If someone is interested, or has already working an AF9015 + MT2060 stick... Here I attach some mails in reference. Regards, Rafael.
Antti Palosaari wrote: > > hi > > I just looked it more, because my device didnt attach (mt2060). Looks > > like there is much differences eg. endpoint configuration... > > I will check this more tonight. > Will be there on IRC in case. Regards, Manu > > br antti > > > > Manu Abraham wrote: > >> >> Antti Palosaari wrote: >> >>> >>> hello, >>> >>> I haven't looked driver so closely. I don't know how you implemented bus >>> >>> stuff, but when I did I added i2c_gate_ctrl to mt2060 and of course to >>> >>> af9015 driver too to get it working. There has not i2c-gate support in >>> >>> mt2060 currently. >>> >> >> >> >> Ahh... >> >> >> >> I haven't had looked at MT2060 module separately. Lo there it lies in >> >> there. :-( >> >> >> >> Regards, >> >> Manu >> >> >> >> >> >>> >>> regards antti >>> >>> >>> >>> Manu Abraham wrote: >>> >>>> >>>> Rafael Antoniello wrote: >>>> >>>>> >>>>> Hello. >>>>> >>>>> I have found some problems when attaching MT2060: I2c access to >>>>> >>>>> MT2060 >>>>> >>>>> tuner is not working at all in my case. >>>>> >>>>> Please consider the following: >>>>> >>>>> 1) In mt2060.c source, i2c_gate_control() function calls have to be >>>>> >>>>> added (¿?) >>>>> >>>> >>>> i2c_gate_ctrl is implemented in the demodulator code. >>>> >>>> >>>> >>>>> >>>>> 2) In af9015_i2c.c source, it is unclear for me if >>>>> >>>>> af9015_read/write_mux1_regs() functions are accordingly written for >>>>> >>>>> mt2060 (¿?) >>>>> >>>> >>>> >>>> >>>> Will take a look in there. Anything specific that you see ? >>>> >>>> >>>> >>>> Antti, >>>> >>>> anything that you see wrong in there ? >>>> >>>> >>>> >>>>> >>>>> Any feedback in reference to these points are welcome. >>>>> >>>>> Cheers, Rafael. >>>>> >>>>> >>>>> >>>> >>>> Regards, >>>> >>>> Manu >>>> >>>> >>>> >>>>> >>>>> Manu Abraham escribió: >>>>> >>>>>> >>>>>> Rafael Antoniello wrote: >>>>>> >>>>>> >>>>>> >>>>>>> >>>>>>> Hello. >>>>>>> >>>>>>> I am performing some tests with the given driver. Concretely, I >>>>>>> >>>>>>> am >>>>>>> >>>>>>> playing with a BestBuy Easy TV stick, which comes with an af9015 >>>>>>> >>>>>>> demodulator an a MT2061 tuner. >>>>>>> >>>>>>> I am trying to attach an MT2060 tuner following other drivers >>>>>>> >>>>>>> code; >>>>>>> >>>>>>> but >>>>>>> >>>>>>> it results quite difficult without any chip data-sheet. Can you >>>>>>> >>>>>>> give me >>>>>>> >>>>>>> any pointers to easy this task? >>>>>>> >>>>>>> Are you expecting to attach MT206x in the short-term? >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> Please take a look at the changes in this tree: >>>>>> >>>>>> http://jusst.de/hg/af901x >>>>>> >>>>>> >>>>>> >>>>>> There is very much preliminary support, you will need to add in >>>>>> >>>>>> your >>>>>> >>>>>> device id's in af9015_biu.c as well. >>>>>> >>>>>> >>>>>> >>>>>> Please note that it is very much preliminary and untested. Please >>>>>> >>>>>> don't start complaining that my device doesn't work etc. It _is_ >>>>>> >>>>>> untested and might be quite >>>>>> >>>>>> buggy. >>>>>> >>>>>> >>>>>> >>>>>> But please do not hesitate to test and provide feed back etc, >>>>>> >>>>>> eventhough the state. >>>>>> >>>>>> >>>>>> >>>>>> Manu >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>> >>> >>> >> >> >> > > > > > _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
