On 12/01/2010 03:52 PM, Raoul Bhatia [IPAX] wrote: > hi, > > i have a cluster with an internal ip address and several clustered > public service ips. > e.g. > >> interface ip address >> eth0 192.168.1.100/24 = internal management/cluster ip >> eth0.12 a.b.c.d/24 = service ip > > to make the public ip reachable, i use: > > >> /sbin/ip rule add from a.b.c.0/24 table 12 >> /sbin/ip route add default dev eth0 via a.b.c.1 table 12 > > if i issue this by hand, it works perfectly fine. > > right now, i'm using something like this for the second part: >> primitive dbiproute ocf:heartbeat:Route \ >> params device="eth0.1112" gateway="93.189.24.193" table="12" >> destination="default" \ >> op monitor interval="10" > > > what i'm thinking about: > > 1. issue "/sbin/ip rule add from a.b.c.0/24 table 12" upon > reboot/firewall setup (my current solution); or > 2. create ocf:heartbeat:Iprule - similar to ocf:heartbeat:Route; or > 3. adapt ocf:heartbeat:Route to handle the rule. > > what would you guys do?
anyone? thanks, raoul -- ____________________________________________________________________ DI (FH) Raoul Bhatia M.Sc. email. [email protected] Technischer Leiter IPAX - Aloy Bhatia Hava OG web. http://www.ipax.at Barawitzkagasse 10/2/2/11 email. [email protected] 1190 Wien tel. +43 1 3670030 FN 277995t HG Wien fax. +43 1 3670030 15 ____________________________________________________________________ _______________________________________________________ Linux-HA-Dev: [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha-dev Home Page: http://linux-ha.org/
