On Wed, 7 Sep 2005, Tejun Heo wrote:
Hello, Alexander & Jeremy.
Alexander Shaposhnikov wrote:
Hellow Tejun
I tried your patch (by the way, it cannot be applied by patch utility -it
complains about malformed expression on line 19 and so on)
Default reads in 500mv. With 600mv, I am starting to get CRC errors for
Seagate drive (no errors with 2.6.13-git4). Samsung drive produces so many
errors, that it is unusable both with and without patch.
Ugh... that's ugly. :-/
Jeremy, apparantly my little patch doesn't do any good. Please ignore it.
Concerning K8N-DL motherboard -current BIOS 1004 is very buggy. It has
screwed up ACPI APIC table. To use onboard lan and usb, I have to boot with
pci=noacpi boot option. And I cannot use 1003, as I have DualCore Opterons,
and 1004 the only one which supports them!
I fear that there's nothing much else I can do about this K8N-DL sil CRC
error. I've read the hw doc but couldn't find anything which seems helpful.
Let's hope something (BIOS update?) comes up soon.
Well, myself I think I'm going to be getting a known-good hardware RAID
controller (probably the 3ware) for this board. I'm getting the lockups
after 1-3 hours, and that's not enough uptime for me. Kinda sucks to have
two SATA chips onboard and problems with both of them. If there are any
thoughts or patches you folks have, I'm happy to try them out.
Jer
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
