Ok, FYI, I think I have a working configuration with : ``` # example of new config file for setup-storage # # <type> <mountpoint> <size> <fs type> <mount options> <misc options>
disk_config disk1 disklabel:gpt fstabkey:uuid bootable:1 primary - 2G - - primary /boot/efi 1G vfat rw createopts="-F32" primary swap 2G swap sw,pri=1 primary - 0- - - #disk_config disk2 sameas:disk1 disk_config disk2 disklabel:gpt fstabkey:uuid primary - 2G - - primary /boot/efi2 1G vfat rw createopts="-F32" primary swap 2G swap sw,pri=1 primary - 0- - - disk_config raid fstabkey:uuid #raid1 /boot disk1.1,disk2.1 - - mdcreateopts="--verbose --metadata=1.0" createopts="-L boot" raid1 /boot disk1.1,disk2.1 vfat rw,noatime mdcreateopts="--verbose --metadata=0.90" raid1 - disk1.4,disk2.4 - - disk_config lvm fstabkey:uuid vg vg_system md1 vg_system-root / 60G-200G ext4 rw,noatime vg_system-tmp /tmp 20G-50G ext2 rw,noatime,nosuid,nodev ##vg_system-scratch /scratch 30%- ext2 rw,noatime vg_system-home /home 30%- ext4 rw,noatime,nosuid,nodev ``` My previous message was crystal clear. md0 did not have any formatted filesystem on it. So I added `vfat` option on /boot. Best regards, Rémy Le jeu. 30 nov. 2023 à 16:53, Rémy Dernat <remy...@gmail.com> a écrit : > > What is strange here, is that md1 is found, as well as md0, but > contrary to md0, md1 have an UUID ... > > However, UUID seems to be retrieve by blkid from /dev/disk/by-id, > where both md array have their own mdadm UUID, but only md1 have an > UUID from LVM (with pvdisplay / pvs ) ... > > > Le jeu. 30 nov. 2023 à 14:52, Rémy Dernat <remy...@gmail.com> a écrit : > > > > Hi Andrew, > > > > Indeed, this removed the syntax issue. However, I have a new error now: > > > > ``` > > /sbin/blkid -c /dev/null -s UUID -o value /dev/md0 had exit code 2 > > Command had non-zero exit code > > ``` > > Indeed, blkid is not able to found md0 UUID. > > > > I tried to modify the disk_config file to avoid this error, but I am > > still stuck with it. Here is what look like my disk_config file now: > > > > ``` > > # example of new config file for setup-storage > > # > > # <type> <mountpoint> <size> <fs type> <mount options> <misc options> > > > > disk_config disk1 > > primary - 2G - - > > primary /boot/efi 1G vfat rw createopts="-F32" > > primary swap 2G swap sw,pri=1 > > primary - 0- - - > > > > #disk_config disk2 sameas:disk1 > > disk_config disk2 disklabel:gpt fstabkey:uuid > > primary - 2G - - > > primary /boot/efi2 1G vfat rw createopts="-F32" > > primary swap 2G swap sw,pri=1 > > primary - 0- - - > > > > disk_config raid fstabkey:uuid > > raid1 /boot disk1.1,disk2.1 - - mdcreateopts="--verbose > > --metadata=0.90" createopts="-L boot" > > raid1 - disk1.4,disk2.4 - - > > > > disk_config lvm fstabkey:uuid > > vg vg_system md1 > > vg_system-root / 60G-200G ext4 rw,noatime > > vg_system-tmp /tmp 20G-50G ext2 rw,noatime,nosuid,nodev > > ##vg_system-scratch /scratch 30%- ext2 rw,noatime > > vg_system-home /home 30%- ext4 rw,noatime,nosuid,nodev > > ``` > > > > I also tried to change the raid metadata to 1.0, but that did not > > change anything. I wrote back ` fstabkey:uuid` behind disk_config raid > > because it does not fail with syntax error. > > > > Thanks for help > > > > Le jeu. 30 nov. 2023 à 11:55, Andrew Ruthven <and...@etc.gen.nz> a écrit : > > > > > > Hey, > > > > > > On Thu, 2023-11-30 at 11:14 +0100, Rémy Dernat wrote: > > > > Hi awesome Fai guys, > > > > > > > > I have a weird syntax issue with the following disk_config: > > > > > > > [snip] > > > > disk_config raid disklabel:gpt fstabkey:uuid bootable:1 > > > > > > This line is your problem, remove everything after the word raid. So it > > > should just be: > > > > > > disk_config raid > > > > > > Cheers, > > > Andrew > > > -- > > > Andrew Ruthven, Wellington, New Zealand > > > and...@etc.gen.nz | > > > Catalyst Cloud: | This space intentionally left blank > > > https://catalystcloud.nz | > > >
