On Wed, Feb 07, 2007 at 09:29:28AM -0500, Dailey, Nate wrote:
> The attached patch modifies drivers/ata/sata_vsc.c to only set the cache
> line size to 0x80 if the default value is zero. Apparently zero isn't
> allowed due to a bug in the chip, but I've found performance is much
> better with the (non-zero) default instead of 0x80.
>
> Signed-off-by: Nate Dailey <[EMAIL PROTECTED]>
Signed-off-by: Jeremy Higdon <[EMAIL PROTECTED]>
Here is the attachment from Nate, inline.
Content-Description: sata_vsc_CLS.patch
--- old/drivers/ata/sata_vsc.c 2007-02-04 13:44:54.000000000 -0500
+++ new/drivers/ata/sata_vsc.c 2007-02-07 09:13:17.000000000 -0500
@@ -345,6 +345,7 @@ static int __devinit vsc_sata_init_one (
int pci_dev_busy = 0;
void __iomem *mmio_base;
int rc;
+ u8 cls;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
@@ -394,9 +395,13 @@ static int __devinit vsc_sata_init_one (
base = (unsigned long) mmio_base;
/*
- * Due to a bug in the chip, the default cache line size can't be used
+ * Due to a bug in the chip, the default cache line size can't be
+ * used (unless the default is non-zero).
*/
- pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80);
+ pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cls);
+ if (cls == 0x00) {
+ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80);
+ }
probe_ent->sht = &vsc_sata_sht;
probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
