This patch synchronizes the documentation for bt8xx cards to the current state
of kernel 2.6.22-rc1. It does not touch the outstanding DST problem, although
it helps.
Applies against: linux-2.6.22-rc1
Signed-off-by: Uwe Bugla <[EMAIL PROTECTED]>
--- a/Documentation/dvb/bt8xx.txt
+++ b/Documentation/dvb/bt8xx.txt
@@ -9,19 +9,27 @@
Please see Documentation/dvb/cards.txt => o Cards based on the Conexant Bt8xx
PCI bridge:
Compiling kernel please enable:
-a.)"Device drivers" => "Multimedia devices" => "Video For Linux" => "BT848
Video For Linux"
+a.)"Device drivers" => "Multimedia devices" => "Video For Linux" => "Enable
Video for Linux API 1 (DEPRECATED)"
-b.)"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting
Devices"
- => "DVB for Linux" "DVB Core Support" "Bt8xx based PCI Cards"
+b.)"Device drivers" => "Multimedia devices" => "Video For Linux" => "Video
Capture Adapters" => "BT848 Video For Linux"
+c.)"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting
Devices" => "DVB for Linux" "DVB Core Support" "Bt8xx based PCI Cards"
+
+Please use the following options with care as deselection of drivers which are
in fact necessary
+may result in DVB devices that cannot be tuned due to lack of driver support:
+You can save RAM by deselecting every frontend module that your DVB card does
not need.
+
+First please remove the static dependency of DVB card drivers on all frontend
modules for all possible card variants by enabling:
+d.) "Device drivers" => "Multimedia devices" => "Digital Video Broadcasting
Devices"
+ => "DVB for Linux" "DVB Core Support" "Load and attach frontend modules as
needed"
+
+If you know the frontend driver that your card needs please enable:
+e.)"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting
Devices"
+ => "DVB for Linux" "DVB Core Support" "Customise DVB Frontends" => "Customise
the frontend modules to build"
+ Then please select your card-specific frontend module.
2) Loading Modules
==================
-In default cases bttv is loaded automatically.
-To load the backend either place dvb-bt8xx in etc/modules, or apply manually:
-
- $ modprobe dvb-bt8xx
-
-All frontends will be loaded automatically.
+If the bttv driver detects a bt8xx-based DVB card, all frontend and backend
modules will be loaded automatically.
People running udev please see Documentation/dvb/udev.txt.
In the following cases overriding the PCI type detection for dvb-bt8xx might
be necessary:
@@ -30,7 +38,6 @@
------------------------------
$ modprobe bttv card=113
- $ modprobe dvb-bt8xx
$ modprobe dst
Useful parameters for verbosity level and debugging the dst module:
@@ -65,10 +72,9 @@
Notice: The order of the card ID should be uprising:
Example:
$ modprobe bttv card=113 card=135
- $ modprobe dvb-bt8xx
For a full list of card ID's please see
Documentation/video4linux/CARDLIST.bttv.
-In case of further problems send questions to the mailing list:
www.linuxdvb.org.
+In case of further problems please subscribe and send questions to the mailing
list: [EMAIL PROTECTED]
Authors: Richard Walker,
Jamie Honan,
--
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
