> On 26/12/05, Michael Tautschnig <[EMAIL PROTECTED]> wrote: > > > > > > After a lot of time being debugged, I found out that it was problem > > > with Marvell Yukon 8053 Gigabit Ethernet. > > > Are you sure that your NIC has been detected by linux? I've got some of > > these > > too and it works without any problems using recent kernels; Do you see > > anything > > like: > > Hi Michael, > > By recent how recent do you mean? I have a number of these Marvell > Yukon NICS (onboard) on various ASUS boards and usually give up on > them for PXE and just put another GB NIC in... In may case it wasn't > worth the time to get it to work when I had a box of GB nics sitting > there, I just disabled them in the BIOS. >
In this case it was a 2.6.11.11, but I think it worked fine using 2.6.8 too. lspci tells me 0000:02:05.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 12) on an ASUS board. Do you see the dmesg-output I mentioned earlier? Or do you see eth0: 3Com Gigabit LOM (3C940) PrefPort:A RlmtMode:Check Link State ? If you do see that, but not the output posted before, the kernel is most likely trying to send DHCP requests to some firewire port... HTH, Michael
signature.asc
Description: Digital signature