Hi Dejan, > Agreed. I think that this should be fixed. Florian? Looks like > you'll have to move setting defaults after the validation > process.
Thank you for comment. The position of the set of the default seems to be a problem as you pointed it out. Florian : How do you think? Best Regards, Hideo Yamauchi. --- Dejan Muhamedagic <[email protected]> wrote: > Hi, > > On Mon, Dec 27, 2010 at 02:17:50PM +0900, [email protected] wrote: > > Hi Florian, > > > > I may have misunderstood the indication of your beginning. > > > > Was the answer of your beginning the meaning that the problem solved if I > > set a portals > parameter? > > > > example) > > primitive prmiSCSITarget ocf:heartbeat:iSCSITarget \ > > params iqn="iqn.2001-04.com.example:Test01" tid="1" portals="" \ > > ---> set blank. > > op start interval="0s" timeout="60s" on-fail="restart" \ > > op monitor interval="60s" timeout="60s" on-fail="restart" \ > > op stop interval="0s" timeout="60s" on-fail="fence" > > > > The intention of the problem is different if so. > > > > When it is a problem to get log when a user does not set a portals > > parameter, I want to say a > thing. > > > > Because the user understands it if the portals parameter is unnecessary. > > > > I think that it causes confusion to set an unnecessary portals parameter in > > a blank. > > Agreed. I think that this should be fixed. Florian? Looks like > you'll have to move setting defaults after the validation > process. > > Thanks, > > Dejan > > > > Best Regards, > > Hideo Yamauchi. > > > > > > --- [email protected] wrote: > > > > > Hi Florial, > > > > > > > > I think these warning log to be good only in probe or validate-all. > > > > > > > > I disagree. I think it's actually a good idea to warn users very noisily > > > > that they are expecting functionality from the resource that the agent > > > > cannot support. > > > > > > I agree that warning log appears when a "portals" parameter was appointed > > > in the case of > > > iet,tgt. > > > However, I do not appoint the "portals" parameter. > > > > > > There seems to be the problem to the default of the "portals" parameter. > > > When a "portals" parameter is not appointed in the case of iet,tgt, > > > iSCSITarget must not set > a > > > default. > > > > > > # Listen on 0.0.0.0:3260 by default > > > OCF_RESKEY_portals_default="0.0.0.0:3260" > > > : ${OCF_RESKEY_portals=${OCF_RESKEY_portals_default}} > > > > > > > > > > > > > > Or do you have a configuration where portals is actually _not_ set on > > > > the resource, and it's still complaining? Can I see your "crm configure > > > > show" please? > > > > > > [root@srv01 ~]# crm configure show > > > INFO: building help index > > > INFO: object rsc_defaults-meta_attributes cannot be represented in the > > > CLI notation > > > node $id="a5704d58-e5a1-453e-96d0-417026504519" srv02 > > > node $id="cdf7616d-77a7-408b-aa2c-cb06b9bbc62d" srv01 > > > primitive clnPrmPingd ocf:pacemaker:pingd \ > > > meta migration-threshold="10" \ > > > params name="default_ping_set" host_list="192.168.40.1" > > > multiplier="100" dampen="0" > \ > > > op start interval="0" timeout="60s" on-fail="restart" \ > > > op monitor interval="10s" timeout="60s" on-fail="restart" \ > > > op stop interval="0" timeout="60s" on-fail="ignore" > > > primitive prmDiskd1 ocf:pacemaker:diskd \ > > > params name="diskcheck_status_internal" device="/dev/sdc" > > > interval="10" \ > > > op start interval="0s" timeout="60s" on-fail="restart" \ > > > op monitor interval="10s" timeout="60s" on-fail="restart" \ > > > op stop interval="0s" timeout="60s" on-fail="ignore" > > > primitive prmDrbd ocf:linbit:drbd \ > > > params drbd_resource="r0" \ > > > op start interval="0" timeout="240s" on-fail="restart" \ > > > op monitor interval="10" role="Master" timeout="60s" > > > on-fail="restart" \ > > > op monitor interval="15" role="Slave" timeout="61s" > > > on-fail="restart" \ > > > op stop interval="0" timeout="100s" on-fail="fence" > > > primitive prmIpiSCSI ocf:heartbeat:IPaddr2 \ > > > params ip="192.168.40.77" nic="eth0" cidr_netmask="24" \ > > > op start interval="0s" timeout="60s" on-fail="restart" \ > > > op monitor interval="10s" timeout="60s" on-fail="restart" \ > > > op stop interval="0s" timeout="60s" on-fail="fence" > > > primitive prmStonithN1 stonith:external/ssh \ > > > params priority="1" stonith-timeout="60s" hostlist="srv01" \ > > > op start interval="0" timeout="60s" \ > > > op monitor interval="10s" timeout="60s" \ > > > op stop interval="0" timeout="60s" > > > primitive prmStonithN2 stonith:external/ssh \ > > > params priority="1" stonith-timeout="300s" hostlist="srv02" \ > > > op start interval="0" timeout="60s" \ > > > op monitor interval="10s" timeout="60s" \ > > > op stop interval="0" timeout="60s" > > > primitive prmiSCSILogicalUnit ocf:heartbeat:iSCSILogicalUnit \ > > > params lun="1" path="/dev/drbd0" > > > target_iqn="iqn.2001-04.com.example:Test01" \ > > > op start interval="0s" timeout="60s" on-fail="restart" \ > > > op monitor interval="60s" timeout="60s" on-fail="restart" \ > > > op stop interval="0s" timeout="60s" on-fail="fence" > > > primitive prmiSCSITarget ocf:heartbeat:iSCSITarget \ > > > params iqn="iqn.2001-04.com.example:Test01" tid="1" \ > > > op start interval="0s" timeout="60s" on-fail="restart" \ > > > op monitor interval="60s" timeout="60s" on-fail="restart" \ > > > op stop interval="0s" timeout="60s" on-fail="fence" > > > group grpStonith1 prmStonithN1 > > > group grpStonith2 prmStonithN2 > > > group iSCSIgroup01 prmIpiSCSI prmiSCSITarget prmiSCSILogicalUnit > > > ms msGroup01 prmDrbd \ > > > meta globally-unique="false" master-max="1" master-node-max="1" > > > clone-max="2" > > > clone-node-max="1" notify="true" > > > clone clnDiskd1 prmDiskd1 > > > clone clnPingd clnPrmPingd > > > location grpStonith1-1-location grpStonith1 \ > > > rule $id="rule-Stonith1-1" -inf: #uname eq srv01 > > > location grpStonith2-1-location grpStonith2 \ > > > rule $id="rule-Stonith2-1" -inf: #uname eq srv02 > > > location location-grp01-1 msGroup01 \ > > > rule $id="rule-grp01-1" 200: #uname eq srv01 \ > > > rule $id="rule-grp01-4" 100: #uname eq srv02 \ > > > rule $id="rule-grp01-2" -inf: not_defined default_ping_set or > > > default_ping_set lt > 100 \ > > > rule $id="rule-grp01-3" -inf: not_defined > > > diskcheck_status_internal or > > > diskcheck_status_internal eq ERROR > > > colocation rsc_colocation01 inf: iSCSIgroup01 msGroup01:Master > > > colocation rsc_colocation02 inf: msGroup01:Master clnPingd > > > colocation rsc_colocation03 inf: msGroup01 clnDiskd1 > > > order order-1 0: clnDiskd1 msGroup01 > > > order order-2 0: clnPingd msGroup01 > > > order order-3 0: msGroup01:promote iSCSIgroup01:start > > > property $id="cib-bootstrap-options" \ > > > dc-version="1.0.10-b2e39d318fda501e2fcf223c2d039b721f3679a9" \ > > > cluster-infrastructure="Heartbeat" \ > > > no-quorum-policy="ignore" \ > > > stonith-enabled="true" \ > > > startup-fencing="false" \ > > > stonith-timeout="120s" \ > > > dc-deadtime="48s" > > > xml <meta_attributes id="rsc_defaults-meta_attributes"> \ > > > <nvpair id="rsc-default-meta_attributes-resource-stickiness" > name="resource-stickiness" > > > value="INFINITY"/> \ > > > <nvpair id="rsc-default-meta_attributes-migration-threshold" > name="migration-threshold" > > > value="1"/> \ > > > </meta_attributes> > > > > > > > > > Best Regards, > > > Hideo Yamauchi. > > > > > > --- Florian Haas <[email protected]> wrote: > > > > > > > On 12/17/2010 07:22 AM, [email protected] wrote: > > > > > Hi All, > > > > > > > > > > We test the iSCSI environment. > > > > > > > > > > And I confirmed the log of the noise that was output every time when > > > > > a monitor was > carried > > > out > > > > in the > > > > > environment that used tgt. > > > > > > > > > > Dec 15 16:42:32 srv02 iSCSITarget[5601]: WARNING: Configuration > > > > > parameter "portals" is > not > > > > supported > > > > > by the iSCSI implementation and will be ignored. > > > > > Dec 15 16:43:34 srv02 iSCSITarget[6023]: WARNING: Configuration > > > > > parameter "portals" is > not > > > > supported > > > > > by the iSCSI implementation and will be ignored. > > > > > Dec 15 16:44:37 srv02 iSCSITarget[6473]: WARNING: Configuration > > > > > parameter "portals" is > not > > > > supported > > > > > by the iSCSI implementation and will be ignored. > > > > > Dec 15 16:45:39 srv02 iSCSITarget[6923]: WARNING: Configuration > > > > > parameter "portals" is > not > > > > supported > > > > > by the iSCSI implementation and will be ignored. > > > > > Dec 15 16:46:41 srv02 iSCSITarget[7373]: WARNING: Configuration > > > > > parameter "portals" is > not > > > > supported > > > > > by the iSCSI implementation and will be ignored. > > > > > > > > > > I think these warning log to be good only in probe or validate-all. > > > > > > > > I disagree. I think it's actually a good idea to warn users very noisily > > > > that they are expecting functionality from the resource that the agent > > > > cannot support. > > > > > > > > Or do you have a configuration where portals is actually _not_ set on > > > > the resource, and it's still complaining? Can I see your "crm configure > > > > show" please? > > > > > > > > Florian > > > > > > > > > _______________________________________________________ > > > > Linux-HA-Dev: [email protected] > > > > http://lists.linux-ha.org/mailman/listinfo/linux-ha-dev > > > > Home Page: http://linux-ha.org/ > > > > > > > > > > _______________________________________________________ > > > Linux-HA-Dev: [email protected] > > > http://lists.linux-ha.org/mailman/listinfo/linux-ha-dev > > > Home Page: http://linux-ha.org/ > > > > > > > _______________________________________________________ > > Linux-HA-Dev: [email protected] > > http://lists.linux-ha.org/mailman/listinfo/linux-ha-dev > > Home Page: http://linux-ha.org/ > _______________________________________________________ > Linux-HA-Dev: [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha-dev > Home Page: http://linux-ha.org/ > _______________________________________________________ Linux-HA-Dev: [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha-dev Home Page: http://linux-ha.org/
