> I'm a bit stumped... Would you mind also showing us dmesg after a > clean > boot into vanilla 2.6.18-rc6 WITHOUT linuxtv.org hg tip?
Full machine config: Core2 Duo 6400 (2x2.13Ghz) Gigabyte 965-S3 (Intel 965 Chipset, ICH8) 2xDViCo FushionHDTV DVB-T Plus Vanilla 2.6.18-rc6: ... cx2388x v4l2 driver version 0.0.6 loaded PM: Adding info for No Bus:usbdev7.1_ep81 ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 225 eth0: RealTek RTL8139 at 0xf8880000, 00:0d:88:44:2b:dd, IRQ 225 eth0: Identified 8139 chip type 'RTL-8100B/8139D' ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 20 (level, low) -> IRQ 58 CORE cx88[0]: subsystem: 18ac:db10, board: DViCO FusionHDTV DVB-T Plus [card=21,autodetected] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe PM: Adding info for No Bus:i2c-1 cx88[0]/0: found at 0000:05:00.0, rev: 5, irq: 58, latency: 32, mmio: 0xe9000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 177 CORE cx88[1]: subsystem: 18ac:db10, board: DViCO FusionHDTV DVB-T Plus [card=21,autodetected] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:00:1b.0 to 64 PM: Adding info for No Bus:i2c-2 cx88[1]/0: found at 0000:05:01.0, rev: 5, irq: 177, latency: 32, mmio: 0xeb000000 cx88[1]/0: registered device video1 [v4l2] cx88[1]/0: registered device vbi1 usb 5-1: new low speed USB device using uhci_hcd and address 2 PM: Adding info for usb:5-1 PM: Adding info for No Bus:usbdev5.2_ep00 usb 5-1: configuration #1 chosen from 1 choice PM: Adding info for usb:5-1:1.0 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... input: Logitech USB Receiver as /class/input/input1 input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-1 PM: Adding info for No Bus:usbdev5.2_ep81 PM: Adding info for usb:5-1:1.1 cx2388x dvb driver version 0.0.6 loaded input: Logitech USB Receiver as /class/input/input2 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-1 PM: Adding info for No Bus:usbdev5.2_ep82 ACPI: PCI Interrupt 0000:05:00.2[A] -> GSI 20 (level, low) -> IRQ 58 cx88[0]/2: found at 0000:05:00.2, rev: 5, irq: 58, latency: 32, mmio: 0xea000000 cx88[0]/2: cx2388x based dvb card DVB: registering new adapter (cx88[0]). DVB: registering frontend 0 (Zarlink MT352 DVB-T)... ACPI: PCI Interrupt 0000:05:01.2[A] -> GSI 19 (level, low) -> IRQ 177 cx88[1]/2: found at 0000:05:01.2, rev: 5, irq: 177, latency: 32, mmio: 0xec000000 cx88[1]/2: cx2388x based dvb card DVB: registering new adapter (cx88[1]). DVB: registering frontend 1 (Zarlink MT352 DVB-T)... ... lsmod: ... cx88_dvb 18948 0 cx8802 17284 1 cx88_dvb cx88_vp3054_i2c 9088 1 cx88_dvb mt352 11140 1 cx88_dvb dvb_pll 19076 1 cx88_dvb or51132 14468 1 cx88_dvb video_buf_dvb 11012 1 cx88_dvb nxt200x 17924 1 cx88_dvb isl6421 6912 1 cx88_dvb cx8800 38540 0 cx88xx 65700 3 cx88_dvb,cx8802,cx8800 ir_common 32516 1 cx88xx zl10353 9988 1 cx88_dvb cx24123 16520 1 cx88_dvb lgdt330x 12700 1 cx88_dvb cx22702 10756 1 cx88_dvb i2c_algo_bit 13192 2 cx88_vp3054_i2c,cx88xx video_buf 29188 5 cx88_dvb,cx8802,video_buf_dvb,cx8800,cx88xx tveeprom 18960 1 cx88xx compat_ioctl32 5760 1 cx8800 btcx_risc 9480 3 cx8802,cx8800,cx88xx videodev 27392 2 cx8800,cx88xx v4l1_compat 16772 2 cx8800,videodev v4l2_common 26624 2 cx8800,videodev i2c_core 25984 14 cx88_dvb,mt352,dvb_pll,or51132,nxt200x,isl6421,cx88xx,zl10353,cx24123,lgdt33 0x,cx22702,i2c_algo_bit,tveeprom,i2c_i801 dvb_core 83624 1 video_buf_dvb ... 2.6.18-rc6 with linuxtv.org hg tip: cx2388x v4l2 driver version 0.0.6 loaded ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 20 (level, low) -> IRQ 58 CORE cx88[0]: subsystem: 18ac:db10, board: DViCO FusionHDTV DVB-T Plus [card=21,autodetected] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe cx2388x dvb driver version 0.0.6 loaded usb 7-1: new low speed USB device using uhci_hcd and address 2 PM: Adding info for No Bus:i2c-1 cx88[0]/0: found at 0000:05:00.0, rev: 5, irq: 58, latency: 32, mmio: 0xe9000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 177 CORE cx88[1]: subsystem: 18ac:db10, board: DViCO FusionHDTV DVB-T Plus [card=21,autodetected] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe PM: Adding info for usb:7-1 PM: Adding info for No Bus:usbdev7.2_ep00 usb 7-1: configuration #1 chosen from 1 choice PM: Adding info for usb:7-1:1.0 input: Logitech USB Receiver as /class/input/input1 input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-1 PM: Adding info for No Bus:usbdev7.2_ep81 PM: Adding info for usb:7-1:1.1 input: Logitech USB Receiver as /class/input/input2 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-1 PM: Adding info for No Bus:usbdev7.2_ep82 PM: Adding info for No Bus:i2c-2 cx88[1]/0: found at 0000:05:01.0, rev: 5, irq: 177, latency: 32, mmio: 0xeb000000 cx88[1]/0: registered device video1 [v4l2] cx88[1]/0: registered device vbi1 ACPI: PCI Interrupt 0000:05:00.2[A] -> GSI 20 (level, low) -> IRQ 58 cx88[0]/2: found at 0000:05:00.2, rev: 5, irq: 58, latency: 32, mmio: 0xea000000 cx88[0]/2: cx2388x based dvb card ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:00:1b.0 to 64 DVB: registering new adapter (cx88[0]). DVB: registering frontend 0 (Zarlink MT352 DVB-T)... ACPI: PCI Interrupt 0000:05:01.2[A] -> GSI 19 (level, low) -> IRQ 177 cx88[1]/2: found at 0000:05:01.2, rev: 5, irq: 177, latency: 32, mmio: 0xec000000 cx88[1]/2: cx2388x based dvb card DVB: registering new adapter (cx88[1]). DVB: registering frontend 1 (Zarlink MT352 DVB-T)... cx2388x blackbird driver version 0.0.6 loaded ... lsmod: ... cx88_blackbird 22404 0 cx2341x 15236 1 cx88_blackbird cx88_dvb 20868 2 cx8802 16772 2 cx88_blackbird,cx88_dvb cx8800 38028 1 cx88_blackbird cx88_vp3054_i2c 8704 1 cx88_dvb dvb_pll 18692 3 cx88_dvb cx88xx 66340 4 cx88_blackbird,cx88_dvb,cx8802,cx8800 ir_common 32772 1 cx88xx i2c_algo_bit 13192 2 cx88_vp3054_i2c,cx88xx video_buf_dvb 10756 1 cx88_dvb video_buf 28804 6 cx88_blackbird,cx88_dvb,cx8802,cx8800,cx88xx,video_buf_dvb tveeprom 18448 1 cx88xx compat_ioctl32 5504 1 cx8800 btcx_risc 9096 3 cx8802,cx8800,cx88xx videodev 26880 3 cx88_blackbird,cx8800,cx88xx v4l1_compat 16388 2 cx8800,videodev v4l2_common 26112 4 cx88_blackbird,cx2341x,cx8800,videodev i2c_core 25984 8 mt352,cx88_dvb,dvb_pll,cx88xx,i2c_algo_bit,nvidia,tveeprom,i2c_i801 mt352 10500 2 dvb_core 83240 1 video_buf_dvb ... Note that plain vanilla seems to load more modules than it requires. Perhaps the MT352 is conflicting with the ZL10353 (even though it reports it's using the MT352 frontend module). But that's a rough guess just by looking at the difference in the modules that were loaded. Hope that helps your diagnosis... Cheers, Richard. _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
