Hello,
With FAI 3.2.19, I'm trying to install on a host with 3 identical hard
disks a system on Raid5 + LVM. But installation keeps failing in
task_partition, and I can't figure out where my setup-storage config is
wrong:
disk_config sda
primary - 512 - -
primary swap 1024 swap sw
primary - 0- - -
disk_config sdb
primary - 512 - -
primary - 1024 - -
primary - 0- - -
disk_config sdc
primary - 512 - -
primary - 1024 - -
primary - 0- - -
disk_config raid
raid5 /boot sda1,sdb1,sdc1 ext2 rw
raid5 - sda3,sdb3,sdc3 ext2 default
disk_config lvm
vg vg0 md1
vg0-root / 1024 ext3 rw
vg0-var /var 2048 ext3 rw
vg0-usr /usr 6144 ext3 rw
vg0-data /data 6144 ext3 rw
The error message is the following (full log is at
http://paste.debian.net/34215/)
Executing: /lib/udev/vol_id -u /dev/sda2
Command /lib/udev/vol_id -u /dev/sda2 had exit code 4
Failed to obtain UUID for /dev/sda2
I originally wanted to have one swap slice on each disk, but in this
case the error is on the sdb swap partition:
Executing: /lib/udev/vol_id -u /dev/sdb2
Command /lib/udev/vol_id -u /dev/sdb2 had exit code 4
Failed to obtain UUID for /dev/sdb2
Any clue?
--
Nicolas
