On Sat, 15 Mar 2008 18:33:56 +0900
timf <[EMAIL PROTECTED]> wrote:
> [ 15.000000] saa7133[0]: subsystem: 1461:f936, board: AVerMedia Hybrid
> TV/Radio (A16D) [card=137,autodetected]
> [ 15.296000] tuner' 2-0061: Setting mode_mask to 0x0e
> [ 15.296000] tuner' 2-0061: chip found @ 0xc2 (saa7133[0])
> [ 15.296000] tuner' 2-0061: tuner 0x61: Tuner type absent
The above is not right. It should be using type=71 for the tuner.
I think I found the bug: the tuner addresses should be set to ADDR_UNSET,
instead of keeping it blank.
Please do an "hg pull -u" and try again, recompiling and re-installing the
modules:
hg pull -u
make rmmod
make
make install
modprobe saa7134
> 8) The chip on my card is xc3018. Why does module xc5000 load?
This is an issue on the way cards are attached, at tuner_core. Since they
directly access xc5000 code, with:
if (!xc5000_attach(&t->fe, t->i2c->adapter, &xc5000_cfg)) {
xc5000 module will be loaded, even if not used. It shouldn't be hard to fix
this, by using the macro dvb_attach().
Cheers,
Mauro
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
