Hello Kevin, On 11/8/07, kevin liu <[EMAIL PROTECTED]> wrote: > Dear everyone: > I wonder why v4l2 driver cancel all the urbs in VIDIOC_S_FMT and > then reinit all the urbs to submit. > VIDIOC_S_FMT only negotiate frame format with application like > mplayer and has nothing to do with our v4l2 driver.
there are several ways how you can deal with that, one way would be that you set up the framebuffers again for a different framesize using VIDIOC_S_FMT. While doing that setup the mode needs to be switched on the device depending on the device. When doing so you might bring it into an unstable state if you just change it while the isoc or bulk transfers are still running in the background. http://www.thedirks.org/v4l2/v4l2dev.htm "The size of the buffers often depends on the format of the data. For example, the size of capture buffers is determined by the capture image format set by the VIDIOC_S_FMT ioctl." Hope this clears up your questions, if not let me know. > And in my driver I follow the way most drivers have taken, but > when I use usb_submit_urb() in VIDIOC_S_FMT to submit all the urbs > successfully reinited, my Ubuntu crashes. Caps and Scroll flash during > my Ubuntu crashes. I can't get any value message from my syslog. > > Could somebody help me with this issue? > Thank you in advance! you very likely have a bad pointer in your driver, if you can publish the code somewhere someone could have a look. regards, Markus _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
