Kunpeng930 SEC adds several new hardware error types. This patch enables
the new error types and configures the error types as NFE.

Signed-off-by: Weili Qian <qianwe...@huawei.com>
---
 drivers/crypto/hisilicon/sec2/sec_main.c | 26 +++++++++++++++++++++++---
 1 file changed, 23 insertions(+), 3 deletions(-)

diff --git a/drivers/crypto/hisilicon/sec2/sec_main.c 
b/drivers/crypto/hisilicon/sec2/sec_main.c
index 26b9904..6f0062d 100644
--- a/drivers/crypto/hisilicon/sec2/sec_main.c
+++ b/drivers/crypto/hisilicon/sec2/sec_main.c
@@ -42,8 +42,8 @@
 #define SEC_ECC_NUM                    16
 #define SEC_ECC_MASH                   0xFF
 #define SEC_CORE_INT_DISABLE           0x0
-#define SEC_CORE_INT_ENABLE            0x1ff
-#define SEC_CORE_INT_CLEAR             0x1ff
+#define SEC_CORE_INT_ENABLE            0x7c1ff
+#define SEC_CORE_INT_CLEAR             0x7c1ff
 #define SEC_SAA_ENABLE                 0x17f
 
 #define SEC_RAS_CE_REG                 0x301050
@@ -51,7 +51,7 @@
 #define SEC_RAS_NFE_REG                        0x301058
 #define SEC_RAS_CE_ENB_MSK             0x88
 #define SEC_RAS_FE_ENB_MSK             0x0
-#define SEC_RAS_NFE_ENB_MSK            0x177
+#define SEC_RAS_NFE_ENB_MSK            0x7c177
 #define SEC_RAS_DISABLE                0x0
 #define SEC_MEM_START_INIT_REG 0x301100
 #define SEC_MEM_INIT_DONE_REG          0x301104
@@ -147,6 +147,26 @@ static const struct sec_hw_error sec_hw_errors[] = {
                .int_msk = BIT(8),
                .msg = "sec_chain_buff_err_rint"
        },
+       {
+               .int_msk = BIT(14),
+               .msg = "sec_no_secure_access"
+       },
+       {
+               .int_msk = BIT(15),
+               .msg = "sec_wrapping_key_auth_err"
+       },
+       {
+               .int_msk = BIT(16),
+               .msg = "sec_km_key_crc_fail"
+       },
+       {
+               .int_msk = BIT(17),
+               .msg = "sec_axi_poison_err"
+       },
+       {
+               .int_msk = BIT(18),
+               .msg = "sec_sva_err"
+       },
        {}
 };
 
-- 
2.8.1

Reply via email to