Am Freitag, 11. Mai 2007 11:09 schrieb Andreas Nettsträter: > Hi, > > i have got a similar problem. I own a DVB-T Twinhan VisionPlus card and > it used to work properly under Debian. But for a few weeks the frontend > cannot be found or installed for this card. I am not able to get the card > back working. Here is the accordingly dmesg output, I am using a 2.6.18 > kernel with debian testing: > > Linux video capture interface: v2.00 > bttv: driver version 0.9.16 loaded > bttv: using 8 buffers with 2080k (520 pages) each for capture > bttv: Bt8xx card found (0). > PCI: setting IRQ 14 as level-triggered > PCI: Found IRQ 14 for device 0000:00:0a.0 > PCI: Sharing IRQ 14 with 0000:00:0a.1 > bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 14, latency: 64, mmio: > 0xeb005000 > bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is > 1822:0001 > bttv0: using: Twinhan DST + clones [card=113,autodetected] > bttv0: gpio: en=00000000, out=00000000 in=00fbcdfe [init] > bttv0: using tuner=4 > bttv0: add subdevice "dvb0" > input: i2c IR (Hauppauge) as /class/input/input0 > ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-0/0-001a/ir0 [bt878 #0 > [hw]] cx2388x v4l2 driver version 0.0.6 loaded > bt878: AUDIO driver version 0.0.0 loaded > bt878: Bt878 AUDIO function found (0). > PCI: Found IRQ 14 for device 0000:00:0a.1 > PCI: Sharing IRQ 14 with 0000:00:0a.0 > bt878_probe: card id=[0x11822],[ Twinhan VisionPlus DVB ] has DVB > functions. > bt878(0): Bt878 (rev 17) at 00:0a.1, irq: 14, latency: 64, memory: > 0xeb006000 > DVB: registering new adapter (bttv0). > dst(0) dst_probe: unknown device. > frontend_init: Could not find a Twinhan DST. > dvb-bt8xx: A frontend driver was not found for device 109e/0878 subsystem > 1822/0001 > > I think the problems are connected, but i cannot give you a solution. > > Bye > Andi >
Hi Andi, a. This line appears strange to me: > [hw]] cx2388x v4l2 driver version 0.0.6 loaded Do think you can reload it without? b. The DST cards do not need a "frontend", they need module dst.ko, and if there is a conditional access slot they need dst_ca.ko. If that does not help it wuold be neccessary to reload one or both dst modules (after unloading them of course) with verbose=4, then send in the dmesg file. Cheers Uwe > _______________________________________________ > linux-dvb mailing list > linux-dvb@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
