The relevant bits in the ctl register are HOB, SRST and nIEN.
- HOB is only used by ata_tf_read().
- For SRST, soft reset is not the duty of tf_load.
- For nIEN, explicit irq_on()/irq_off and freeze()/thaw() are provided.
Remove the implicit nIEN handling from ata_tf_load() since EH/HSM now
calls irq_on/irq_off explicitly. vsc_intr_mask_update() also removed
since now unused.
Signed-off-by: Albert Lee <[EMAIL PROTECTED]>
---
The bitmasks used by vsc_intr_mask_update() are different to the bit masks
in vsc_irq_on() and vsc_irq_off(). I don't know which one is more correct.
Maybe we need more test and see if vsc_irq_on()/vsc_irq_off() works for
turning irq on/off for polling pio.
diff -Nrup 05_rename_thaw_lldd/drivers/ata/libata-sff.c
06_tf_load_cleanup/drivers/ata/libata-sff.c
--- 05_rename_thaw_lldd/drivers/ata/libata-sff.c 2007-07-07
10:49:04.000000000 +0800
+++ 06_tf_load_cleanup/drivers/ata/libata-sff.c 2007-07-07 10:50:10.000000000
+0800
@@ -143,11 +143,13 @@ void ata_tf_load(struct ata_port *ap, co
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
- if (tf->ctl != ap->last_ctl) {
- iowrite8(tf->ctl, ioaddr->ctl_addr);
- ap->last_ctl = tf->ctl;
- ata_wait_idle(ap);
- }
+ /*
+ * The relevant bits in the ctl register are HOB, SRST and nIEN.
+ * HOB is only used by ata_tf_read().
+ * For SRST, soft reset is not the duty of tf_load.
+ * For nIEN, explicit ->irq_on() and ->irq_off are provided.
+ * That's why tf->ctl is ignored here.
+ */
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
iowrite8(tf->hob_feature, ioaddr->feature_addr);
diff -Nrup 05_rename_thaw_lldd/drivers/ata/pata_scc.c
06_tf_load_cleanup/drivers/ata/pata_scc.c
--- 05_rename_thaw_lldd/drivers/ata/pata_scc.c 2007-07-07 10:49:30.000000000
+0800
+++ 06_tf_load_cleanup/drivers/ata/pata_scc.c 2007-07-07 10:50:10.000000000
+0800
@@ -271,12 +271,6 @@ static void scc_tf_load (struct ata_port
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
- if (tf->ctl != ap->last_ctl) {
- out_be32(ioaddr->ctl_addr, tf->ctl);
- ap->last_ctl = tf->ctl;
- ata_wait_idle(ap);
- }
-
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
out_be32(ioaddr->feature_addr, tf->hob_feature);
out_be32(ioaddr->nsect_addr, tf->hob_nsect);
diff -Nrup 05_rename_thaw_lldd/drivers/ata/sata_svw.c
06_tf_load_cleanup/drivers/ata/sata_svw.c
--- 05_rename_thaw_lldd/drivers/ata/sata_svw.c 2007-07-07 10:49:30.000000000
+0800
+++ 06_tf_load_cleanup/drivers/ata/sata_svw.c 2007-07-07 10:50:10.000000000
+0800
@@ -125,11 +125,6 @@ static void k2_sata_tf_load(struct ata_p
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
- if (tf->ctl != ap->last_ctl) {
- writeb(tf->ctl, ioaddr->ctl_addr);
- ap->last_ctl = tf->ctl;
- ata_wait_idle(ap);
- }
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
writew(tf->feature | (((u16)tf->hob_feature) << 8),
ioaddr->feature_addr);
diff -Nrup 05_rename_thaw_lldd/drivers/ata/sata_vsc.c
06_tf_load_cleanup/drivers/ata/sata_vsc.c
--- 05_rename_thaw_lldd/drivers/ata/sata_vsc.c 2007-07-07 10:49:30.000000000
+0800
+++ 06_tf_load_cleanup/drivers/ata/sata_vsc.c 2007-07-07 10:50:10.000000000
+0800
@@ -137,36 +137,19 @@ static void vsc_irq_on(struct ata_port *
}
-static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl)
-{
- void __iomem *mask_addr;
- u8 mask;
-
- mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
- VSC_SATA_INT_MASK_OFFSET + ap->port_no;
- mask = readb(mask_addr);
- if (ctl & ATA_NIEN)
- mask |= 0x80;
- else
- mask &= 0x7F;
- writeb(mask, mask_addr);
-}
-
-
static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile
*tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
/*
- * The only thing the ctl register is used for is SRST.
- * That is not enabled or disabled via tf_load.
- * However, if ATA_NIEN is changed, then we need to change the
interrupt register.
+ * The relevant bits in the ctl register are HOB, SRST and nIEN.
+ * HOB is only used by ata_tf_read().
+ * For SRST, soft reset is not the duty of tf_load.
+ * For nIEN, explicit ->irq_on() and ->irq_off are provided.
+ * That's why tf->ctl is ignored here.
*/
- if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) {
- ap->last_ctl = tf->ctl;
- vsc_intr_mask_update(ap, tf->ctl & ATA_NIEN);
- }
+
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
writew(tf->feature | (((u16)tf->hob_feature) << 8),
ioaddr->feature_addr);
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
