Hello. Michael Bueker wrote:
Then it's probably the same issue as here:
http://bugzilla.kernel.org/show_bug.cgi?id=7703
What's really strange is that my HPT370 is working fine. However, the chip marking says it's HPT370A despite the revision ID is 3 (which should correspond to HPT370)...
Unfortunately, I'm unable to compile a 2.4.18 kernel (my gcc is probably too new) for testing.
But anyways - do you think there's hope for fixing this? If I can provide you with any more helpful information, please tell me.
Hope dies last. :-) Unfortunately, I don't have enough time to work on this, and the fact that it's not locally reproducible also doesn't help. I'll try to come up with something to test but not very soon...
My controller is:
http://www.michael-bueker.de/files/hpt370/
01:09.0 Mass storage controller: Triones Technologies, Inc. HPT366/368/370/370A/372/372N (rev 03) Subsystem: Triones Technologies, Inc. HPT370 UDMA100 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=mediumTAbort- <TAbort- <MAbort- >SERR- <PERR-Latency: 120 (2000ns min, 2000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 9000 [size=8] Region 1: I/O ports at 9400 [size=4] Region 2: I/O ports at 9800 [size=8] Region 3: I/O ports at 9c00 [size=4] Region 4: I/O ports at a000 [size=256] Expansion ROM at da020000 [disabled] [size=128K]
Exactly what I have here but the chip marking is HPT370A. A bit puzzling...
~Mik
WBR, Sergei - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
