Hi Hans, you where faster than me... I don't understand what you did with the firmware. I just extracted the xc3028-v27.fw from the win driver as commented in other threads. Then I added my card (pinnacle 320cx) to your patch with some mid-successfully results, this is the dmesg;
[ 8067.028000] usb 1-1: new high speed USB device using ehci_hcd and address 4 [ 8067.160000] usb 1-1: configuration #1 chosen from 1 choice [ 8067.160000] dvb-usb: found a 'Pinnacle Expresscard 320cx' in cold state, will try to load a firmware [ 8067.164000] dvb-usb: downloading firmware from file ' dvb-usb-dib0700-1.10.fw' [ 8067.360000] dib0700: firmware started successfully. [ 8067.864000] dvb-usb: found a 'Pinnacle Expresscard 320cx' in warm state. [ 8067.864000] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 8067.864000] DVB: registering new adapter (Pinnacle Expresscard 320cx) [ 8068.236000] DVB: registering frontend 0 (DiBcom 7000PC)... [ 8068.236000] xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner [ 8068.236000] input: IR-receiver inside an USB DVB receiver as /class/input/input13 [ 8068.236000] dvb-usb: schedule remote query interval to 150 msecs. [ 8068.236000] dvb-usb: Pinnacle Expresscard 320cx successfully initialized and connected. But when I start kaffeine i got this error; [ 8144.084000] xc2028 4-0061: Error on line 1063: -5 And when I try to scan I get more errors; [ 8176.032000] xc2028 4-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 8176.032000] dib0700: stk7700ph_xc3028_callback: XC2028_TUNER_RESET 0 [ 8176.032000] [ 8176.060000] xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. [ 8176.060000] dib0700: stk7700ph_xc3028_callback: XC2028_TUNER_RESET 0 [ 8176.060000] [ 8182.548000] xc2028 4-0061: Loading firmware for type=D2620 DTV8 (208), id 0000000000000000. [ 8182.668000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 [ 8182.688000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1 [ 8182.688000] [ 8184.364000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 [ 8184.384000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1 Any idea? is this related to the firmware?? Albert
_______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
