i += 2 ) {
+ CALC_K256 (k, i, q0[i+8], q1[i+8], q0[i+9], q1[i+9]);
+ }
+#else
/* Calculate whitening and round subkeys. The constants are
* indices of subkeys, preprocessed through q0 and q1. */
CALC_K256 (w, 0, 0xA9, 0x75, 0x67, 0xF3);
@@ -677,12 +694,22 @@
CALC_K256 (k, 26, 0x8B, 0xAE, 0x30, 0x5B);
CALC_K256 (k, 28, 0x84, 0x8A, 0x54, 0x00);
CALC_K256 (k, 30, 0xDF, 0xBC, 0x23, 0x9D);
+#endif
} else if (key_len == 24) { /* 192-bit key */
/* Compute the S-boxes. */
for ( i = j = 0, k = 1; i < 256; i++, j += 2, k += 2 ) {
CALC_SB192_2( i, calc_sb_tbl[j], calc_sb_tbl[k] );
}
+#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+ /* Calculate whitening and round subkeys */
+ for ( i = 0; i < 8; i += 2 ) {
+ CALC_K192 (w, i, q0[i], q1[i], q0[i+1], q1[i+1]);
+ }
+ for ( i = 0; i < 32; i += 2 ) {
+ CALC_K192 (k, i, q0[i+8], q1[i+8], q0[i+9], q1[i+9]);
+ }
+#else
/* Calculate whitening and round subkeys. The constants are
* indices of subkeys, preprocessed through q0 and q1. */
CALC_K192 (w, 0, 0xA9, 0x75, 0x67, 0xF3);
@@ -705,12 +732,22 @@
CALC_K192 (k, 26, 0x8B, 0xAE, 0x30, 0x5B);
CALC_K192 (k, 28, 0x84, 0x8A, 0x54, 0x00);
CALC_K192 (k, 30, 0xDF, 0xBC, 0x23, 0x9D);
+#endif
} else { /* 128-bit key */
/* Compute the S-boxes. */
for ( i = j = 0, k = 1; i < 256; i++, j += 2, k += 2 ) {
CALC_SB_2( i, calc_sb_tbl[j], calc_sb_tbl[k] );
}
+#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+ /* Calculate whitening and round subkeys */
+ for ( i = 0; i < 8; i += 2 ) {
+ CALC_K (w, i, q0[i], q1[i], q0[i+1], q1[i+1]);
+ }
+ for ( i = 0; i < 32; i += 2 ) {
+ CALC_K (k, i, q0[i+8], q1[i+8], q0[i+9], q1[i+9]);
+ }
+#else
/* Calculate whitening and round subkeys. The constants are
* indices of subkeys, preprocessed through q0 and q1. */
CALC_K (w, 0, 0xA9, 0x75, 0x67, 0xF3);
@@ -733,6 +770,7 @@
CALC_K (k, 26, 0x8B, 0xAE, 0x30, 0x5B);
CALC_K (k, 28, 0x84, 0x8A, 0x54, 0x00);
CALC_K (k, 30, 0xDF, 0xBC, 0x23, 0x9D);
+#endif
}
return 0;
