Mark Lord wrote:
> Albert Lee wrote:
>
>> Mark Lord wrote:
>> ..
>>
>>> I patched the above in, and it was NEVER hit.
>>
>>
>> Do you mean no "wait for DRQ" messages at all?
>> Is the HSM violation still seen?
>
>
> The code you sent me to patch in was never hit.
> The "wait for DRQ" message therefore never gets output.
> The exact same set of HSM violation messages still appear.
>
> Of course this makes perfect sense -- the HSM messages
> are not being generated in response to any command,
> but rather in response to ejecting a disk -- which I think
> causes the drive to generate an unsolicited event.
>
Hi Mark,
Could you please apply the attached debug patch (against 2.6.21-rc4).
(BTW, the zip 100 must be connected to ata4.)
Hopefully we could have more clue about the HSM violation.
--
thanks,
albert
diff -Nrup linux-2.6.21-rc4/drivers/ata/libata-core.c
linux-2.6.21-rc4-mod/drivers/ata/libata-core.c
--- linux-2.6.21-rc4/drivers/ata/libata-core.c 2007-03-16 08:20:01.000000000
+0800
+++ linux-2.6.21-rc4-mod/drivers/ata/libata-core.c 2007-03-20
18:04:15.000000000 +0800
@@ -4350,8 +4350,9 @@ int ata_hsm_move(struct ata_port *ap, st
WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc));
fsm_start:
- DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n",
- ap->print_id, qc->tf.protocol, ap->hsm_task_state, status);
+ if (ap->print_id == 4)
+ printk(KERN_ERR "ata%u: protocol %d task_state %d (dev_stat
0x%X)\n",
+ ap->print_id, qc->tf.protocol, ap->hsm_task_state,
status);
switch (ap->hsm_task_state) {
case HSM_ST_FIRST:
@@ -5071,8 +5072,14 @@ inline unsigned int ata_host_intr (struc
struct ata_eh_info *ehi = &ap->eh_info;
u8 status, host_stat = 0;
- VPRINTK("ata%u: protocol %d task_state %d\n",
- ap->print_id, qc->tf.protocol, ap->hsm_task_state);
+ if (ap->print_id == 4) {
+ printk(KERN_ERR "ata%u: protocol %d task_state %d\n",
+ ap->print_id, qc->tf.protocol, ap->hsm_task_state);
+
+ host_stat = ap->ops->bmdma_status(ap);
+ printk(KERN_ERR "ata%u: host_stat 0x%X\n", ap->print_id,
host_stat);
+ }
+
/* Check whether we are expecting interrupt in this state */
switch (ap->hsm_task_state) {
@@ -5118,11 +5125,17 @@ inline unsigned int ata_host_intr (struc
/* check altstatus */
status = ata_altstatus(ap);
+ if (ap->print_id == 4)
+ printk(KERN_ERR "ata%u: dev_altstatus 0x%X\n",
+ ap->print_id, status);
if (status & ATA_BUSY)
goto idle_irq;
/* check main status, clearing INTRQ */
status = ata_chk_status(ap);
+ if (ap->print_id == 4)
+ printk(KERN_ERR "ata%u: dev_status 0x%X\n",
+ ap->print_id, status);
if (unlikely(status & ATA_BUSY))
goto idle_irq;
diff -Nrup linux-2.6.21-rc4/drivers/ata/libata-scsi.c
linux-2.6.21-rc4-mod/drivers/ata/libata-scsi.c
--- linux-2.6.21-rc4/drivers/ata/libata-scsi.c 2007-03-16 08:20:01.000000000
+0800
+++ linux-2.6.21-rc4-mod/drivers/ata/libata-scsi.c 2007-03-20
18:05:38.000000000 +0800
@@ -2773,17 +2773,17 @@ static inline ata_xlat_func_t ata_get_xl
static inline void ata_scsi_dump_cdb(struct ata_port *ap,
struct scsi_cmnd *cmd)
{
-#ifdef ATA_DEBUG
struct scsi_device *scsidev = cmd->device;
u8 *scsicmd = cmd->cmnd;
- DPRINTK("CDB (%u:%d,%d,%d) %02x %02x %02x %02x %02x %02x %02x %02x
%02x\n",
- ap->print_id,
- scsidev->channel, scsidev->id, scsidev->lun,
- scsicmd[0], scsicmd[1], scsicmd[2], scsicmd[3],
- scsicmd[4], scsicmd[5], scsicmd[6], scsicmd[7],
- scsicmd[8]);
-#endif
+ if (ap->print_id == 4) {
+ printk(KERN_ERR "CDB (%u:%d,%d,%d) %02x %02x %02x %02x %02x
%02x %02x %02x %02x\n",
+ ap->print_id,
+ scsidev->channel, scsidev->id, scsidev->lun,
+ scsicmd[0], scsicmd[1], scsicmd[2], scsicmd[3],
+ scsicmd[4], scsicmd[5], scsicmd[6], scsicmd[7],
+ scsicmd[8]);
+ }
}
static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
