[PATCH] cs5530: small cleanup

* BUG() on unknown DMA mode in cs5530_config_dma()
* there is no need to call hwif->ide_dma_host_{off,on}() in
  cs5530_config_dma() because hwif->ide_dma_host_{off,on}()
  is called by hwif->ide_dma_off_{quietly,on}()

Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>

---
 drivers/ide/pci/cs5530.c |   12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

Index: a/drivers/ide/pci/cs5530.c
===================================================================
--- a.orig/drivers/ide/pci/cs5530.c
+++ a/drivers/ide/pci/cs5530.c
@@ -103,16 +103,13 @@ static int cs5530_config_dma (ide_drive_
        int                     unit = drive->select.b.unit;
        ide_drive_t             *mate = &hwif->drives[unit^1];
        struct hd_driveid       *id = drive->id;
-       unsigned int            reg, timings;
+       unsigned int            reg, timings = 0;
        unsigned long           basereg;
 
        /*
         * Default to DMA-off in case we run into trouble here.
         */
        hwif->ide_dma_off_quietly(drive);
-       /* turn off DMA while we fiddle */
-       hwif->ide_dma_host_off(drive);
-       /* clear DMA_capable bit */
 
        /*
         * The CS5530 specifies that two drives sharing a cable cannot
@@ -182,9 +179,8 @@ static int cs5530_config_dma (ide_drive_
                case XFER_MW_DMA_1:     timings = 0x00012121; break;
                case XFER_MW_DMA_2:     timings = 0x00002020; break;
                default:
-                       printk(KERN_ERR "%s: cs5530_config_dma: huh? 
mode=%02x\n",
-                               drive->name, mode);
-                       return 1;       /* failure */
+                       BUG();
+                       break;
        }
        basereg = CS5530_BASEREG(hwif);
        reg = hwif->INL(basereg+4);             /* get drive0 config register */
@@ -199,8 +195,6 @@ static int cs5530_config_dma (ide_drive_
                hwif->OUTL(reg,     basereg+4); /* write drive0 config register 
*/
                hwif->OUTL(timings, basereg+12);        /* write drive1 config 
register */
        }
-       (void) hwif->ide_dma_host_on(drive);
-       /* set DMA_capable bit */
 
        /*
         * Finally, turn DMA on in software, and exit.
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to