For all JMicrons except for 361 and 368, AHCI mode enable bits in the
Control(1) should be set. This used to be done in both ahci and
pata_jmicron but while moving programming to PCI quirk, it was removed
from ahci part while still left in pata_jmicron.
The implemented JMicron PCI quirk was incorrect in that it didn't
program AHCI mode enable bits. If pata_jmicron is loaded first and
programs those bits, the ahci ports work; otherwise, ahci device
detection fails miserably.
This patch makes JMicron PCI quirk clear SATA IDE mode bits and set
AHCI mode bits and remove the respective part from pata_jmicron.
Tested on JMB361, 363 and 368.
Signed-off-by: Tejun Heo <[EMAIL PROTECTED]>
---
Jeff, gotta be included in 2.6.20.
Justin, is this the problem you were seeing on suse?
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 2d406a7..26365c1 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -202,20 +202,12 @@ static int jmicron_init_one (struct pci_dev *pdev, const
struct pci_device_id *i
u32 reg;
- if (id->driver_data != 368) {
- /* Put the controller into AHCI mode in case the AHCI driver
- has not yet been loaded. This can be done with either
- function present */
+ /* PATA controller is fn 1, AHCI is fn 0 */
+ if (id->driver_data != 368 && PCI_FUNC(pdev->devfn) != 1)
+ return -ENODEV;
- /* FIXME: We may want a way to override this in future */
- pci_write_config_byte(pdev, 0x41, 0xa1);
-
- /* PATA controller is fn 1, AHCI is fn 0 */
- if (PCI_FUNC(pdev->devfn) != 1)
- return -ENODEV;
- }
- if ( id->driver_data == 365 || id->driver_data == 366) {
- /* The 365/66 have two PATA channels, redirect the second */
+ /* The 365/66 have two PATA channels, redirect the second */
+ if (id->driver_data == 365 || id->driver_data == 366) {
pci_read_config_dword(pdev, 0x80, ®);
reg |= (1 << 24); /* IDE1 to PATA IDE secondary */
pci_write_config_dword(pdev, 0x80, reg);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 5c34379..6f3e1bf 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1260,8 +1260,8 @@ static void quirk_jmicron_dualfn(struct pci_dev *pdev)
pci_read_config_dword(pdev, 0x40, &conf);
/* Enable dual function mode, AHCI on fn 0, IDE fn1 */
/* Set the class codes correctly and then direct IDE 0
*/
- conf &= ~0x000F0200; /* Clear bit 9 and 16-19 */
- conf |= 0x00C20002; /* Set bit 1, 17, 22, 23 */
+ conf &= ~0x000FF200; /* Clear bit 9 and 12-19 */
+ conf |= 0x00C2A102; /* Set 1, 8, 13, 15, 17, 22, 23 */
pci_write_config_dword(pdev, 0x40, conf);
/* Reconfigure so that the PCI scanner discovers the
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
