The SiS966 has one additional PCI-ID 1180.
If the chipset is using this PCI-ID, the primary channel is connected to the
first
PATA-port. The secondary channel is connected to SATA-ports in IDE emulation
mode.
The legacy IO-ports are used.
the including of the PCI-ID into pata_sis is not sufficient, because the legacy
driver
in drivers/ide is initialized before pata_sis.
Signed-off-by: Uwe Koziolek <[EMAIL PROTECTED]>
--- a/include/linux/pci_ids.h 2007-07-03 19:17:44.000000000 +0200
+++ b/include/linux/pci_ids.h 2007-07-04 21:42:16.000000000 +0200
@@ -661,6 +661,7 @@
#define PCI_DEVICE_ID_SI_965 0x0965
#define PCI_DEVICE_ID_SI_966 0x0966
#define PCI_DEVICE_ID_SI_968 0x0968
+#define PCI_DEVICE_ID_SI_1180 0x1180
#define PCI_DEVICE_ID_SI_5511 0x5511
#define PCI_DEVICE_ID_SI_5513 0x5513
#define PCI_DEVICE_ID_SI_5517 0x5517
--- a/drivers/ide/pci/sis5513.c 2007-07-03 19:17:02.000000000 +0200
+++ b/drivers/ide/pci/sis5513.c 2007-07-04 21:34:56.000000000 +0200
@@ -872,6 +872,7 @@
static struct pci_device_id sis5513_pci_tbl[] = {
{ PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, PCI_ANY_ID, PCI_ANY_ID, 0,
0, 0},
{ PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5518, PCI_ANY_ID, PCI_ANY_ID, 0,
0, 0},
+ { PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_1180, PCI_ANY_ID, PCI_ANY_ID, 0,
0, 0},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, sis5513_pci_tbl);
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
