Reimplement suspend/resume support using sdev->manage_start_stop.
* Device suspend/resume is now SCSI layer's responsibility and the
code is simplified a lot.
* DPM is dropped. This also simplifies code a lot. Suspend/resume
status is port-wide now.
* ata_scsi_device_suspend/resume() and ata_dev_ready() removed.
* Resume now has to wait for disk to spin up before proceeding. I
couldn't find easy way out as libata is in EH waiting for the
disk to be ready and sd is waiting for EH to complete to issue
START_STOP.
* sdev->manage_start_stop is set to 1 in ata_scsi_slave_config().
This fixes spindown on shutdown and suspend-to-disk.
Signed-off-by: Tejun Heo <[EMAIL PROTECTED]>
---
drivers/ata/ahci.c | 4
drivers/ata/ata_generic.c | 6 -
drivers/ata/ata_piix.c | 4
drivers/ata/libata-core.c | 39 ------
drivers/ata/libata-eh.c | 237 ----------------------------------------
drivers/ata/libata-scsi.c | 129 ---------------------
drivers/ata/pata_ali.c | 4
drivers/ata/pata_amd.c | 4
drivers/ata/pata_atiixp.c | 4
drivers/ata/pata_cmd640.c | 2
drivers/ata/pata_cmd64x.c | 4
drivers/ata/pata_cs5520.c | 4
drivers/ata/pata_cs5530.c | 4
drivers/ata/pata_cs5535.c | 4
drivers/ata/pata_cypress.c | 4
drivers/ata/pata_efar.c | 4
drivers/ata/pata_hpt366.c | 4
drivers/ata/pata_hpt3x3.c | 4
drivers/ata/pata_it8213.c | 4
drivers/ata/pata_it821x.c | 4
drivers/ata/pata_ixp4xx_cf.c | 2
drivers/ata/pata_jmicron.c | 4
drivers/ata/pata_marvell.c | 4
drivers/ata/pata_mpc52xx.c | 4
drivers/ata/pata_mpiix.c | 4
drivers/ata/pata_netcell.c | 4
drivers/ata/pata_ns87410.c | 4
drivers/ata/pata_oldpiix.c | 4
drivers/ata/pata_opti.c | 4
drivers/ata/pata_optidma.c | 4
drivers/ata/pata_pdc202xx_old.c | 4
drivers/ata/pata_radisys.c | 4
drivers/ata/pata_rz1000.c | 6 -
drivers/ata/pata_sc1200.c | 4
drivers/ata/pata_scc.c | 4
drivers/ata/pata_serverworks.c | 4
drivers/ata/pata_sil680.c | 4
drivers/ata/pata_sis.c | 4
drivers/ata/pata_triflex.c | 4
drivers/ata/pata_via.c | 4
drivers/ata/sata_inic162x.c | 4
drivers/ata/sata_nv.c | 8 -
drivers/ata/sata_sil.c | 4
drivers/ata/sata_sil24.c | 4
include/linux/libata.h | 14 --
45 files changed, 14 insertions(+), 573 deletions(-)
Index: work/drivers/ata/ahci.c
===================================================================
--- work.orig/drivers/ata/ahci.c
+++ work/drivers/ata/ahci.c
@@ -243,10 +243,6 @@ static struct scsi_host_template ahci_sh
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static const struct ata_port_operations ahci_ops = {
Index: work/drivers/ata/ata_generic.c
===================================================================
--- work.orig/drivers/ata/ata_generic.c
+++ work/drivers/ata/ata_generic.c
@@ -83,7 +83,7 @@ static int generic_set_mode(struct ata_p
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
- if (ata_dev_ready(dev)) {
+ if (ata_dev_enabled(dev)) {
/* We don't really care */
dev->pio_mode = XFER_PIO_0;
dev->dma_mode = XFER_MW_DMA_0;
@@ -119,10 +119,6 @@ static struct scsi_host_template generic
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations generic_port_ops = {
Index: work/drivers/ata/ata_piix.c
===================================================================
--- work.orig/drivers/ata/ata_piix.c
+++ work/drivers/ata/ata_piix.c
@@ -275,10 +275,6 @@ static struct scsi_host_template piix_sh
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static const struct ata_port_operations piix_pata_ops = {
Index: work/drivers/ata/libata-core.c
===================================================================
--- work.orig/drivers/ata/libata-core.c
+++ work/drivers/ata/libata-core.c
@@ -2607,7 +2607,7 @@ int ata_do_set_mode(struct ata_port *ap,
dev = &ap->device[i];
/* don't update suspended devices' xfer mode */
- if (!ata_dev_ready(dev))
+ if (!ata_dev_enabled(dev))
continue;
rc = ata_dev_set_mode(dev);
@@ -5504,37 +5504,11 @@ static int ata_host_request_pm(struct at
*/
int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
{
- int i, j, rc;
+ int rc;
rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1);
- if (rc)
- goto fail;
-
- /* EH is quiescent now. Fail if we have any ready device.
- * This happens if hotplug occurs between completion of device
- * suspension and here.
- */
- for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap = host->ports[i];
-
- for (j = 0; j < ATA_MAX_DEVICES; j++) {
- struct ata_device *dev = &ap->device[j];
-
- if (ata_dev_ready(dev)) {
- ata_port_printk(ap, KERN_WARNING,
- "suspend failed, device %d "
- "still active\n", dev->devno);
- rc = -EBUSY;
- goto fail;
- }
- }
- }
-
- host->dev->power.power_state = mesg;
- return 0;
-
- fail:
- ata_host_resume(host);
+ if (rc == 0)
+ host->dev->power.power_state = mesg;
return rc;
}
@@ -6488,11 +6462,6 @@ EXPORT_SYMBOL_GPL(ata_pci_default_filter
EXPORT_SYMBOL_GPL(ata_pci_clear_simplex);
#endif /* CONFIG_PCI */
-#ifdef CONFIG_PM
-EXPORT_SYMBOL_GPL(ata_scsi_device_suspend);
-EXPORT_SYMBOL_GPL(ata_scsi_device_resume);
-#endif /* CONFIG_PM */
-
EXPORT_SYMBOL_GPL(ata_eng_timeout);
EXPORT_SYMBOL_GPL(ata_port_schedule_eh);
EXPORT_SYMBOL_GPL(ata_port_abort);
Index: work/drivers/ata/libata-eh.c
===================================================================
--- work.orig/drivers/ata/libata-eh.c
+++ work/drivers/ata/libata-eh.c
@@ -55,29 +55,12 @@ static void ata_eh_finish(struct ata_por
#ifdef CONFIG_PM
static void ata_eh_handle_port_suspend(struct ata_port *ap);
static void ata_eh_handle_port_resume(struct ata_port *ap);
-static int ata_eh_suspend(struct ata_port *ap,
- struct ata_device **r_failed_dev);
-static void ata_eh_prep_resume(struct ata_port *ap);
-static int ata_eh_resume(struct ata_port *ap, struct ata_device
**r_failed_dev);
#else /* CONFIG_PM */
static void ata_eh_handle_port_suspend(struct ata_port *ap)
{ }
static void ata_eh_handle_port_resume(struct ata_port *ap)
{ }
-
-static int ata_eh_suspend(struct ata_port *ap, struct ata_device
**r_failed_dev)
-{
- return 0;
-}
-
-static void ata_eh_prep_resume(struct ata_port *ap)
-{ }
-
-static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev)
-{
- return 0;
-}
#endif /* CONFIG_PM */
static void ata_ering_record(struct ata_ering *ering, int is_io,
@@ -1757,7 +1740,7 @@ static int ata_eh_revalidate_and_attach(
if (ehc->i.flags & ATA_EHI_DID_RESET)
readid_flags |= ATA_READID_POSTRESET;
- if (action & ATA_EH_REVALIDATE && ata_dev_ready(dev)) {
+ if ((action & ATA_EH_REVALIDATE) && ata_dev_enabled(dev)) {
if (ata_port_offline(ap)) {
rc = -EIO;
break;
@@ -1821,166 +1804,6 @@ static int ata_eh_revalidate_and_attach(
return rc;
}
-#ifdef CONFIG_PM
-/**
- * ata_eh_suspend - handle suspend EH action
- * @ap: target host port
- * @r_failed_dev: result parameter to indicate failing device
- *
- * Handle suspend EH action. Disk devices are spinned down and
- * other types of devices are just marked suspended. Once
- * suspended, no EH action to the device is allowed until it is
- * resumed.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * 0 on success, -errno otherwise
- */
-static int ata_eh_suspend(struct ata_port *ap, struct ata_device
**r_failed_dev)
-{
- struct ata_device *dev;
- int i, rc = 0;
-
- DPRINTK("ENTER\n");
-
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- unsigned long flags;
- unsigned int action, err_mask;
-
- dev = &ap->device[i];
- action = ata_eh_dev_action(dev);
-
- if (!ata_dev_enabled(dev) || !(action & ATA_EH_SUSPEND))
- continue;
-
- WARN_ON(dev->flags & ATA_DFLAG_SUSPENDED);
-
- ata_eh_about_to_do(ap, dev, ATA_EH_SUSPEND);
-
- if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) {
- /* flush cache */
- rc = ata_flush_cache(dev);
- if (rc)
- break;
-
- /* spin down */
- err_mask = ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1);
- if (err_mask) {
- ata_dev_printk(dev, KERN_ERR, "failed to "
- "spin down (err_mask=0x%x)\n",
- err_mask);
- rc = -EIO;
- break;
- }
- }
-
- spin_lock_irqsave(ap->lock, flags);
- dev->flags |= ATA_DFLAG_SUSPENDED;
- spin_unlock_irqrestore(ap->lock, flags);
-
- ata_eh_done(ap, dev, ATA_EH_SUSPEND);
- }
-
- if (rc)
- *r_failed_dev = dev;
-
- DPRINTK("EXIT\n");
- return rc;
-}
-
-/**
- * ata_eh_prep_resume - prep for resume EH action
- * @ap: target host port
- *
- * Clear SUSPENDED in preparation for scheduled resume actions.
- * This allows other parts of EH to access the devices being
- * resumed.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- */
-static void ata_eh_prep_resume(struct ata_port *ap)
-{
- struct ata_device *dev;
- unsigned long flags;
- int i;
-
- DPRINTK("ENTER\n");
-
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- unsigned int action;
-
- dev = &ap->device[i];
- action = ata_eh_dev_action(dev);
-
- if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME))
- continue;
-
- spin_lock_irqsave(ap->lock, flags);
- dev->flags &= ~ATA_DFLAG_SUSPENDED;
- spin_unlock_irqrestore(ap->lock, flags);
- }
-
- DPRINTK("EXIT\n");
-}
-
-/**
- * ata_eh_resume - handle resume EH action
- * @ap: target host port
- * @r_failed_dev: result parameter to indicate failing device
- *
- * Handle resume EH action. Target devices are already reset and
- * revalidated. Spinning up is the only operation left.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * 0 on success, -errno otherwise
- */
-static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev)
-{
- struct ata_device *dev;
- int i, rc = 0;
-
- DPRINTK("ENTER\n");
-
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- unsigned int action, err_mask;
-
- dev = &ap->device[i];
- action = ata_eh_dev_action(dev);
-
- if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME))
- continue;
-
- ata_eh_about_to_do(ap, dev, ATA_EH_RESUME);
-
- if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) {
- err_mask = ata_do_simple_cmd(dev,
- ATA_CMD_IDLEIMMEDIATE);
- if (err_mask) {
- ata_dev_printk(dev, KERN_ERR, "failed to "
- "spin up (err_mask=0x%x)\n",
- err_mask);
- rc = -EIO;
- break;
- }
- }
-
- ata_eh_done(ap, dev, ATA_EH_RESUME);
- }
-
- if (rc)
- *r_failed_dev = dev;
-
- DPRINTK("EXIT\n");
- return 0;
-}
-#endif /* CONFIG_PM */
-
static int ata_port_nr_enabled(struct ata_port *ap)
{
int i, cnt = 0;
@@ -2006,17 +1829,6 @@ static int ata_eh_skip_recovery(struct a
struct ata_eh_context *ehc = &ap->eh_context;
int i;
- /* skip if all possible devices are suspended */
- for (i = 0; i < ata_port_max_devices(ap); i++) {
- struct ata_device *dev = &ap->device[i];
-
- if (!(dev->flags & ATA_DFLAG_SUSPENDED))
- break;
- }
-
- if (i == ata_port_max_devices(ap))
- return 1;
-
/* thaw frozen port, resume link and recover failed devices */
if ((ap->pflags & ATA_PFLAG_FROZEN) ||
(ehc->i.flags & ATA_EHI_RESUME_LINK) || ata_port_nr_enabled(ap))
@@ -2096,9 +1908,6 @@ static int ata_eh_recover(struct ata_por
if (ap->pflags & ATA_PFLAG_UNLOADING)
goto out;
- /* prep for resume */
- ata_eh_prep_resume(ap);
-
/* skip EH if possible. */
if (ata_eh_skip_recovery(ap))
ehc->i.action = 0;
@@ -2126,11 +1935,6 @@ static int ata_eh_recover(struct ata_por
if (rc)
goto dev_fail;
- /* resume devices */
- rc = ata_eh_resume(ap, &dev);
- if (rc)
- goto dev_fail;
-
/* configure transfer mode if necessary */
if (ehc->i.flags & ATA_EHI_SETMODE) {
rc = ata_set_mode(ap, &dev);
@@ -2139,11 +1943,6 @@ static int ata_eh_recover(struct ata_por
ehc->i.flags &= ~ATA_EHI_SETMODE;
}
- /* suspend devices */
- rc = ata_eh_suspend(ap, &dev);
- if (rc)
- goto dev_fail;
-
goto out;
dev_fail:
@@ -2339,22 +2138,13 @@ static void ata_eh_handle_port_suspend(s
*
* Resume @ap.
*
- * This function also waits upto one second until all devices
- * hanging off this port requests resume EH action. This is to
- * prevent invoking EH and thus reset multiple times on resume.
- *
- * On DPM resume, where some of devices might not be resumed
- * together, this may delay port resume upto one second, but such
- * DPM resumes are rare and 1 sec delay isn't too bad.
- *
* LOCKING:
* Kernel thread context (may sleep).
*/
static void ata_eh_handle_port_resume(struct ata_port *ap)
{
- unsigned long timeout;
unsigned long flags;
- int i, rc = 0;
+ int rc = 0;
/* are we resuming? */
spin_lock_irqsave(ap->lock, flags);
@@ -2365,31 +2155,12 @@ static void ata_eh_handle_port_resume(st
}
spin_unlock_irqrestore(ap->lock, flags);
- /* spurious? */
- if (!(ap->pflags & ATA_PFLAG_SUSPENDED))
- goto done;
+ WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
if (ap->ops->port_resume)
rc = ap->ops->port_resume(ap);
- /* give devices time to request EH */
- timeout = jiffies + HZ; /* 1s max */
- while (1) {
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- struct ata_device *dev = &ap->device[i];
- unsigned int action = ata_eh_dev_action(dev);
-
- if ((dev->flags & ATA_DFLAG_SUSPENDED) &&
- !(action & ATA_EH_RESUME))
- break;
- }
-
- if (i == ATA_MAX_DEVICES || time_after(jiffies, timeout))
- break;
- msleep(10);
- }
-
- done:
+ /* report result */
spin_lock_irqsave(ap->lock, flags);
ap->pflags &= ~(ATA_PFLAG_PM_PENDING | ATA_PFLAG_SUSPENDED);
if (ap->pm_result) {
Index: work/drivers/ata/libata-scsi.c
===================================================================
--- work.orig/drivers/ata/libata-scsi.c
+++ work/drivers/ata/libata-scsi.c
@@ -510,133 +510,6 @@ static void ata_dump_status(unsigned id,
}
}
-#ifdef CONFIG_PM
-/**
- * ata_scsi_device_suspend - suspend ATA device associated with sdev
- * @sdev: the SCSI device to suspend
- * @mesg: target power management message
- *
- * Request suspend EH action on the ATA device associated with
- * @sdev and wait for the operation to complete.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * 0 on success, -errno otherwise.
- */
-int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t mesg)
-{
- struct ata_port *ap = ata_shost_to_port(sdev->host);
- struct ata_device *dev = ata_scsi_find_dev(ap, sdev);
- unsigned long flags;
- unsigned int action;
- int rc = 0;
-
- if (!dev)
- goto out;
-
- spin_lock_irqsave(ap->lock, flags);
-
- /* wait for the previous resume to complete */
- while (dev->flags & ATA_DFLAG_SUSPENDED) {
- spin_unlock_irqrestore(ap->lock, flags);
- ata_port_wait_eh(ap);
- spin_lock_irqsave(ap->lock, flags);
- }
-
- /* if @sdev is already detached, nothing to do */
- if (sdev->sdev_state == SDEV_OFFLINE ||
- sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL)
- goto out_unlock;
-
- /* request suspend */
- action = ATA_EH_SUSPEND;
- if (mesg.event != PM_EVENT_SUSPEND)
- action |= ATA_EH_PM_FREEZE;
- ap->eh_info.dev_action[dev->devno] |= action;
- ap->eh_info.flags |= ATA_EHI_QUIET;
- ata_port_schedule_eh(ap);
-
- spin_unlock_irqrestore(ap->lock, flags);
-
- /* wait for EH to do the job */
- ata_port_wait_eh(ap);
-
- spin_lock_irqsave(ap->lock, flags);
-
- /* If @sdev is still attached but the associated ATA device
- * isn't suspended, the operation failed.
- */
- if (sdev->sdev_state != SDEV_OFFLINE &&
- sdev->sdev_state != SDEV_CANCEL && sdev->sdev_state != SDEV_DEL &&
- !(dev->flags & ATA_DFLAG_SUSPENDED))
- rc = -EIO;
-
- out_unlock:
- spin_unlock_irqrestore(ap->lock, flags);
- out:
- if (rc == 0)
- sdev->sdev_gendev.power.power_state = mesg;
- return rc;
-}
-
-/**
- * ata_scsi_device_resume - resume ATA device associated with sdev
- * @sdev: the SCSI device to resume
- *
- * Request resume EH action on the ATA device associated with
- * @sdev and return immediately. This enables parallel
- * wakeup/spinup of devices.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * 0.
- */
-int ata_scsi_device_resume(struct scsi_device *sdev)
-{
- struct ata_port *ap = ata_shost_to_port(sdev->host);
- struct ata_device *dev = ata_scsi_find_dev(ap, sdev);
- struct ata_eh_info *ehi = &ap->eh_info;
- unsigned long flags;
- unsigned int action;
-
- if (!dev)
- goto out;
-
- spin_lock_irqsave(ap->lock, flags);
-
- /* if @sdev is already detached, nothing to do */
- if (sdev->sdev_state == SDEV_OFFLINE ||
- sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL)
- goto out_unlock;
-
- /* request resume */
- action = ATA_EH_RESUME;
- if (sdev->sdev_gendev.power.power_state.event == PM_EVENT_SUSPEND)
- __ata_ehi_hotplugged(ehi);
- else
- action |= ATA_EH_PM_FREEZE | ATA_EH_SOFTRESET;
- ehi->dev_action[dev->devno] |= action;
-
- /* We don't want autopsy and verbose EH messages. Disable
- * those if we're the only device on this link.
- */
- if (ata_port_max_devices(ap) == 1)
- ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
-
- ata_port_schedule_eh(ap);
-
- out_unlock:
- spin_unlock_irqrestore(ap->lock, flags);
- out:
- sdev->sdev_gendev.power.power_state = PMSG_ON;
- return 0;
-}
-#endif /* CONFIG_PM */
-
/**
* ata_to_sense_error - convert ATA error to SCSI error
* @id: ATA device number
@@ -929,6 +802,8 @@ int ata_scsi_slave_config(struct scsi_de
blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD);
+ sdev->manage_start_stop = 1;
+
if (dev)
ata_scsi_dev_config(sdev, dev);
Index: work/drivers/ata/pata_ali.c
===================================================================
--- work.orig/drivers/ata/pata_ali.c
+++ work/drivers/ata/pata_ali.c
@@ -345,10 +345,6 @@ static struct scsi_host_template ali_sht
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
/*
Index: work/drivers/ata/pata_amd.c
===================================================================
--- work.orig/drivers/ata/pata_amd.c
+++ work/drivers/ata/pata_amd.c
@@ -334,10 +334,6 @@ static struct scsi_host_template amd_sht
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations amd33_port_ops = {
Index: work/drivers/ata/pata_atiixp.c
===================================================================
--- work.orig/drivers/ata/pata_atiixp.c
+++ work/drivers/ata/pata_atiixp.c
@@ -229,10 +229,6 @@ static struct scsi_host_template atiixp_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations atiixp_port_ops = {
Index: work/drivers/ata/pata_cmd640.c
===================================================================
--- work.orig/drivers/ata/pata_cmd640.c
+++ work/drivers/ata/pata_cmd640.c
@@ -181,8 +181,6 @@ static struct scsi_host_template cmd640_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
};
static struct ata_port_operations cmd640_port_ops = {
Index: work/drivers/ata/pata_cmd64x.c
===================================================================
--- work.orig/drivers/ata/pata_cmd64x.c
+++ work/drivers/ata/pata_cmd64x.c
@@ -266,10 +266,6 @@ static struct scsi_host_template cmd64x_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations cmd64x_port_ops = {
Index: work/drivers/ata/pata_cs5520.c
===================================================================
--- work.orig/drivers/ata/pata_cs5520.c
+++ work/drivers/ata/pata_cs5520.c
@@ -155,10 +155,6 @@ static struct scsi_host_template cs5520_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations cs5520_port_ops = {
Index: work/drivers/ata/pata_cs5530.c
===================================================================
--- work.orig/drivers/ata/pata_cs5530.c
+++ work/drivers/ata/pata_cs5530.c
@@ -176,10 +176,6 @@ static struct scsi_host_template cs5530_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations cs5530_port_ops = {
Index: work/drivers/ata/pata_cs5535.c
===================================================================
--- work.orig/drivers/ata/pata_cs5535.c
+++ work/drivers/ata/pata_cs5535.c
@@ -185,10 +185,6 @@ static struct scsi_host_template cs5535_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations cs5535_port_ops = {
Index: work/drivers/ata/pata_cypress.c
===================================================================
--- work.orig/drivers/ata/pata_cypress.c
+++ work/drivers/ata/pata_cypress.c
@@ -136,10 +136,6 @@ static struct scsi_host_template cy82c69
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations cy82c693_port_ops = {
Index: work/drivers/ata/pata_efar.c
===================================================================
--- work.orig/drivers/ata/pata_efar.c
+++ work/drivers/ata/pata_efar.c
@@ -246,10 +246,6 @@ static struct scsi_host_template efar_sh
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static const struct ata_port_operations efar_ops = {
Index: work/drivers/ata/pata_hpt366.c
===================================================================
--- work.orig/drivers/ata/pata_hpt366.c
+++ work/drivers/ata/pata_hpt366.c
@@ -332,10 +332,6 @@ static struct scsi_host_template hpt36x_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
/*
Index: work/drivers/ata/pata_hpt3x3.c
===================================================================
--- work.orig/drivers/ata/pata_hpt3x3.c
+++ work/drivers/ata/pata_hpt3x3.c
@@ -100,10 +100,6 @@ static struct scsi_host_template hpt3x3_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations hpt3x3_port_ops = {
Index: work/drivers/ata/pata_it8213.c
===================================================================
--- work.orig/drivers/ata/pata_it8213.c
+++ work/drivers/ata/pata_it8213.c
@@ -255,10 +255,6 @@ static struct scsi_host_template it8213_
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static const struct ata_port_operations it8213_ops = {
Index: work/drivers/ata/pata_it821x.c
===================================================================
--- work.orig/drivers/ata/pata_it821x.c
+++ work/drivers/ata/pata_it821x.c
@@ -620,10 +620,6 @@ static struct scsi_host_template it821x_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations it821x_smart_port_ops = {
Index: work/drivers/ata/pata_ixp4xx_cf.c
===================================================================
--- work.orig/drivers/ata/pata_ixp4xx_cf.c
+++ work/drivers/ata/pata_ixp4xx_cf.c
@@ -31,7 +31,7 @@ static int ixp4xx_set_mode(struct ata_po
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
- if (ata_dev_ready(dev)) {
+ if (ata_dev_enabled(dev)) {
ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
dev->pio_mode = XFER_PIO_0;
dev->xfer_mode = XFER_PIO_0;
Index: work/drivers/ata/pata_jmicron.c
===================================================================
--- work.orig/drivers/ata/pata_jmicron.c
+++ work/drivers/ata/pata_jmicron.c
@@ -137,10 +137,6 @@ static struct scsi_host_template jmicron
.slave_destroy = ata_scsi_slave_destroy,
/* Use standard CHS mapping rules */
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static const struct ata_port_operations jmicron_ops = {
Index: work/drivers/ata/pata_marvell.c
===================================================================
--- work.orig/drivers/ata/pata_marvell.c
+++ work/drivers/ata/pata_marvell.c
@@ -104,10 +104,6 @@ static struct scsi_host_template marvell
.slave_destroy = ata_scsi_slave_destroy,
/* Use standard CHS mapping rules */
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static const struct ata_port_operations marvell_ops = {
Index: work/drivers/ata/pata_mpc52xx.c
===================================================================
--- work.orig/drivers/ata/pata_mpc52xx.c
+++ work/drivers/ata/pata_mpc52xx.c
@@ -280,10 +280,6 @@ static struct scsi_host_template mpc52xx
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static struct ata_port_operations mpc52xx_ata_port_ops = {
Index: work/drivers/ata/pata_mpiix.c
===================================================================
--- work.orig/drivers/ata/pata_mpiix.c
+++ work/drivers/ata/pata_mpiix.c
@@ -164,10 +164,6 @@ static struct scsi_host_template mpiix_s
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations mpiix_port_ops = {
Index: work/drivers/ata/pata_netcell.c
===================================================================
--- work.orig/drivers/ata/pata_netcell.c
+++ work/drivers/ata/pata_netcell.c
@@ -63,10 +63,6 @@ static struct scsi_host_template netcell
.slave_destroy = ata_scsi_slave_destroy,
/* Use standard CHS mapping rules */
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static const struct ata_port_operations netcell_ops = {
Index: work/drivers/ata/pata_ns87410.c
===================================================================
--- work.orig/drivers/ata/pata_ns87410.c
+++ work/drivers/ata/pata_ns87410.c
@@ -156,10 +156,6 @@ static struct scsi_host_template ns87410
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations ns87410_port_ops = {
Index: work/drivers/ata/pata_oldpiix.c
===================================================================
--- work.orig/drivers/ata/pata_oldpiix.c
+++ work/drivers/ata/pata_oldpiix.c
@@ -232,10 +232,6 @@ static struct scsi_host_template oldpiix
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static const struct ata_port_operations oldpiix_pata_ops = {
Index: work/drivers/ata/pata_opti.c
===================================================================
--- work.orig/drivers/ata/pata_opti.c
+++ work/drivers/ata/pata_opti.c
@@ -177,10 +177,6 @@ static struct scsi_host_template opti_sh
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations opti_port_ops = {
Index: work/drivers/ata/pata_optidma.c
===================================================================
--- work.orig/drivers/ata/pata_optidma.c
+++ work/drivers/ata/pata_optidma.c
@@ -360,10 +360,6 @@ static struct scsi_host_template optidma
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations optidma_port_ops = {
Index: work/drivers/ata/pata_pdc202xx_old.c
===================================================================
--- work.orig/drivers/ata/pata_pdc202xx_old.c
+++ work/drivers/ata/pata_pdc202xx_old.c
@@ -244,10 +244,6 @@ static struct scsi_host_template pdc202x
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations pdc2024x_port_ops = {
Index: work/drivers/ata/pata_radisys.c
===================================================================
--- work.orig/drivers/ata/pata_radisys.c
+++ work/drivers/ata/pata_radisys.c
@@ -200,10 +200,6 @@ static struct scsi_host_template radisys
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static const struct ata_port_operations radisys_pata_ops = {
Index: work/drivers/ata/pata_rz1000.c
===================================================================
--- work.orig/drivers/ata/pata_rz1000.c
+++ work/drivers/ata/pata_rz1000.c
@@ -40,7 +40,7 @@ static int rz1000_set_mode(struct ata_po
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
- if (ata_dev_ready(dev)) {
+ if (ata_dev_enabled(dev)) {
/* We don't really care */
dev->pio_mode = XFER_PIO_0;
dev->xfer_mode = XFER_PIO_0;
@@ -69,10 +69,6 @@ static struct scsi_host_template rz1000_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations rz1000_port_ops = {
Index: work/drivers/ata/pata_sc1200.c
===================================================================
--- work.orig/drivers/ata/pata_sc1200.c
+++ work/drivers/ata/pata_sc1200.c
@@ -194,10 +194,6 @@ static struct scsi_host_template sc1200_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations sc1200_port_ops = {
Index: work/drivers/ata/pata_scc.c
===================================================================
--- work.orig/drivers/ata/pata_scc.c
+++ work/drivers/ata/pata_scc.c
@@ -984,10 +984,6 @@ static struct scsi_host_template scc_sht
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static const struct ata_port_operations scc_pata_ops = {
Index: work/drivers/ata/pata_serverworks.c
===================================================================
--- work.orig/drivers/ata/pata_serverworks.c
+++ work/drivers/ata/pata_serverworks.c
@@ -313,10 +313,6 @@ static struct scsi_host_template serverw
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations serverworks_osb4_port_ops = {
Index: work/drivers/ata/pata_sil680.c
===================================================================
--- work.orig/drivers/ata/pata_sil680.c
+++ work/drivers/ata/pata_sil680.c
@@ -230,10 +230,6 @@ static struct scsi_host_template sil680_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static struct ata_port_operations sil680_port_ops = {
Index: work/drivers/ata/pata_sis.c
===================================================================
--- work.orig/drivers/ata/pata_sis.c
+++ work/drivers/ata/pata_sis.c
@@ -520,10 +520,6 @@ static struct scsi_host_template sis_sht
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static const struct ata_port_operations sis_133_ops = {
Index: work/drivers/ata/pata_triflex.c
===================================================================
--- work.orig/drivers/ata/pata_triflex.c
+++ work/drivers/ata/pata_triflex.c
@@ -192,10 +192,6 @@ static struct scsi_host_template triflex
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations triflex_port_ops = {
Index: work/drivers/ata/pata_via.c
===================================================================
--- work.orig/drivers/ata/pata_via.c
+++ work/drivers/ata/pata_via.c
@@ -300,10 +300,6 @@ static struct scsi_host_template via_sht
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations via_port_ops = {
Index: work/drivers/ata/sata_inic162x.c
===================================================================
--- work.orig/drivers/ata/sata_inic162x.c
+++ work/drivers/ata/sata_inic162x.c
@@ -135,10 +135,6 @@ static struct scsi_host_template inic_sh
.slave_configure = inic_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static const int scr_map[] = {
Index: work/drivers/ata/sata_nv.c
===================================================================
--- work.orig/drivers/ata/sata_nv.c
+++ work/drivers/ata/sata_nv.c
@@ -322,10 +322,6 @@ static struct scsi_host_template nv_sht
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static struct scsi_host_template nv_adma_sht = {
@@ -344,10 +340,6 @@ static struct scsi_host_template nv_adma
.slave_configure = nv_adma_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static const struct ata_port_operations nv_generic_ops = {
Index: work/drivers/ata/sata_sil.c
===================================================================
--- work.orig/drivers/ata/sata_sil.c
+++ work/drivers/ata/sata_sil.c
@@ -183,10 +183,6 @@ static struct scsi_host_template sil_sht
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static const struct ata_port_operations sil_ops = {
Index: work/drivers/ata/sata_sil24.c
===================================================================
--- work.orig/drivers/ata/sata_sil24.c
+++ work/drivers/ata/sata_sil24.c
@@ -381,10 +381,6 @@ static struct scsi_host_template sil24_s
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static const struct ata_port_operations sil24_ops = {
Index: work/include/linux/libata.h
===================================================================
--- work.orig/include/linux/libata.h
+++ work/include/linux/libata.h
@@ -140,7 +140,6 @@ enum {
ATA_DFLAG_PIO = (1 << 8), /* device limited to PIO mode */
ATA_DFLAG_NCQ_OFF = (1 << 9), /* device limited to non-NCQ mode */
- ATA_DFLAG_SUSPENDED = (1 << 10), /* device suspended */
ATA_DFLAG_INIT_MASK = (1 << 16) - 1,
ATA_DFLAG_DETACH = (1 << 16),
@@ -267,13 +266,9 @@ enum {
ATA_EH_REVALIDATE = (1 << 0),
ATA_EH_SOFTRESET = (1 << 1),
ATA_EH_HARDRESET = (1 << 2),
- ATA_EH_SUSPEND = (1 << 3),
- ATA_EH_RESUME = (1 << 4),
- ATA_EH_PM_FREEZE = (1 << 5),
ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
- ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE | ATA_EH_SUSPEND |
- ATA_EH_RESUME | ATA_EH_PM_FREEZE,
+ ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE,
/* ata_eh_info->flags */
ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */
@@ -753,8 +748,6 @@ extern int sata_scr_write_flush(struct a
extern int ata_port_online(struct ata_port *ap);
extern int ata_port_offline(struct ata_port *ap);
#ifdef CONFIG_PM
-extern int ata_scsi_device_resume(struct scsi_device *);
-extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t mesg);
extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg);
extern void ata_host_resume(struct ata_host *host);
#endif
@@ -1026,11 +1019,6 @@ static inline unsigned int ata_dev_absen
return ata_class_absent(dev->class);
}
-static inline unsigned int ata_dev_ready(const struct ata_device *dev)
-{
- return ata_dev_enabled(dev) && !(dev->flags & ATA_DFLAG_SUSPENDED);
-}
-
/*
* port helpers
*/
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
