Separate out ata_dev_reread_id() from ata_dev_revalidate().
ata_dev_reread_id() reads IDENTIFY page and determines whether the
same device is still there. ata_dev_revalidate() reconfigures after
reread completes. This will be used by ACPI update.
Signed-off-by: Tejun Heo <[EMAIL PROTECTED]>
---
drivers/ata/libata-core.c | 47 ++++++++++++++++++++++++++++++++------------
drivers/ata/libata.h | 3 +-
2 files changed, 36 insertions(+), 14 deletions(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index ca67484..9d0d753 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3597,8 +3597,8 @@ static int ata_dev_same_device(struct ata_device *dev,
unsigned int new_class,
}
/**
- * ata_dev_revalidate - Revalidate ATA device
- * @dev: device to revalidate
+ * ata_dev_reread_id - Re-read IDENTIFY data
+ * @adev: target ATA device
* @readid_flags: read ID flags
*
* Re-read IDENTIFY page and make sure @dev is still attached to
@@ -3610,29 +3610,50 @@ static int ata_dev_same_device(struct ata_device *dev,
unsigned int new_class,
* RETURNS:
* 0 on success, negative errno otherwise
*/
-int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags)
+int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags)
{
unsigned int class = dev->class;
u16 *id = (void *)dev->ap->sector_buf;
int rc;
- if (!ata_dev_enabled(dev)) {
- rc = -ENODEV;
- goto fail;
- }
-
/* read ID data */
rc = ata_dev_read_id(dev, &class, readid_flags, id);
if (rc)
- goto fail;
+ return rc;
/* is the device still there? */
- if (!ata_dev_same_device(dev, class, id)) {
- rc = -ENODEV;
- goto fail;
- }
+ if (!ata_dev_same_device(dev, class, id))
+ return -ENODEV;
memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS);
+ return 0;
+}
+
+/**
+ * ata_dev_revalidate - Revalidate ATA device
+ * @dev: device to revalidate
+ * @readid_flags: read ID flags
+ *
+ * Re-read IDENTIFY page, make sure @dev is still attached to the
+ * port and reconfigure it according to the new IDENTIFY page.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * 0 on success, negative errno otherwise
+ */
+int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags)
+{
+ int rc;
+
+ if (!ata_dev_enabled(dev))
+ return -ENODEV;
+
+ /* re-read ID */
+ rc = ata_dev_reread_id(dev, readid_flags);
+ if (rc)
+ goto fail;
/* configure device according to the new ID */
rc = ata_dev_configure(dev);
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 5f4d40c..c40665a 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -75,7 +75,8 @@ extern unsigned ata_exec_internal_sg(struct ata_device *dev,
extern unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd);
extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
unsigned int flags, u16 *id);
-extern int ata_dev_revalidate(struct ata_device *dev, unsigned int flags);
+extern int ata_dev_reread_id(struct ata_device *dev, unsigned int
readid_flags);
+extern int ata_dev_revalidate(struct ata_device *dev, unsigned int
readid_flags);
extern int ata_dev_configure(struct ata_device *dev);
extern int sata_down_spd_limit(struct ata_port *ap);
extern int sata_set_spd_needed(struct ata_port *ap);
--
1.5.0.3
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
