> I recently installed a new disk on the same computer. This one is a Hitchi
> HDS721616PLAT80.
>
> When this disk is connected to the ICH5 controller, the following error
> lines appear on boot:
>
> -------------------------------------------------------------------
> hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
> hda: drive_cmd: error=0x04 { DriveStatusError }
> ide: failed opcode was: 0xb0
Your new drive rejected a SMART command. It was asked (by user space I
suspect - ie smartd) to do some kind of smart operation and reported
51/04 - which is basically 'I do not know/support the command you have
asked me to perform) - amd opcode 0xB0 is smart.
> The drive is working perfectly. I even verified it with a tool provided by
> the manufacturer. SMART also does not report any error .
> The same disk gives no error whatsoever when connected to a ITE8212 IDE
> Controler present on the same computer.
The IT8212 with raid firmware doesn't support SMART so any smart
configuration funnies would be hidden
Alan
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
