> Does piix driver work? If so, can you post boot dmesg and the result
> of
> 'hdparm -I /dev/hdX'?
I've still been battling to get this hardware detected with any of the
drivers mentioned previously except the newer libata piix driver. However
when using the old driver and using "all-generic-ide" and "irqpoll" as
kernel parameters I now have the device being detected albeit complaining
about lost interrupts and DMA timeouts. Here is the output from the hdparm
-I /dev/hda that you requested:
/dev/hda:
ATA device, with non-removable media
Model Number: CF CARD 512MB
Serial Number: CF512 0001943B
Firmware Revision: 20070131
Standards:
Likely used: 5
Configuration:
Logical max current
cylinders 983 983
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 990864
LBA user addressable sectors: 990864
device size with M = 1024*1024: 483 MBytes
device size with M = 1000*1000: 507 MBytes
Capabilities:
LBA, IORDY(may be)(cannot be disabled)
bytes avail on r/w long: 4 Queue depth: 1
Standby timer values: spec'd by Vendor
R/W multiple sector transfer: Max = 1 Current = 1
DMA: mdma0 mdma1 *mdma2
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
HW reset results:
CBLID- below Vih
Device num = 0
Many thanks for your help.
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
