For some reason, sata_via is missing PM hooks. Add them.
Signed-off-by: Tejun Heo <[EMAIL PROTECTED]>
---
This patch is against 2.6.21 but you can use it over 2.6.20 too. Does
this fix your problem?
Index: tree0/drivers/ata/sata_via.c
===================================================================
--- tree0.orig/drivers/ata/sata_via.c
+++ tree0/drivers/ata/sata_via.c
@@ -97,6 +97,10 @@ static struct pci_driver svia_pci_driver
.name = DRV_NAME,
.id_table = svia_pci_tbl,
.probe = svia_init_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
+#endif
.remove = ata_pci_remove_one,
};
@@ -116,6 +120,10 @@ static struct scsi_host_template svia_sh
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
+ .suspend = ata_scsi_device_suspend,
+ .resume = ata_scsi_device_resume,
+#endif
};
static const struct ata_port_operations vt6420_sata_ops = {
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
