On Wednesday 24 October 2007 01:42, [EMAIL PROTECTED] wrote: > > at this point the results are the same (meter lights up but not much else) > so I can't say if this is better or worse at this point > although I've noticed the LED is staying at orange when it should be going > green in both cases, which suggests the GPIO register isn't being set when it > should > You can change the GPIO1 initialisation to 0x02 instead of 0x82. this will switch the led to green when the frontend gets open()'ed. To switch it back to orange insert stb0899_write_reg(state, STB0899_GPIO01CFG, 0x82); in the stb0899_sleep() function. (this should be somehow limited to the pctv452e as the GPIOs might have different meanings on other devices)
Dominik
pgpg3kmyC8iiz.pgp
Description: PGP signature
_______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
