Get rid of the init_dma() method (which had no particular reason to exist) by
folding it into the init_hwif() method. While at it, also perform some cleanup
in the latter method:
- get rid of the useless clearing of hwif->autodma;
- fold the serialization code into one 'if' statement;
- fold setting the drives' 'autotune' and 'autodma' fields into the single
statements...
Signed-off-by: Sergei Shtylyov <[EMAIL PROTECTED]>
---
The patch should apply somewhere near the start of pata-2.6 patchset.
Warning: the patch has only been compile tested.
drivers/ide/pci/aec62xx.c | 63 ++++++++++++++++++----------------------------
1 files changed, 26 insertions(+), 37 deletions(-)
Index: linux-2.6/drivers/ide/pci/aec62xx.c
===================================================================
--- linux-2.6.orig/drivers/ide/pci/aec62xx.c
+++ linux-2.6/drivers/ide/pci/aec62xx.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/aec62xx.c Version 0.22 Apr 23, 2007
+ * linux/drivers/ide/pci/aec62xx.c Version 0.23 Apr 27, 2007
*
* Copyright (C) 1999-2002 Andre Hedrick <[EMAIL PROTECTED]>
* Copyright (C) 2007 MontaVista Software, Inc. <[EMAIL PROTECTED]>
@@ -224,21 +224,18 @@ static unsigned int __devinit init_chips
static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = hwif->pci_dev;
+ u8 reg54 = 0, mask = hwif->channel ? 0xf0 : 0x0f;
+ unsigned long flags;
- hwif->autodma = 0;
hwif->tuneproc = &aec62xx_tune_drive;
hwif->speedproc = &aec62xx_tune_chipset;
- if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
- hwif->serialized = hwif->channel;
-
- if (hwif->mate)
- hwif->mate->serialized = hwif->serialized;
+ if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF && hwif->mate)
+ hwif->mate->serialized = hwif->serialized = 1;
if (!hwif->dma_base) {
- hwif->drives[0].autotune = 1;
- hwif->drives[1].autotune = 1;
+ hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
return;
}
@@ -248,32 +245,29 @@ static void __devinit init_hwif_aec62xx(
hwif->ide_dma_check = &aec62xx_config_drive_xfer_rate;
hwif->ide_dma_lostirq = &aec62xx_irq_timeout;
- if (!noautodma)
- hwif->autodma = 1;
- hwif->drives[0].autodma = hwif->autodma;
- hwif->drives[1].autodma = hwif->autodma;
-}
-
-static void __devinit init_dma_aec62xx(ide_hwif_t *hwif, unsigned long dmabase)
-{
- struct pci_dev *dev = hwif->pci_dev;
-
- if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
- u8 reg54h = 0;
- unsigned long flags;
-
+ switch (dev->device) {
+ case PCI_DEVICE_ID_ARTOP_ATP850UF:
spin_lock_irqsave(&ide_lock, flags);
- pci_read_config_byte(dev, 0x54, ®54h);
- pci_write_config_byte(dev, 0x54, reg54h & ~(hwif->channel ?
0xF0 : 0x0F));
+ pci_read_config_byte (dev, 0x54, ®54);
+ pci_write_config_byte(dev, 0x54, (reg54 & ~mask));
spin_unlock_irqrestore(&ide_lock, flags);
- } else {
- u8 ata66 = 0;
- pci_read_config_byte(hwif->pci_dev, 0x49, &ata66);
- if (!(hwif->udma_four))
- hwif->udma_four = (ata66&(hwif->channel?0x02:0x01))?0:1;
+ break;
+ case PCI_DEVICE_ID_ARTOP_ATP865:
+ case PCI_DEVICE_ID_ARTOP_ATP865R:
+ case PCI_DEVICE_ID_ARTOP_ATP860:
+ case PCI_DEVICE_ID_ARTOP_ATP860R:
+ if (!hwif->udma_four) {
+ u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
+
+ pci_read_config_byte(hwif->pci_dev, 0x49, &ata66);
+ hwif->udma_four = (ata66 & mask) ? 0 : 1;
+ }
+ break;
}
- ide_setup_dma(hwif, dmabase, 8);
+ if (!noautodma)
+ hwif->autodma = 1;
+ hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
}
static int __devinit init_setup_aec62xx(struct pci_dev *dev, ide_pci_device_t
*d)
@@ -300,7 +294,6 @@ static ide_pci_device_t aec62xx_chipsets
.init_setup = init_setup_aec62xx,
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
- .init_dma = init_dma_aec62xx,
.channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
@@ -311,7 +304,6 @@ static ide_pci_device_t aec62xx_chipsets
.init_setup = init_setup_aec62xx,
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
- .init_dma = init_dma_aec62xx,
.channels = 2,
.autodma = NOAUTODMA,
.bootable = OFF_BOARD,
@@ -321,7 +313,6 @@ static ide_pci_device_t aec62xx_chipsets
.init_setup = init_setup_aec62xx,
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
- .init_dma = init_dma_aec62xx,
.channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
@@ -332,7 +323,6 @@ static ide_pci_device_t aec62xx_chipsets
.init_setup = init_setup_aec6x80,
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
- .init_dma = init_dma_aec62xx,
.channels = 2,
.autodma = AUTODMA,
.bootable = OFF_BOARD,
@@ -342,7 +332,6 @@ static ide_pci_device_t aec62xx_chipsets
.init_setup = init_setup_aec6x80,
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
- .init_dma = init_dma_aec62xx,
.channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
